Skip to content
Snippets Groups Projects

Compare revisions

Changes are shown as if the source revision was being merged into the target revision. Learn more about comparing revisions.

Source

Select target project
No results found

Target

Select target project
  • openldap/openldap
  • hyc/openldap
  • ryan/openldap
  • iboukris/openldap
  • ondra/openldap
  • sshanks-kx/openldap
  • blaggacao/openldap
  • pbrezina/openldap
  • quanah/openldap
  • dragos_h/openldap
  • lorenz/openldap
  • tsaarni/openldap
  • fei.ding/openldap
  • orent/openldap
  • arrowplum/openldap
  • barchiesi/openldap
  • jotik/openldap
  • hamano/openldap
  • ingovoss/openldap
  • henson/openldap
  • jlrine2/openldap
  • howeverAT/openldap
  • nivanova/openldap
  • orbea/openldap
  • rdubner/openldap
  • smckinney/openldap
  • jklowden/openldap
  • dpa-openldap/openldap
  • rouzier/openldap
  • orgads/openldap
  • ffontaine/openldap
  • jiaqingz/openldap
  • dcoutadeur/openldap
  • begeragus/openldap
  • pubellit/openldap
  • glandium/openldap
  • facboy/openldap
  • thesamesam/openldap
  • Johan/openldap
  • fkooman/openldap
  • gburd/openldap
  • h-homma/openldap
  • sgallagher/openldap
  • ahmed_zaki/openldap
  • gnoe/openldap
  • mid/openldap
  • clan/openldap
47 results
Show changes
Commits on Source (510)
410 additional commits have been omitted to prevent performance issues.
Hide whitespace changes
Inline Side-by-side
Showing
with 4434 additions and 756 deletions
ANNOUNCEMENT
View file @ 6c343311
A N N O U N C E M E N T
LDAP 3.3
The University of Michigan is pleased to announce release 3.3 of
UM-LDAP, an implementation of the Lightweight Directory Access
Protocol. LDAP is a draft Internet standard directory service
protocol that runs over TCP/IP. It can be used to provide a
stand-alone directory service, or to provide lightweight access to
the X.500 directory. LDAP is defined by RFC 1777 and RFC 1778.
This release includes the following components:
- slapd - a stand-alone LDAP directory server
- slurpd - a stand-alone LDAP replication server
- ldapd - an LDAP-to-X.500 gateway server
- centipede - an LDAP centroid generation and maintenance program
- libldap - an LDAP client library
- liblber - a lightweight BER/DER encoding/decoding library
- ldif tools - data conversion tools for use with slapd
- in.xfingerd - a finger-to-LDAP gateway server
- go500 - a gopher-to-LDAP gateway server for searching
- go500gw - a gopher-to-LDAP gateway server for searching and browsing
- rcpt500 - an email-to-LDAP query responder
- mail500 - an LDAP-capable mailer
- fax500 - an LDAP-capable mailer that supports remote printing
- LDAP tools - A collection of shell-based LDAP utility programs
A N N O U N C E M E N T -- OpenLDAP 2.0
The OpenLDAP Project is pleased to announce the availability
of OpenLDAP 2.0, a suite of the Lightweight Directory Access
Protocol servers, clients, utilities, and development tools.
This release contains the following major enhancements:
* LDAPv3 support
+ RFC 2251-2256
+ Language Tags (RFC 2596)
+ SASL (RFC2829)
+ TLS (RFC2830) and SSL (ldaps://)
+ named references
+ DNS SRV location
* IPv6 support
* LDAP over IPC support
* Updated C API
* LDIFv1 (RFC2849)
* Enhanced Standalone LDAP Server:
+ Updated Access Control System
+ Thread Pooling
+ DNS SRV referral backend (experimental)
+ LDAP backend (experimental)
+ SQL backend (experimental)
+ Better tools
This release includes the following major components:
* slapd - a stand-alone LDAP directory server
* slurpd - a stand-alone LDAP replication server
* -lldap - a LDAP client library
* -llber - a lightweight BER/DER encoding/decoding library
* LDIF tools - data conversion tools for use with slapd
* LDAP gateways - finger, gopher, email to LDAP gateways
* LDAP mailer - sendmail-compatible mail delivery agents
* LDAP tools - A collection of command line LDAP utility programs
In addition, there are some contributed components:
- web500 - an HTTP-to-LDAP gateway
- whois++d - a WHOIS++-to-LDAP gateway
- saucer - a simple command-line oriented client program
* ldapTCL - the NeoSoft TCL LDAP SDK
* gtk-tool - a demonstration ldap interface written gtk
* php3-tool - a demonstration ldap interface written php3
* saucer - a simple command-line oriented client program
* whois++d - a WHOIS++-to-LDAP gateway
CHANGES
This release contains a number of major code changes. It
might be a bit rough around the edges. Use with appropriate
caution.
Changes since release 3.2 of LDAP include
- slurpd has been rewritten as a single process threaded daemon
- ldaptools (ldapsearch, etc) now support the LDIF format
- support for LDAP URLs added to libldap
- improved support for LDAP referrals in libldap
- preliminary test scripts included
- support for additional platforms
- various bug fixes and build fixes
ACKNOWLEDGEMENTS
OpenLDAP is developed by a team of volunteers whose use
the Internet to coordinate their activities. The project is
managed by the OpenLDAP Foundation.
OpenLDAP LDAP implementation is derived from University of
Michigan LDAP release 3.3.
See the CHANGES file in the distribution for more details.
AVAILABILITY
This software is freely available to anyone for any lawful purpose,
subject to the U-M copyright notice and disclaimer. The software is
available for anonymous ftp from the following location:
This software is available under the OpenLDAP Public License,
an unrestrictive, "free," OSS-approved open source license.
For download information is available at:
http://www.OpenLDAP.org/software/download/
ftp://terminator.rs.itd.umich.edu/ldap/ldap-3.3.tar.Z
SUPPORT
The software is provided as is without any express or implied
warranty, but there is a bug reporting mail address which is
responded to on a best-effort basis:
OpenLDAP software is user supported:
http://www.openldap.org/support/
The OpenLDAP Administrator's Guide, which includes quick
start instructions, is available at:
http://www.openldap.org/doc/admin/
The project maintains a FAQ which you may find useful:
http://www.openldap.org/faq/
ldap-support@umich.edu
In addition, there are also a number of discussion lists
related OpenLDAP. A list of mailing lists is available at:
In addition, there is a discussion list for issues relating to this
implementation of ldap:
http://www.OpenLDAP.org/lists/
ldap@umich.edu -- discussion list
ldap-request@umich.edu -- to join the list
To report bugs, please use project's Issue Tracking System:
Comments or questions about the LDAP protocol in general should be
sent to the IETF ASID discussion group:
http://www.openldap.org/its/
ietf-asid@umich.edu -- discussion list
ietf-asid-request@umich.edu -- to join the list
The OpenLDAP home page containing lots of interesting information
and online documentation is available at this URL:
An LDAP home page containing lots of interesting information and
online documentation is available at this URL:
http://www.OpenLDAP.org/
http://www.umich.edu/~rsug/ldap/
SUPPORTED PLATFORMS
This release has been ported to many UNIX platforms, including
SunOS 4.1.x, Solaris 2.x, Ultrix 4.3, HP-UX 9.05, AIX 3.2.5,
SCO, FreeBSD, NetBSD, LINUX, IRIX, Digital Unix (OSF/1), and
NeXTSTEP 3.2. This release has also been ported to VMS.
