Issue#9333 - Delete unused TIMING variable left over from OpenLDAP 2.0

tests/data/regressions/its4184/its4184

@@ -33,7 +33,7 @@ if test $RC != 0 ; then
 fi
 
 echo "Starting slapd on TCP/IP port $PORT1..."
-$SLAPD -f $CONF1 -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
+$SLAPD -f $CONF1 -h $URI1 -d $LVL > $LOG1 2>&1 &
 PID=$!
 if test $WAIT != 0 ; then
     echo PID $PID

tests/data/regressions/its4326/its4326

@@ -41,7 +41,7 @@ if test $RC != 0 ; then
 fi
 
 echo "Starting slapd on TCP/IP port $PORT1..."
-$SLAPD -f $CONF1 -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
+$SLAPD -f $CONF1 -h $URI1 -d $LVL > $LOG1 2>&1 &
 SERVERPID=$!
 if test $WAIT != 0 ; then
     echo SERVERPID $SERVERPID
@@ -71,7 +71,7 @@ fi
 
 echo "Starting proxy slapd on TCP/IP port $PORT2..."
 . $CONFFILTER $BACKEND $MONITORDB < $ITSDIR/slapd.conf > $CONF2
-$SLAPD -f $CONF2 -h $URI2 -d $LVL $TIMING > $LOG2 2>&1 &
+$SLAPD -f $CONF2 -h $URI2 -d $LVL > $LOG2 2>&1 &
 PROXYPID=$!
 if test $WAIT != 0 ; then
     echo PROXYPID $PROXYPID
@@ -167,7 +167,7 @@ case $RC in
 esac
 
 echo "Restarting slapd on TCP/IP port $PORT1..."
-$SLAPD -f $CONF1 -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
+$SLAPD -f $CONF1 -h $URI1 -d $LVL > $LOG1 2>&1 &
 SERVERPID=$!
 if test $WAIT != 0 ; then
     echo SERVERPID $SERVERPID

tests/data/regressions/its4336/its4336

@@ -46,7 +46,7 @@ if test $RC != 0 ; then
 fi
 
 echo "Starting slapd on TCP/IP port $PORT1..."
-$SLAPD -f $CONF1 -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
+$SLAPD -f $CONF1 -h $URI1 -d $LVL > $LOG1 2>&1 &
 SERVERPID=$!
 if test $WAIT != 0 ; then
     echo SERVERPID $SERVERPID
@@ -76,7 +76,7 @@ fi
 
 echo "Starting chain slapd on TCP/IP port $PORT2..."
 . $CONFFILTER $BACKEND $MONITORDB < $ITSDIR/slapd.conf > $CONF2
-$SLAPD -f $CONF2 -h $URI2 -d $LVL $TIMING > $LOG2 2>&1 &
+$SLAPD -f $CONF2 -h $URI2 -d $LVL > $LOG2 2>&1 &
 PROXYPID=$!
 if test $WAIT != 0 ; then
     echo PROXYPID $PROXYPID

tests/data/regressions/its4448/its4448

@@ -49,7 +49,7 @@ ITSCONF=$ITSDIR/slapd-meta.conf
 
 echo "Starting slapd on TCP/IP port $PORT1..."
 . $CONFFILTER $BACKEND $MONITORDB < $CONF > $CONF1
-$SLAPD -f $CONF1 -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
+$SLAPD -f $CONF1 -h $URI1 -d $LVL > $LOG1 2>&1 &
 PID=$!
 if test $WAIT != 0 ; then
     echo PID $PID
@@ -105,7 +105,7 @@ fi
 
 echo "Starting slapd on TCP/IP port $PORT2..."
 . $CONFFILTER $BACKEND $MONITORDB < $METACONF2 > $CONF2
-$SLAPD -f $CONF2 -h $URI2 -d $LVL $TIMING > $LOG2 2>&1 &
+$SLAPD -f $CONF2 -h $URI2 -d $LVL > $LOG2 2>&1 &
 PID=$!
 if test $WAIT != 0 ; then
     echo PID $PID
@@ -144,7 +144,7 @@ fi
 
 echo "Starting slapd on TCP/IP port $PORT3..."
 . $CONFFILTER $BACKEND $MONITORDB < $ITSCONF > $CONF3
-$SLAPD -f $CONF3 -h $URI3 -d $LVL $TIMING > $LOG3 2>&1 &
+$SLAPD -f $CONF3 -h $URI3 -d $LVL > $LOG3 2>&1 &
 PID=$!
 if test $WAIT != 0 ; then
     echo PID $PID