This release has been ported to many UNIX (and UNIX-like) platforms
including FreeBSD, Linux, NetBSD, OpenBSD and most commercial
UNIX systems. The release has also been ported (in part or in whole)
to other platforms including BeOS, MacOS, and MS Windows NT/2000.
The client libraries and some clients have also been ported to
MacOS 7.x, MSDOS (some TCP stacks), and MS Windows 3.1/95/NT.
CHANGES
View file @ 6c343311
Changes since 3.3b1
Various Make-template files - update by doing 'make depend'
include/disptmpl.h - add LDAP_DISP_OPT_HTMLBODYONLY option
libraries/liblber/io.c - under MacOS, limit tcpwrite() calls to a
maximum of 64K bytes; ber_flush() int/long fix
libraries/libldap/friendly.c - don't use errno on MacOS or DOS
libraries/libldap/regex.c - fix re_exec() to that ".*" matches ""
libraries/libldap/result.c - eliminate memory leak in wait4msg()
libraries/libldap/request.c - eliminate double-free impurity
libraries/libldap/tmplout.c - add LDAP_DISP_OPT_HTMLBODYONLY option
libraries/libldap/ufn.c - purify: avoid bad frees; plug memory leaks
libraries/libldif/line64.c - str_parse_line() now 0-terminates base64 vals.
libraries/macintosh/* - tcpwrite()/OpenTransport bug fixes
- better error checking for MacTCP driver opens
- don't use old routine names any more
libraries/msdos/winsock/* - various bugs fixes & improvements
servers/slapd/modify.c - fix bug causing unnormalized attr names
servers/slapd/monitor.c - return new "version" attribute
servers/slapd/regex.c - fix re_exec() to that ".*" matches ""
servers/slapd/tools/ldbmcat.c - make -n option work (don't open file "-n" )
servers/slapd/tools/ldif2id2entry.c - include ids in stored entries
servers/slapd/schema.c - log some information useful in tracking
down schema-check problems
servers/slapd/dn.c - dn_upcase() was not returning anything (doh!)
servers/slapd/backend.c - pass unbind request to all backends
servers/slapd/unbind.c - pass unbind request to all backends
servers/slapd/Version.c - remove leading spaces from Versionstr[]
servers/slapd/back-ldbm/unbind.c - make arguments consistent
servers/slapd/back-ldbm/bind.c - fix bug which allowed anyone to bind as
anyone else using kerberos, if there was
at least one krbName in an entry
servers/slurpd/replog.c - do all replog copying with buffered i/o
servers/slurpd/fm.c - fix inconsistency in arguments
servers/slurpd/main.c - fix inconsistency in arguments
clients/tools/ldapdelete.c - add -K flag - only does LDAP_AUTH_KRBV41
clients/tools/ldapmodify.c - add -K flag - only does LDAP_AUTH_KRBV41
clients/tools/ldapmodrdn.c - add -K flag - only does LDAP_AUTH_KRBV41
clients/tools/ldapsearch.c - add -K flag - only does LDAP_AUTH_KRBV41
doc/man/man1/ldapdelete.1 - add -K flag - only does LDAP_AUTH_KRBV41
doc/man/man1/ldapmodify.1 - add -K flag - only does LDAP_AUTH_KRBV41
doc/man/man1/ldapmodrdn.1 - add -K flag - only does LDAP_AUTH_KRBV41
doc/man/man1/ldapsearch.1 - add -K flag - only does LDAP_AUTH_KRBV41
doc/man/man3/ldap_entry2text.3 - document LDAP_DISP_OPT_HTMLBODYONLY option
doc/man/man8/slapd.8 - add BUGS section and document modrdn bug
----------------------------------------------------------------------------
Changes since 3.2
Makefile - added support for IRIX (SGI)
- make depend improvements
tests/ - all new test scripts -- make test
include/lber.h - use short include file names #ifdef WINSOCK
include/ldap.h - change LDAPCache struct definition to reduce
cache overhead
- use short include file names #ifdef WINSOCK
- LDAP URL support
- add lr_conn to LDAPRequest (needed by abandon)
- add LDAP_OPT_RESTART for select() restart
- revised Debug() macro #ifdef WINSOCK
include/ldbm.h - under NDBM, use O_RDWR instead of O_CREAT
- in LDBM_WRCREAT and LDBM_NEWDB
include/proto-lber.h - changes for WIN32
include/proto-ldap.h - changes for WIN32
- added LDAP URL routines
include/disptmpl.h - changes for WIN32
include/ldif.h - includes for new libldif library
include/srchpref.h - changes for WIN32
libraries/liblber/decode.c - vararg changes for WIN32
libraries/liblber/encode.c - vararg changes for WIN32
libraries/libldap/abandon.c - make ldap_abandon() work with referrals
libraries/libldap/bind.c - added new ldap_set_rebind_proc() routine
libraries/libldap/cache.c - reduce cache overhead
- fix small cache size infinite loop bug
- clarify debugging messages
libraries/libldap/charset.c - new routines: ldap_translate_from_t61,
ldap_translate_to_t61,
ldap_enable_translation
libraries/libldap/cldap.c - changes to support referral re-bind w/auth
libraries/libldap/getfilter.c - ldap_build_filter: don't use NULL value
libraries/libldap/kbind.c - changes to support referral re-bind w/auth
libraries/libldap/ldap-int.h - changes to support referral re-bind w/auth
- rename do_select() to do_ldap_select()
libraries/libldap/open.c - changes to support referral re-bind w/auth
- ld_options = LDAP_OPT_REFERRALS by default
libraries/libldap/os-ip.c - include <sys/time.h> to fix HP/UX gcc builds
- rename do_select() to do_ldap_select()
libraries/libldap/result.c - wait4msg debugging now shows timeout values
- changes to support referral re-bind w/auth
- rename do_select() to do_ldap_select()
- buf fix in ldap_msgdelete() -- update prev
- support LDAP_OPT_RESTART option
libraries/libldap/request.c - changes to support referral re-bind w/auth
- initialize new lr_conn field (for abandon)
libraries/libldap/test.c - changes to support referral re-bind w/auth
libraries/libldap/tmplout.c - searchact uses "-dnt" and "-dnb", not "-dn"
libraries/libldap/url.c - new routines: ldap_is_ldap_url,
ldap_parse_url, ldap_url_search
ldap_url_search_s, ldap_url_search_st
libraries/libldif/ - new library that contains line64 routines
clients/tools/ldapmodify.c - preferred input format is now slapd.replog
clients/tools/ldapsearch.c - added -L option (output in LDIF format)
- don't print initial blank line when -f used
- support "-f -" for reading filters from stdin
clients/ud/*.c - various bug fixes & auth. streamlining
doc/man/man3/ldap.3 - add several new routines
doc/man/man3/ldap_bind.3/.links - add new ldap_set_rebind_proc() routine
doc/man/man3/ldap_charset.3/.links - add new routines
doc/man/man3/ldap_disptmpl.3 - added missing *'s in ldap_init... arg. lists
doc/man/man3/ldap_result.3 - add details r.e. timeout parameter
doc/man/man3/ldap_open.3 - document LDAP_OPT_REFERRALS default to on
doc/man/man3/ldap_url.3/.links - document new LDAP URL routines
Make-common.dist and .um - add LDBMINCLUDE variable
- use ISODEPACKAGE and ICRELEASE in place of
ICR1 and XTISODE defines
- remove LDAP_DNS stuff
build/Make-append - add LDBMINCLUDE variable
- add NO_SETPROCTITLE to SERVERDEFS
- use ISODEPACKAGE and ICRELEASE in place of
ICR1 and XTISODE defines
build/mkdep - use compiler passed in, not always cc
- remove system dependencies when gcc is used
build/platforms/attsvr4-cc/ - AT&T SVR4 support
build/platforms/irix-cc/ - SGI IRIX support
build/platforms/irix-gcc/ - SGI IRIX support
servers/ldapd/common.h - add missing extern function declarations
servers/ldapd/association.c - use ISODEPACKAGE test instead of ICR1, etc.
servers/ldapd/certificate.c - add missing extern declaration
servers/ldapd/error.c - use ISODEPACKAGE test instead of ICR1, etc.
servers/ldapd/kerberos.c - use ISODEPACKAGE test instead of ICR1, etc.
servers/ldapd/request.c - use ISODEPACKAGE test instead of ICR1, etc.
servers/ldapd/main.c - set proctitle to calling host (bug fix)
- CLDAP: don't timeout/exit prematurely
servers/ldapd/proctitle.c - don't compile file if NO_SETPROCTITLE is on
servers/ldapd/Make-template - don't try to make depend if don't have isode
servers/ldap - bug fixes, support ICR3
servers/slapd/tools/ldif.c - use correct pointer when calling realloc
servers/slapd/tools/edb2ldif.c - properly #ifdef code to handle potential
lack of file_attr_dir and turbo disk stuff
- add RDN attribute values to entries
- don't pre-pend './' to EDB files on cmd. line
servers/slapd/tools/ldapsyntax.c- use static buffer to speed things up
servers/slapd/tools/Make-template - don't try to make depend some tools
- if we don't have isode
servers/slapd - fix acl handling
servers/slapd - fix race condition setting o_dn
servers/slapd - bug fixes
servers/slurpd - complete re-write
tests/ - new - test scripts to verify basic
functionality of libraries, slapd, slurpd
----------------------------------------------------------------------------
Changes since 3.2b3
slapd admin guide - document ldbmtest changes
- clarify quick-start instructions
include/ldapconfig.h.dist - move likely-to-change things to top
Make-common.dist - add phonetic algorithm config lines
build/Make-append - add def for phonetic algorithm config lines
libraries/libldbm/ldbm.c - fix bug with gdbm cache size handling
libraries/liblber/encode.c - cap lengths at 32-bits for Alpha compatibility
libraries/libldap/disptmpl.c - recognize both "addact" and "adddnact"
libraries/libldap/getdn.c - handle \ escapes in DNs better
clients/tools/ldapsearch.c - added -S option to sort results
- print results as they are received (if no -S)
servers/slapd/* - added function prototypes
servers/slapd/phonetic.c - make phonetic alg settable in Make-common
servers/slapd/tools/ldbmtest.c - fix bugs, use dbcache routines (like slapd)
- add 'b' and 'B' commands
servers/slapd/tools/edb2ldif.c - include quipu/config.h & quipu/entry.h
- this fixes TURBO_DISK problems
servers/ldapd/* - misc. fixes for VMS and OSF/1
- added function prototypes
----------------------------------------------------------------------------
Changes since 3.2b2
servers/slapd/* - lots of changes/fixes/improvements
servers/slapd/tools/* - add ldif program
- add centipede program
- numerous fixes/improvements
clients/tools/ldapmodify.c - add -b option (read binary vals from a file)
- add trailing \ feature for iattr, etc.
clients/tools/ldapsearch.c - add -z sizelimit and -l timelimit options
- add -B (allow non-ascii values_ option
- change /tmp template used with -t
include/lber.h - add LBER_MAX_INCOMING_SIZE option
libraries/liblber/io.c - support LBER_MAX_INCOMING_SIZE option
- new ber_init() and ber_reset() routines
libraries/libldap/* - various improvements to LDAP_REFERRALS code
- minor changes for Mac re-port
libraries/libldap/disptmpl.c - "addact" is now "adddnact"
libraries/libldap/cache.c - we now cache compare results that have error
of LDAP_NO_SUCH_ATTRIBUTE
libraries/libldap/open.c - support :port on ldap_open() hosts
libraries/libldap/charset.c - new T.61 to ISO-8859 conversion support
- thanks to enrique.silvestre@uv.es
libraries/libldap/kbind.c - a few changes for MS Windows
libraries/msdos/winsock/* - a few changes for Kerberos support
servers/ldapd/modify.c - added support for JPEG non-file attrs.
- added support for octetstring attrs.
servers/ldapd/syntax.c - DN syntax fixes (OID. and replace {ASN} w/#)
- don't escape '$' in DeliveryMethod attrs.
- added support for JPEG non-file attrs.
- added support for octetstring attrs.
----------------------------------------------------------------------------
Changes since 3.2b1
servers/slapd/ - add better database concurrency
- remove multiple dn support
- add stats logging
- fix syslogging
- add include config file option
- add dbcachesize option
- add abandon
- add lastmod/creator attrs
- add monitoring capability
- normalize dns properly
- base 64 value encoding support
- add schema checking
- fix various bugs
- add srvtab config option
servers/slapd/tools - whole new set of db creation/conversion tools
clients/finger/main.c - added -c option & use of FINGER_RDNCOUNT
clients/gopher/go500.c - added -c option & use of GO500_RDNCOUNT
clients/gopher/go500gw.c - added -c option & use of GO500GW_RDNCOUNT
- removed non-functional -s option
clients/rcpt500/main.c - added -c option & use of RCPT500_RDNCOUNT
clients/rcpt500/query.c - use rdncount instead of hard-coded 2
include/ldapconfig.h.edit - added _RDNCOUNT #defines
libraries/libldap/tmplout.c - made rdncount of 0 show all DN components
libraries/libldap/getdn.c - added ldap_is_dns_dn() routine
libraries/libldap/* - many #ifndef NO_REFERRALS changes
- new ldap_init() routine
----------------------------------------------------------------------------
Changes since 3.1 final
General/various files - incorporated changes for Borland C 3.1
Makefile - added support for NeXTSTEP
libraries/liblber/io.c - add ability to save ldap session to a file
include/lber.h - add ability to save ldap session to a file
build/platforms/nextstep-cc/Make-platform
- added -all_load option for ld
build/platforms/sunos5-cc/Make-platform
- define SYSEXITSPATH as for sunos5-gcc
build/uname.sh - new replacement uname for NeXTSTEP, etc.