tests/data/regressions/its6794/its6794

@@ -33,7 +33,7 @@ if test $RC != 0 ; then
 fi
 
 echo "Starting slapd on TCP/IP port $PORT1..."
-$SLAPD -f $CONF1 -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
+$SLAPD -f $CONF1 -h $URI1 -d $LVL > $LOG1 2>&1 &
 PID=$!
 if test $WAIT != 0 ; then
     echo PID $PID

tests/data/regressions/its7573/its7573

@@ -34,7 +34,7 @@ echo "Starting slapd on TCP/IP port $PORT1... $PWD"
 . $CONFFILTER $BACKEND $MONITORDB < $DYNAMICCONF > $CONFLDIF
 $SLAPADD -F $CONFDIR -n 0 -l $CONFLDIF
 cd $TESTDIR
-$SLAPD -F ./slapd.d -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
+$SLAPD -F ./slapd.d -h $URI1 -d $LVL > $LOG1 2>&1 &
 PID=$!
 if test $WAIT != 0 ; then
     echo PID $PID

tests/data/regressions/its8427/its8427

@@ -139,7 +139,7 @@ olcOverlay: syncprov
 EOF
 
 echo "Starting provider..."
-$SLAPD -F ./slapd.d -h "$SURIP1 ldaps://127.0.0.2:$PORT1" -d $LVL $TIMING > $LOG1 2>&1 &
+$SLAPD -F ./slapd.d -h "$SURIP1 ldaps://127.0.0.2:$PORT1" -d $LVL > $LOG1 2>&1 &
 MASTERPID=$!
 if test $WAIT != 0 ; then
     echo MASTERPID $MASTERPID
@@ -181,7 +181,7 @@ olcSyncRepl: rid=001 provider=ldaps://127.0.0.2:$PORT1
 EOF
 
 echo "Starting consumer..."
-$SLAPD -F ./slapd.d -h $URI2 -d $LVL $TIMING > $LOG2 2>&1 &
+$SLAPD -F ./slapd.d -h $URI2 -d $LVL > $LOG2 2>&1 &
 SLAVEPID=$!
 if test $WAIT != 0 ; then
     echo SLAVEPID $SLAVEPID
@@ -252,7 +252,7 @@ sleep $SLEEP2
 
 echo "======================= RESTART =======================" >> $LOG1
 cd $TESTDIR/srv1
-$SLAPD -F slapd.d -h "$SURIP1 ldaps://127.0.0.2:$PORT1" -d $LVL $TIMING >> $LOG1 2>&1 &
+$SLAPD -F slapd.d -h "$SURIP1 ldaps://127.0.0.2:$PORT1" -d $LVL >> $LOG1 2>&1 &
 MASTERPID=$!
 if test $WAIT != 0 ; then
     echo MASTERPID $MASTERPID

tests/data/regressions/its8427/its8427-2

@@ -53,7 +53,7 @@ echo "database config" >> $CONF1
 echo "include $TESTDIR/configpw.conf" >> $CONF1
 
 echo "Starting slapd listening on $URIP1 and $SURIP2..."
-$SLAPD -f $CONF1 -h "$URIP1 $SURIP2" -d $LVL $TIMING > $LOG1 2>&1 &
+$SLAPD -f $CONF1 -h "$URIP1 $SURIP2" -d $LVL > $LOG1 2>&1 &
 SERVERPID=$!
 if test $WAIT != 0 ; then
     echo SERVERPID $SERVERPID
@@ -86,7 +86,7 @@ echo "include $TESTDIR/configpw.conf" >> $CONF2
 
 echo "Starting proxy slapd on TCP/IP port $PORT3..."
 . $CONFFILTER $BACKEND $MONITORDB < $ITSDIR/slapd.conf > $CONF2
-$SLAPD -f $CONF2 -h $URI3 -d $LVL $TIMING > $LOG2 2>&1 &
+$SLAPD -f $CONF2 -h $URI3 -d $LVL > $LOG2 2>&1 &
 PROXYPID=$!
 if test $WAIT != 0 ; then
     echo PROXYPID $PROXYPID

tests/data/regressions/its8444/its8444

@@ -72,7 +72,7 @@ while [ $n -le $MPR ]; do
 	CFDIR=${XDIR}$n/slapd.d
 
 	echo "Starting provider slapd on TCP/IP URI $MYURI"
-	$SLAPD -F $CFDIR -h $MYURI -d $LVL $TIMING > $MYLOG 2>&1 &
+	$SLAPD -F $CFDIR -h $MYURI -d $LVL > $MYLOG 2>&1 &
 