clients/finger/main.c - don't use fprintf for entry2text
clients/gopher/go500.c - use GO500_HOSTNAME (bug fix)
- don't use fprintf for entry2text
clients/gopher/go500gw.c - use GO500GW_HOSTNAME (bug fix)
- don't use fprintf for entry2text
clients/mail500/main.c - improved error logging
- fixed "errors-to is a group" bug
- don't look in people space for groups
- don't bounce loop messages back to sender
- misc. fixes
clients/tools/ldapdelete.c - add -c option to continue after errors occur
clients/tools/ldapmodify.c - add -c option to continue after errors occur
clients/tools/ldapmodrdn.c - add -c option to continue after errors occur
clients/tools/ldapsearch.c - added -t option to write values to tmp files
- added -A option for "attributes only"
clients/ud/print.c - make sure ldap_count_values() returns > 0
- before trying to use returned values
doc/man/man1/ldapdelete.1 - updated to mention new -c option
doc/man/man1/ldapmodify.1 - updated to mention new -c option
doc/man/man1/ldapmodrdn.1 - updated to mention new -c option
doc/man/man1/ldapsearch.1 - updated to mention new -A & -t options
doc/man/man3/ldap_friendly.3 - fixed typo in ldap_free_friendlymap()
doc/man/man5/ldapfilter.conf.5 - add missing part of example config file
include/disptmpl.h - appended 'L' to long #defined contants
- added entry2html family of routines
include/lber.h - added sb_options to allow copy to file
- added ber_wptr to re-start partial writes
include/ldap.h - added debug levels for sldapd
- added LDAP_SYSLOG to send debug using syslog
include/ldapconfig.h.edit - added GO500GW_HOSTNAME
include/ldapconfig.h.dist - added GO500GW_HOSTNAME
include/portable.h - select() macro fix for HP/UX /bin/cc
include/proto-lber.h - Borland C fixes
- added ber_bvdup() prototype
include/sysexits-compat.h - new file, in case we ever need it
libraries/libavl/* - new library; used in sldapd
libraries/liblber/decode.c - new 'o' feature for ber_scanf()
- new ber_bvdup() routine
- Borland C fixes
libraries/liblber/encode.c - Borland C fixes
libraries/liblber/io.c - ensure that write size <= 64K under VMS
- use ber_wptr to restart partial writes
- added LBER_TO_FILE/FILE_ONLY option support
libraries/libldap/abandon.c - use correct message id in abandon requests
libraries/libldap/cache.c - use time() in a more portable manner
libraries/libldap/cldap.c - retry correct number of times (off by one)
libraries/libldap/error.c - define empty ldap_perror if NO_USERINTERFACE
libraries/libldap/getdn.c - ldap_dn2ufn() now returns dn if no '='
- ldap_explode_dn handles DNs without '='
libraries/libldap/open.c - "host" can now be a space-separated list
libraries/libldap/sort.c - make function declarations more portable
libraries/libldap/srchpref.c - fixed memory leak in options parsing
libraries/libldap/test.c - added -t & -T options for ber output to file
- added 'E' command to explode a DN
libraries/libldap/tmplout.c - added entry2html()
- added entry2html_search()
- added entry2vals()
- remove extraneous ber_free when not using tmpl
- fix non-ASCII core dump bugs
libraries/libldap/ldapfriendly - added EE & RU
libraries/libldap/ldapfilter.conf
- remove '\' inside [] in reg exprs.
- add web500gw to filter tags
- added xax500-auth section
libraries/libldap/ldapsearchprefs.conf
- changed xax500 tags
libraries/libldap/ldaptemplates.conf
- added co to Country template
- add missing types & options to comments
- add "Last Modified" attrs. to all templates
- make "Last Modified" attrs. read-only
libraries/libldbm/* - new library; used in sldapd
libraries/liblthread/* - new library; used in sldapd
libraries/msdos/README.WSA - updated to include Borland C instructions
libraries/vms/README.VMS - fixed pathname typo
servers/ldapd/add.c - make BER tags unsigned long everywhere
servers/ldapd/certificate.c - make parsing consistent with printing code
servers/ldapd/main.c - moved openlog() after detach() call
servers/ldapd/modify.c - correct tag usage in ber_first/next loop
- output all debugging to stderr
- pass and use Sockbuf * in modify_result() call
servers/ldapd/result.c - change to always use DER encoding
servers/ldapd/search.c - change to always use DER encoding
servers/ldapd/syntax.c - add support for telexNumber
servers/sldapd - all new "standalone LDAP server"
----------------------------------------------------------------------------
Changes since 3.1b8
Make-common - added note r.e. -DNO_USERINTERFACE
servers/ldapd/association.c - don't include filio.h under AIX
build/platforms/aix-cc and -gcc - add _BSD to defines
include/portable.h - define OPENLOG_OPTIONS
clients/*/*.c - use OPENLOG_OPTIONS
servers/ldapd/main.c - use OPENLOG_OPTIONS
servers/ldapd/syntax.c - add iattr support (from craig watkins)
----------------------------------------------------------------------------
Changes since 3.1b7
Many System V portability fixes....
A few fixes for VMS....
Makefile - support Linux & NetBSD
Make-common - add support for NEXOR version of isode
- add ISODEBASELIBS
include/Make-template - make ldapconfig.h depend on Makefile
include/ldapconfig.h.edit - add RCPT500_LISTLIMIT, RCPT500_UFN
- add GO500_TIMEOUT, GO500_UFN
- add FINGER_UFN, FINGER_TIMEOUT,
- add GO500GW_UFN
- change *_DEREF to be LDAP_DEREF_FINDING
include/regex.h - use NEED_BSDREGEX
include/portable.h - SYSV changes & general re-vamping
include/disptmpl.h - fix typo in ldap_name2template() prototype
- add LDAP_SYN_RFC822ADDR
libraries/liblber/io.c - make ber_alloc actually use BER
libraries/libldap/cldap.c - preserve old log DN if NULL is passed
libraries/libldap/regex.c - use NEED_BSDREGEX
libraries/libldap/disptmpl.c - add support for LDAP_SYN_RFC822ADDR
libraries/libldap/tmplout.c - add support for LDAP_SYN_RFC822ADDR
libraries/libldap/getfilter.c - always #include "regex.h"
servers/ldapd/main.c - don't check openlog return code
servers/ldapd/request.c - only do syslog if dosyslog is set
servers/ldapd/syntax.c - add support for user certificates (from ER)
servers/ldapd/certificate.c - add support for user certificates (new file)
clients/finger/main.c - add -t disptmplfile option
- add -p port option
- add ufn support
clients/gopher/go500.c - add -t disptmplfile option
- add ufn support
clients/gopher/go500gw.c - add -t disptmplfile option
- add ufn support
clients/mail500/main.c - add -t disptmplfile option
- add support for mail to -owner
clients/rcpt500/main.c,query.c - add support for RCPT500_LISTLIMIT
- support -p ldapport option
- add ufn support
clients/tools/ldapsearch.c - recognize -w option properly
clients/tools/ldapdelete.c - recognize -k option properly
clients/tools/ldapmodrdn.c - new program
clients/ud/edit.c - use execlp() instead of execle()
clients/ud/main.c - include sys/ioctl.h under NetBSD
clients/ud/print.c - updated time2text() from libldap/tmplout.c
contrib/saucer - new contributed client from Eric Rosenquist
build/platforms - added netbsd-cc & netbsd-gcc
- updated sunos5-cc and sunos5-gcc
- added missing CC=gcc in hpux-gcc
- added vms
build/Make-append - change ISODELIBS
doc/man/man8/rcpt500.8 - new manual page
doc/man/man3/ldap.3 - add (3) to routine names in INDEX section
doc/man/man3/ldap_search.3 - remove reference to ldap_parse(3)
doc/man/man3/ldap_modrdn.3 - new manual page
doc/man/man3/ldap_modrdn.3.links- new links file
doc/man/man3/ldap_disptmpl.3 - re-word ldap_octemplate description
- document LDAP_SYN_RFC822ADDR
doc/man/man5/ldap_searchprefs.5 - fix formatting
doc/man/man5/ldaptemplatesconf.5- document "mail" syntax type
doc/man/* - use ETCDIR everywhere (was %ETCDIR%)
-------
ldap-3.1b7 CHANGES file - summary of major changes to each component
since the last release
source tree - completely reorganized for your convenience
- makes full use of ansi-style prototypes
- supports non-ansi compilers through unproto utility
configuration - all client configuration has been moved to ldapconfig.h.edit
(no need to edit multiple source code files)
build procedure - completely revamped for your convenience
- automaticly figures out your platform/compiler
- supports multiple objects from a single source tree
liblbdap - added support for display templates
- added support for search preferences
- added ldap_sort routines for sorting entries
- rearranged some routines/source files to allow
better incremental linking to reduce code bloat
- added support for CLDAP
liblber - added O option to ber_scanf: allocate octet string w/length
- big tags (greater than 31) now supported
- distinguished encoding rules supported (runtime choice
between ber and der)
in.xfingerd - now uses display template routines
- now uses ldap sorting routines
- editable configuration info moved to ldapconfig.h.edit
go500 - now uses display template routines
- now uses ldap sorting routines
- editable configuration info moved to ldapconfig.h.edit
go500gw - now uses display template routines
- now uses ldap sorting routines
- editable configuration info moved to ldapconfig.h.edit
rcpt500 - now uses display template routines
- now uses ldap sorting routines
- editable configuration info moved to ldapconfig.h.edit
mail500 - addition of a new "vacation" feature
- editable configuration info moved to ldapconfig.h.edit
ldap tools - new addition of some shell-based tools
whois++ g/w - moved to contrib/ directory
web500 - new addition, in contrib/ directory
ldapd - lots of bug fixes
- bring CLDAP code in line with latest Internet Draft
documentation - library man pages have been completely re-done, split
into separate manuals, with new pages for each set of
routines.