 	PID=$!
 	if test $WAIT != 0 ; then

tests/data/regressions/its8521/its8521

@@ -47,7 +47,7 @@ ITSDIR=$DATADIR/regressions/its$ITS
 echo "Starting provider slapd on TCP/IP port $PORT1..."
 . $CONFFILTER $BACKEND $MONITORDB < $ITSDIR/slapd-provider.ldif > $CONFLDIF
 $SLAPADD -F $CFPRO -n 0 -l $CONFLDIF
-$SLAPD -F $CFPRO -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
+$SLAPD -F $CFPRO -h $URI1 -d $LVL > $LOG1 2>&1 &
 PID=$!
 if test $WAIT != 0 ; then
 	echo PID $PID
@@ -78,7 +78,7 @@ fi
 echo "Starting consumer slapd on TCP/IP port $PORT2..."
 . $CONFFILTER $BACKEND $MONITORDB < $ITSDIR/slapd-consumer.ldif > $CONFLDIF
 $SLAPADD -F $CFCON -n 0 -l $CONFLDIF
-$SLAPD -F $CFCON -h $URI2 -d $LVL $TIMING > $LOG2 2>&1 &
+$SLAPD -F $CFCON -h $URI2 -d $LVL > $LOG2 2>&1 &
 SLAVEPID=$!
 if test $WAIT != 0 ; then
 	echo SLAVEPID $SLAVEPID

tests/data/regressions/its8616/its8616

@@ -40,7 +40,7 @@ ITSDIR=$DATADIR/regressions/its$ITS
 echo "Starting provider slapd on TCP/IP port $PORT1..."
 . $CONFFILTER $BACKEND $MONITORDB < $ITSDIR/slapd-provider.ldif > $CONFLDIF
 $SLAPADD -F $CFPRO -n 0 -l $CONFLDIF
-$SLAPD -F $CFPRO -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
+$SLAPD -F $CFPRO -h $URI1 -d $LVL > $LOG1 2>&1 &
 PID=$!
 if test $WAIT != 0 ; then
 	echo PID $PID

tests/data/regressions/its8663/its8663

@@ -40,7 +40,7 @@ ITSDIR=$DATADIR/regressions/its$ITS
 echo "Starting provider slapd on TCP/IP port $PORT1..."
 . $CONFFILTER $BACKEND $MONITORDB < $ITSDIR/slapd-provider.ldif > $CONFLDIF
 $SLAPADD -F $CFPRO -n 0 -l $CONFLDIF
-$SLAPD -F $CFPRO -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
+$SLAPD -F $CFPRO -h $URI1 -d $LVL > $LOG1 2>&1 &
 PID=$!
 if test $WAIT != 0 ; then
 	echo PID $PID

tests/data/regressions/its8752/its8752

@@ -69,7 +69,7 @@ KILLPIDS=
 
 echo "Starting slapd on TCP/IP port $PORT1..."
 . $CONFFILTER $BACKEND $MONITORDB < $ITSDIR/slapd.conf > $CONF1
-$SLAPD -f $CONF1 -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
+$SLAPD -f $CONF1 -h $URI1 -d $LVL > $LOG1 2>&1 &
 PID=$!
 if test $WAIT != 0 ; then
 	echo PID $PID
@@ -182,7 +182,7 @@ while [ $n -le $MPR ]; do
 	if [ -f $TESTDIR/slapd.conf ]; then
 		rm -f $TESTDIR/slapd.conf
 	fi
-	$SLAPD -f $MYCONF -h $MYURI  -d $LVL $TIMING >> $MYLOG 2>&1 &
+	$SLAPD -f $MYCONF -h $MYURI  -d $LVL >> $MYLOG 2>&1 &
 	PID=$!
 	if test $WAIT != 0 ; then
 		echo PID $PID
@@ -400,7 +400,7 @@ while [ $n -le $MPR ]; do
     if [ -f $TESTDIR/slapd.conf ]; then
         rm -f $TESTDIR/slapd.conf
     fi
-    $SLAPD -f $MYCONF -h $MYURI  -d $LVL $TIMING >> $MYLOG 2>&1 &
+    $SLAPD -f $MYCONF -h $MYURI  -d $LVL >> $MYLOG 2>&1 &
     PID=$!
     if test $WAIT != 0 ; then
         echo PID $PID

tests/data/regressions/its8800/its8800

@@ -70,7 +70,7 @@ while [ $n -le $MPR ]; do
 	CFDIR=${XDIR}$n/slapd.d
 
 	echo "Starting provider slapd on TCP/IP URI $MYURI"
-	$SLAPD -F $CFDIR -h $MYURI -d $LVL $TIMING > $MYLOG 2>&1 &
+	$SLAPD -F $CFDIR -h $MYURI -d $LVL > $MYLOG 2>&1 &
 