- new man pages for most client programs (more on the way)
windows ldap - support for Win32 (unfinished?)
- added VERSIONINFO resource to dll
- check for > 64K response packet and don't crash
macintosh ldap - support Apple's new Universal Header files
OpenLDAP 2.0 Change Log
OpenLDAP 2.0.14 Release
Fixed slurpd billionth second bug (ITS#1323)
OpenLDAP 2.0.13 Release
Fixed slapd substring filter_free bug
Fixed slapd suffix check bug
Fixed ldapdelete -c handling (ITS#1071)
Fixed ldapsearch -S handling (ITS#1180)
Fixed ldbm BerkeleyDB 3.0 support (ITS#1306)
Fixed ldbm dbhandle cache bug (ITS#1164)
Fixed shell fgets handling
Fixed -lldap TLS ldap.conf handling
Added -lldap improved TLS certificate checking
Added slapd access to dn.base="" support
OpenLDAP 2.0.12 Release
Fixed slapd acl default clause bug (ITS#1187)
Fixed slapd modlist2mods error text bug
Fixed slapd numericString bugs (ITS#1182,1254)
Fixed slapd empty rootdn bug (ITS#1172)
Fixed slapd passwd modify replication (ITS#1237)
Fixed slapd textbuf bugs (ITS#1275)
Fixed ldapmodrdn SASL auth bug (ITS#1179)
Fixed slapadd already exists bug (ITS#1191)
Fixed slapadd empty dn bug
Added slapd modrdn children check (ITS#1053,1192)
Added slapd sb_max_incoming_auth support (ITS#1181)
Added slapd crypt salt format support (ITS#1202)
Added slapd subtree replication support
Added slurpd include support (ITS#121)
Added -lldap critical client control checks
Added ldbm sync daemon support
Added ldbm per-backend db_env support
Added ldbm BerkeleyDB 3.3 support (ITS#1272)
Updated slapd getaddrinfo use
Updated slapd schema check handling
Updated slapd filter checks
Updated slapd single-value checks
Updated ldbm to use BerkeleyDB's CDB (ITS#1176)
Updated ldbm error handling
Updated ldaptcl API (contrib)
Updated -lldap SASL/TLS referral handling
Updated -lldap pthread code
Removed -lldap UFN search support
Build environment
Removed extraneous files
Fixed BerkeleyDB db1 detection (ITS#1294)
OpenLDAP 2.0.11 Release
Fixed attribute parse bug (ITS#1159)
OpenLDAP 2.0.10 Release
Build Environment
Fixed TLS-less build (ITS#1156)
OpenLDAP 2.0.9 Release
Add slapd obsolete schema check
Add slapd collective schema check
Fix slapd printableString syntax bug
Fix ldbm bdb3 set_cachesize bug
Build Environment
Add nisMailAlias (ITS#876)
Fix inet_ntop configure test (ITS#1146)
Fix thr_nt.c syntax bug
OpenLDAP 2.0.8 Release
Fixed slapd empty OID value bug (ITS#882)
Fixed slapd waitpid() bug (ITS#900)
Fixed slapd gai_strerror() bug (ITS#895)
Fixed slapd unrecognized objectClass bug
Fixed slapd schema parse bug (ITS#1114)
Fixed slapd labeledURI bug (ITS#1040)
Fixed slapd dnaddr bug (ITS#1061)
Fixed slap tools sasl-secprops bug (ITS#1128)
Fixed back-ldap protocol versioning bug
Fixed back-ldap str2ad bug (ITS#919)
Fixed back-passwd nbase bug (ITS#941)
Fixed back-shell unbind response bug
Fixed back-ldbm oldSuperior bug (ITS#951)
Fixed back-ldbm modify password DN bug (ITS#1060)
Fixed -lldap SASL GSSAPI interop bug (ITS#884)
Fixed -lldap TLS/SASL crash bugs (ITS#889)
Fixed -llber exception bugs
Added slapd RANDFILE option (ITS#1069)
Updated slapd anonymous write default to deny
Updated slapd syntax erorr reporting
Updated -lldap TLS seeding (ITS#948)
Updated -lldap TLS certificate handling (ITS#903)
Updated -lldap referral/reference handling (ITS#905,1047)
Updated -lldap schema safe_string bug (ITS#1092)
Updated maildap
Updated ldaptcl
Updated client usage messages
Build Environment
Added MacOS support (ITS#943)
Update schema files (ITS#955)
Trim experimental options
Updated pthread join/detach test
Documentation
Update tool pages (ITS#938)
OpenLDAP 2.0.7 Release
Fixed -lldap TLS data ready bug (ITS#821)
Fixed -lldap abandon unsent op bug (ITS#837)
Fixed -lldap URL search w/o host bug (ITS#843)
Fixed -lldap referral handling bugs (ITS#799 ITS#817)
Fixed -lldap UTF-8 bug (ITS#860)
Fixed ldappasswd old passwd encoding bug
Fixed slapd DN whitespace compression (ITS#852)
Fixed slapd spasswd mutex bug
Fixed slapd ACL nameuid bug
Fixed slapd SASL layering bug
Fixed slapd unknown authc method bug (ITS#831 ITS#844)
Fixed slapd TLSVerifyClient config bug
Fixed tools passwd clearing bug
Updated -lldap TLS/SASL error reporting
Updated -llber large element handling
Updated slapadd error reporting
Updated slapd chroot handling (ITS#810)
Updated slapd subschema subentry
Updated slapd manageDSAit support (ITS#851)
Updated slapd root DIT support
Updated slapd/back-sql
Updated getaddrinfo error handling (ITS#845 ITS#845 ITS#863)
Added -lldap SASL/EXTERNAL (TLS) support (ITS#865)
Added slapd additional syntax/matching rule support
Removed lint
Build Environment
Fixed make comment bug (ITS#811)
Fixed $(DESTDIR) install (ITS#806)
Added proxy check to passwd test
Fixed slurpd tempdir perms (ITS#840)
Documentation
Updated ldappasswd(1)
Updated ldap_url(3)
Updated slapd.conf(5)
Updated slapd(8)
Updated slurpd(8)
OpenLDAP 2.0.6 Release
Build Environment
Fixed schema install (ITS#802)
Added libtool customizations
Re-enabled module support
Documentation
Update ldapsearch(1)
OpenLDAP 2.0.5 Release
Fixed slapd/ldbm/search confusing log message (ITS#771)
Fixed slapd/sasl no cred bug
Fixed slapd idletimeout lock bug (ITS#767)
Fixed slapd caseIgnoreIA5string indexing bug (ITS#786)
Fixed slurpd TLS initialization bug (ITS#768)
Fixed slurpd empty one shot hang (ITS#798)
Fixed -lldap SASL ctx close bug (ITS#790)
Fixed -lldap first/next attribute bug (ITS#778)
Fixed -lldap (v2) rebind URL bug
Fixed -lldap msgfree NULL bug (ITS#800)
Fixed -lldif empty value bug
Fixed -llber stringal len=0 bug
Updated -llber bprint routine
Build Environment
Fixed LDFLAGS/-rpath usage
Fixed IPv6 detection (ITS#669,ITS#770)
Fixed VPATH schema install
Updated libtool to 1.3.5
Added Darwin support
Disabled module support
OpenLDAP 2.0.4 Release
Fixed clients printf/usage bugs (ITS#749)
Fixed -lldap SASL interoperability bug
Fixed -lldap PF_LOCAL declaration/call bugs
Fixed slapd SASL log error (ITS#759)
Fixed slapd spasswd support (ITS#751)
Fixed slapd/tools fixed sasl_props bug (ITS#761)
Updated slurpd SASL support
Added slapd accept(2) sockopt workaround (ITS#760)
Added slurpd TLS support
Removed lint
Build Environment
Fixed --enable-spasswd (ITS#751)
Documentation
Fixed ldif(5) file:/// bug (ITS#750)
Updated ldap_schema(3)
OpenLDAP 2.0.3 Release
Fixed -lldap KBIND typo (ITS#717)
Fixed slapd ;binary search request subtyping
OpenLDAP 2.0.2 Release
Fixed KBIND (ITS#717)
Fixed clients/tools -R handling (ITS#726)
Fixed -lldap SASL got_max_ssf bug
Fixed -lldap TCP_NODELAY bug
Fixed -lldap TLS issues (ITS#733)
Fixed -lldap_r NT threads (ITS#732)
Fixed -llutil sa_flags never set bug
Fixed ldappasswd -A -S crash (ITS#714)
Fixed ldappasswd user argument usage
Fixed slapd disallow bind_anon (ITS#721)
Fixed slapd IPv6 issues (ITS#716)
Fixed slapd MIT KPASSWD Compatibility (ITS#715)
Fixed slapd time syntax routines (ITS#713)
Fixed slapd/ldbm DB_PRIVATE not set bug (ITS#725)
Fixed slapd/ldbm nextid reporting bug
Fixed slapd syntaxes/mr routines (ITS#739)
Fixed slurpd -r buffer overflow (ITS#722)
Updated slapd rootDSE inappropriate op handling
Added slapd syntax/mr routines
Added slapd allow/disallow options
Added slapd defaultSearchBase and DN verify (ITS#723)
Removed lint
Build Environment
Added test000-rootdse
Added Corba & Java Schema
Updated MSVC projects for BDB 3.1
Fixed Kerberos detection (ITS#717)
Remove incompatible contribWare
Documentation
Fixed ldappasswd(1) usage
Fixed ldapmodify(1) (ITS#719)
Updated release documents (ITS#720)
OpenLDAP 2.0.1 Release
Fixed StartTLS & ldaps:// client SDK
Fixed slapd session close deadlock (ITS#704)
Fixed slapd SSF ACLs
Fixed slapd "entry" ACLs
Updated slapd MAXARGS to 200
Updated slapd nisNetgroupTriple validation routine (ITS#705)
Updated slapd bootParameter validation routine (ITS#706)
Updated slapd nameUID syntax to reuse DN routines for uniqueMember
Updated client tool usage (ITS#710)
Build Environment
Fixed MSC tcp_close redefine
Documentation
Updated manual pages references
Updated release documents
Updated back-sql documents
Updated "to do" list
OpenLDAP 2.0.0 Release
Initial release of OpenLDAP 2.0
---
$OpenLDAP$
COPYRIGHT
View file @ 6c343311
Copyright (c) 1992-1996 Regents of the University of Michigan.
Copyright 1998-2001 The OpenLDAP Foundation
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted only as authorized by the OpenLDAP
Public License. A copy of this license is available at
http://www.OpenLDAP.org/license.html or in file LICENSE in the
top-level directory of the distribution.
OpenLDAP is a registered trademark of the OpenLDAP Foundation.
Individual files and/or contributed packages may be copyright by
other parties and subject to additional restrictions.
This work is derived from the University of Michigan LDAP v3.3
distribution. Information concerning this software is available
at: http://www.umich.edu/~dirsvcs/ldap/
This work also contains materials derived from public sources.
Additional Information about OpenLDAP can be obtained at:
http://www.openldap.org/
or by sending e-mail to:
info@OpenLDAP.org
---
Portions Copyright (c) 1992-1996 Regents of the University of Michigan.
All rights reserved.
Redistribution and use in source and binary forms are permitted
......
INSTALL
View file @ 6c343311
Making and Installing the U-M LDAP Distribution
Making and Installing the OpenLDAP Distribution
===============================================
** It is recommended that you read or at least skim through ALL of the
** instructions in this file before attempting to build the software.
This file provides brief instructions on how to build and install
OpenLDAP on UNIX (and UNIX-like) system. More detailed information
and instructions can be found in The OpenLDAP Administrator's Guide
(http://www.openldap.org/doc/admin/).
If you want to build binaries for more than one platform from a single
source tree, skip ahead to the "Building LDAP For More Than One Platform"
section near the end of this file. If you are planning to run slapd,
you should read the "SLAPD and SLURPD Administrator's Guide", found in
the doc/guides/ directory within the distribution.
It is recommended that you read, or at least skim through, ALL of the
instructions in this file before attempting to build the software.
If you simply want to build LDAP for a single machine platform, follow
these steps:
It is also recommended you review The OpenLDAP Administrator's Guide
(http://www.openldap.org/doc/admin/), the Frequently Asked Questions
(http://www.openldap.org/faq/) pages, in particular the Installation
section (http://www.openldap.org/faq/index.cgi?file=8) and Platform
Hints (http://www.openldap.org/faq/index.cgi?file=9) should be
examined.
1. untar the distribution and cd to the top:
Making and Installing the OpenLDAP Distribution
-----------------------------------------------
% zcat ldap-3.3.tar.Z | tar xf -
% cd ldap-3.3
1. Unpack the distribution and change directory:
If you are reading this file, you probably have already done this!