 	PID=$!
 	if test $WAIT != 0 ; then
@@ -146,7 +146,7 @@ echo "done"
 
 echo "Starting provider1 slapd on TCP/IP URI $URI1"
 CFDIR="$TESTDIR/srv1/slapd.d"
-$SLAPD -F $CFDIR -h $URI1 -d $LVL $TIMING >> $LOG1 2>&1 &
+$SLAPD -F $CFDIR -h $URI1 -d $LVL >> $LOG1 2>&1 &
 
 PID=$!
 if test $WAIT != 0 ; then

tests/data/regressions/its9282/its9282

@@ -67,7 +67,7 @@ while [ $n -le $MMR ]; do
 	CFDIR=${XDIR}$n/slapd.d
 
 	echo "Starting provider slapd on TCP/IP URI $MYURI"
-	$SLAPD -F $CFDIR -h $MYURI -d $LVL -d sync $TIMING > $MYLOG 2>&1 &
+	$SLAPD -F $CFDIR -h $MYURI -d $LVL -d sync > $MYLOG 2>&1 &
 
 	PID=$!
 	if test $WAIT != 0 ; then
@@ -181,7 +181,7 @@ $LDAPSEARCH -D $MANAGERDN -w $PASSWD -b "$BASEDN" -H $URI2 \
 
 echo "Starting provider1 slapd on TCP/IP URI $URI1"
 CFDIR="$TESTDIR/srv1/slapd.d"
-$SLAPD -F $CFDIR -h $URI1 -d $LVL $TIMING >> $LOG1 2>&1 &
+$SLAPD -F $CFDIR -h $URI1 -d $LVL >> $LOG1 2>&1 &
 
 PID=$!
 if test $WAIT != 0 ; then

tests/scripts/passwd-search

@@ -33,7 +33,7 @@ mkdir -p $TESTDIR
 
 echo "Starting slapd on TCP/IP port $PORT1..."
 . $CONFFILTER $BACKEND $MONITORDB < $PASSWDCONF > $CONF1
-$SLAPD -f $CONF1 -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
+$SLAPD -f $CONF1 -h $URI1 -d $LVL > $LOG1 2>&1 &
 PID=$!
 if test ${WAIT-0} != 0 ; then
     echo PID $PID

tests/scripts/relay

@@ -19,7 +19,7 @@ echo ""
 echo "Starting slapd on TCP/IP port $PORT1..."
 echo "======== Starting slapd with $RELAY backend ========" >> $LOG1
 . $CONFFILTER $BACKEND $MONITORDB < $RELAYCONF > $CONF1
-$SLAPD -f $CONF1 -h $URI1 -d $LVL $TIMING >> $LOG1 2>&1 &
+$SLAPD -f $CONF1 -h $URI1 -d $LVL >> $LOG1 2>&1 &
 PID=$!
 if test $WAIT != 0 ; then
     echo PID $PID

tests/scripts/sql-test000-read

@@ -30,7 +30,7 @@ mkdir -p $TESTDIR
 
 echo "Starting slapd on TCP/IP port $PORT1..."
 . $CONFFILTER $BACKEND $MONITORDB < $SQLCONF > $CONF1
-$SLAPD -f $CONF1 -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
+$SLAPD -f $CONF1 -h $URI1 -d $LVL > $LOG1 2>&1 &
 PID=$!
 if test $WAIT != 0 ; then
     echo PID $PID

tests/scripts/sql-test001-concurrency

@@ -41,7 +41,7 @@ mkdir -p $TESTDIR $SQLDATADIR
 
 echo "Starting slapd on TCP/IP port $PORT1..."
 . $CONFFILTER $BACKEND $MONITORDB < $SQLCONF > $CONF1
-$SLAPD -f $CONF1 -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
+$SLAPD -f $CONF1 -h $URI1 -d $LVL > $LOG1 2>&1 &
 PID=$!
 if test $WAIT != 0 ; then
     echo PID $PID

tests/scripts/sql-test900-write

@@ -35,7 +35,7 @@ mkdir -p $TESTDIR
 
 echo "Starting slapd on TCP/IP port $PORT1..."
 . $CONFFILTER $BACKEND $MONITORDB < $SQLCONF > $CONF1
-$SLAPD -f $CONF1 -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
+$SLAPD -f $CONF1 -h $URI1 -d $LVL > $LOG1 2>&1 &
 PID=$!
 if test $WAIT != 0 ; then
     echo PID $PID