% tar xfz openldap-VERSION.tgz
% cd openldap-VERSION
(replacing VERSION with the appropriate version string). If you
are reading this file, you probably have already done this!
2. edit the files Make-common and include/ldapconfig.h.edit to configure
the software for your site (the files are well-commented):
2. Type:
% vi Make-common
% vi include/ldapconfig.h.edit
% ./configure --help
Note that you should NOT need to edit the Makefile located at the
top of the distribution.
to list available configuration options. A description of these
options is provided in the 'CONFIGURE OPTIONS' section below.
If you just want to see if things will build, you can leave the
configuration alone and change it later.
The configure script uses environmental variables for determining
compiler/linker options including:
If you have the ISODE package built and want to build the
LDAP-to-X.500 server (ldapd), be sure to uncomment the appropriate
lines near the end of the Make-common file. By default only the
stand-alone server, LDAP libraries and client software are built.
Variable Description Example
CC C compiler gcc
CFLAGS C flags -O -g
CPPFLAGS cpp flags -I/path/include -Ddef
LDFLAGS ld flags -L/usr/local/lib
LIBS libraries -llib
PATH command path /usr/local/bin:/usr/bin:/bin
3. make the software:
3. Configure the build system
% make
% [env settings] ./configure [options]
If all goes well, then make will figure out what platform you are on,
pick a compiler to use, construct Makefiles, and build everything.
If you see a message like "unknown platform..." LDAP has probably not
been set up to build on your machine. See the file build/PORTS for
hints on what to do in that case.
If all goes well, the configure script with automatically detect
the appropriate settings. However, you may need to specify
options and/or environment variables to obtain desired results.
Note that if your make does not use the Bourne (sh) shell by
default when executing internal scripts (reportedly the case on SGI
machines at least), you will need to run the make explicitly from
within a Bourne shell. If you a syntax error such as "Missing ]"
when you do the make under your usual shell, try this:
4. Build dependencies
% sh
$ make
% make depend
If you don't like the some of the platform-specific options chosen
by the automatic build process (such as the compiler to use, etc),
you can intervene and edit them before anything is actually compiled
by explicitly doing a "make platform" step, editing the .make-platform
file (actually a link to the file to be edited), and then doing a
regular make:
5. Build the system
% make platform
% vi .make-platform
% make
% make
If you want to choose the build platform yourself from among those that
the distribution supports, cd to the appropriate directory underneath
build/platforms and make from there. For example, if you are on a
machine running SunOS 4.1.4 and you want to force the use of the cc
compiler, you would do this:
If all goes well, the system will build as configured. If not,
return to step 3 after reviewing the configuration settings. You
may want to consult the Platform Hints subsection of the FAQ if
you have not done so already.
% cd build/platforms/sunos4-cc
% make
6. Test the standalone system
If you want to run some simple tests after the build is complete, you
can do this:
This step requires the standalone LDAP server, slapd(8), with
LDBM support.
% make test
% make test
4. install the binaries and man pages. You may need to be superuser to
do this (depending on where you are installing things):
If all goes well, the system has been built as configured. If
not, return to step 4 after reviewing your configuration
settings. You may want to consult the Installation section of
the FAQ if you have not done so already.
% su
# make install
7. install the binaries and man pages. You may need to be come the
super-user (e.g. root) to do this (depending on where you are
installing things):
That's it! See the man pages for the individual clients for information
on configuring and using them. Eventually you will probably want to
edit the configuration files used by the various clients (installed in
the LDAP etc directory). The files are:
% su root -c 'make install'
ldapfilter.conf - search filter configuration
ldapfriendly - mapping of X.500 names to human-friendly names
ldapsearchprefs.conf - search object definitions
ldaptemplates.conf - display template definitions
8. That's it!
There are section 5 man pages for all of these files.
See the OpenLDAP Administrator's Guide and the manual pages for the
individual applications for configuration and use information. You may
also want to edit the configuration files used by the various
components. These configuration files are located in the OpenLDAP
configuration directory (normally /usr/local/etc/openldap).
ldap.conf client defaults
ldapfilter.conf search filter configuration
ldapsearchprefs.conf search object definitions
ldaptemplates.conf display template definitions
slapd.conf Standalone LDAP daemon
schema/*.schema Schema Definitions
Building LDAP For More Than One Platform
End of OpenLDAP INSTALL file.
It is now possible to build LDAP for more than one platform from the same
source tree. This is accomplished by some rules in the Makefiles that
create a shadow (linked) directory tree where the binaries are placed.
$OpenLDAP: pkg/openldap-guide/release/install.sdf,v 1.12 2000/09/09
21:16:09 kurt Exp $
Follow these steps for each different platform:
1. move to the directory that matches the platform and compiler you
want to build for and type make. The directories are all located
underneath the build/platforms directory. If your platform is not
there, you may need to do a port - see the build/PORTS file for
more information. For a Sun running SunOS 4.1.4, you might do
this:
% cd build/platforms/sunos4-cc
% make links
This will create a linked source area.
2. move to the new directory and make as for a single platform. Follow steps
1-4 above to accomplish this. For example:
% cd obj-sunos4-cc
% make
That's all there is to it. You can also create the linked source area(s)
by just typing "make links" at the top of the distribution, in which case
the Makefile will try to automatically determine the platform and
compiler.
End of LDAP INSTALL file.
LICENSE 0 → 100644
View file @ 6c343311
The OpenLDAP Public License
Version 2.7, 7 September 2001
Redistribution and use of this software and associated documentation
("Software"), with or without modification, are permitted provided
that the following conditions are met:
1. Redistributions of source code must retain copyright statements
and notices,
2. Redistributions in binary form must reproduce applicable copyright
statements and notices, this list of conditions, and the following
disclaimer in the documentation and/or other materials provided
with the distribution, and
3. Redistributions must contain a verbatim copy of this document.
The OpenLDAP Foundation may revise this license from time to time.
Each revision is distinguished by a version number. You may use
this Software under terms of this license revision or under the
terms of any subsequent revision of the license.
THIS SOFTWARE IS PROVIDED BY THE OPENLDAP FOUNDATION AND ITS
CONTRIBUTORS ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE OPENLDAP FOUNDATION, ITS CONTRIBUTORS, OR THE AUTHOR(S)
OR OWNER(S) OF THE SOFTWARE BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
The names of the authors and copyright holders must not be used in
advertising or otherwise to promote the sale, use or other dealing
in this Software without specific, written prior permission. Title
to copyright in this Software shall at all times remain with
copyright holders.
OpenLDAP is a registered trademark of the OpenLDAP Foundation.
Copyright 1999-2001 The OpenLDAP Foundation, Redwood City,
California, USA. All Rights Reserved. Permission to copy and
distribute verbatim copies of this document is granted.
Makefile.in 0 → 100644
View file @ 6c343311
# $OpenLDAP$
# Master Makefile for OpenLDAP
##
## Copyright 1998-2000 The OpenLDAP Foundation, Redwood City, California, USA
## All rights reserved.
##
## Redistribution and use in source and binary forms are permitted only
## as authorized by the OpenLDAP Public License. A copy of this
## license is available at http://www.OpenLDAP.org/license.html or
## in file LICENSE in the top-level directory of the distribution.
##
SUBDIRS= include libraries clients servers tests doc
CLEANDIRS= contrib
INSTALLDIRS=
makefiles: FORCE
./config.status
# force a make all before make install
# only done at the top-level
install-common: all FORCE
clean-local: FORCE
$(RM) config.log
veryclean-local: FORCE
$(RM) config.cache config.status libtool stamp-h stamp-h.in
distclean: veryclean FORCE
test: FORCE
cd tests; make test
README
View file @ 6c343311
UM-LDAP 3.3 README file
OpenLDAP 2.0 README
For a description of what this distribution contains, see the
ANNOUNCEMENT file in this directory. For a description of
changes from previous releases, see the CHANGES file in this
directory.
This is the UM-LDAP version 3.3 distribution. For a description of
what this distribution contains, see the ANNOUNCEMENT file in this
directory. For a description of changes from previous releases,
see the CHANGES file in this directory. For a more detailed
description of how to make and install the distribution, see the
INSTALL file in this directory. For more information on making and
installing slapd, see the "SLAPD and SLURPD Administrator's Guide"
in the doc/guides/ directory.
This is the first release of 2.0 and includes significant
changes from prior releases. The software may be a little
rough around the edges, use with appropriate care. Those
seeking stable LDAP servers may want to use 1.2.
MAKING AND INSTALLING THE DISTRIBUTION
You should be able to make and install the distribution with a pretty
standard default configuration by typing the following commands
REQUIRED SOFTWARE
Build OpenLDAP requires a number of software packages to be
preinstalled. Additional information regarding prerequisite
software can be found in the OpenLDAP Administrator's Guide.
Base system (libraries and tools):
Standard C compiler (required)
Cyrus SASL 1.5 (recommended)
OpenSSL 0.9 (recommended)
POSIX REGEX software (required)
% make
% su
# make install
SLAPD:
LDBM compatible datastore (required)
[Sleepycat Berkeley DB 3.2 (recommended) or GDBM]
in this directory. This should produce something that basically
works.
SLURPD:
LTHREAD compatible thread package
[POSIX threads, Mach Cthreads, select others]
You will probably want to do a little configuration to suit your
site, though. There are two files you might want to edit:
CLIENTS/CONTRIB ware:
Depends on package. See per package README.
Make-common This file contains definitions for
where things will be installed, where
to find various things, etc. If you
want to build an ldap server, you'll
definitely need to edit this file
include/ldapconfig.h.edit This file contains #defines used
by many parts of the distribution.
You'll at least want to change
DEFAULT_BASE.
MAKING AND INSTALLING THE DISTRIBUTION
Please see the INSTALL file for basic instructions. More
detailed instructions can be found in the OpenLDAP
Admnistrator's Guide (see DOCUMENTATION section).
See the INSTALL file in this directory for more information.
DOCUMENTATION
There are man pages for most programs in the distribution and
routines in the various libraries. See ldap(3) for details.
There are man pages for most programs in the distribution and
routines in the various libraries. See ldap(3) for details.
The OpenLDAP website is available and contains the latest LDAP
news, releases announcements, pointers to other LDAP resources,
etc.. It is located at:
http://www.OpenLDAP.org/
There is a postscript version of an administrator's guide for
slapd in doc/guides/slapd.ps.
The OpenLDAP Administrator's Guide is available at:
http://www.openldap.org/doc/admin/
There is an LDAP homepage available that contains the latest
LDAP news, releases announcements, pointers to other LDAP resources,
etc. You can access it at this URL:
The OpenLDAP Software FAQ is available at:
http://www.openldap.org/faq/index.cgi
http://www.umich.edu/~rsug/ldap/
FEEDBACK / PROBLEM REPORTS
SUPPORT / FEEDBACK / PROBLEM REPORTS / DISCUSSIONS
OpenLDAP is user supported. If you have problems, please
review the OpenLDAP FAQ <http://www.openldap.org/faq/> and
archives of the OpenLDAP-software and OpenLDAP-bugs mailing
lists <http://www.openldap.org/lists/>. If you cannot find
the answer, please enquire on the OpenLDAP-software list.
We would appreciate any feedback you can provide. If you have
problems, report them to this address:
Issues, such as bug reports, should be reported using our
our Issue Tracking System <http://www.OpenLDAP.com/its/> or
by sending mail to OpenLDAP-its@OpenLDAP.org. Do not use
this system for software enquiries. Please direct these
to an appropriate mailing list.
ldap-support@umich.edu
---
$OpenLDAP$
acconfig.h 0 → 100644
View file @ 6c343311
/*
* Copyright 1998-2000 The OpenLDAP Foundation, Redwood City, California, USA
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted only as authorized by the OpenLDAP
* Public License. A copy of this * license is available at
* http://www.OpenLDAP.org/license.html or in file LICENSE in the
* top-level directory of the distribution.
*/
#ifndef _LDAP_PORTABLE_H
#define _LDAP_PORTABLE_H
/* end of preamble */
@TOP@
/* define this if needed to get reentrant functions */
#ifndef REENTRANT
#undef REENTRANT
#endif
#ifndef _REENTRANT
#undef _REENTRANT
#endif
/* define this if needed to get threadsafe functions */
#ifndef THREADSAFE
#undef THREADSAFE
#endif
#ifndef _THREADSAFE
#undef _THREADSAFE
#endif
#ifndef THREAD_SAFE
#undef THREAD_SAFE
#endif
#ifndef _THREAD_SAFE
#undef _THREAD_SAFE
#endif
#ifndef _SGI_MP_SOURCE
#undef _SGI_MP_SOURCE
#endif
/* define this if TIOCGWINSZ is defined in sys/ioctl.h */
#undef GWINSZ_IN_SYS_IOCTL
/* These are defined in ldap_features.h */
/*
LDAP_API_FEATURE_X_OPENLDAP_REENTRANT
LDAP_API_FEATURE_X_OPENLDAP_THREAD_SAFE
LDAP_API_FEATURE_X_OPENLDAP_V2_KBIND
LDAP_API_FEATURE_X_OPENLDAP_V2_REFERRALS
*/
/* These are defined in lber_types.h */
/*
LBER_INT_T
LBER_LEN_T
LBER_SOCKET_T
LBER_TAG_T
*/
/* define to character address type */
#undef caddr_t
/* define to signed size type */
#undef ssize_t
/* Leave that blank line there!! Autoheader needs it. */
@BOTTOM@
/* begin of postamble */
#ifdef _WIN32
/* don't suck in all of the win32 api */
# define WIN32_LEAN_AND_MEAN 1
#endif
#ifndef LDAP_NEEDS_PROTOTYPES
/* force LDAP_P to always include prototypes */
#define LDAP_NEEDS_PROTOTYPES 1
#endif
#ifdef HAVE_STDDEF_H
# include <stddef.h>
#endif
#if defined(LDAP_DEVEL) && !defined(LDAP_TEST)
#define LDAP_TEST
#endif
#if defined(LDAP_TEST) && !defined(LDAP_DEBUG)
#define LDAP_DEBUG
#endif
#include "ldap_cdefs.h"
#include "ldap_features.h"
#include "ac/assert.h"
#endif /* _LDAP_PORTABLE_H */
acinclude.m4 0 → 100644
View file @ 6c343311
dnl
dnl Copyright 1998-2001 The OpenLDAP Foundation, All Rights Reserved.
dnl COPYING RESTRICTIONS APPLY, See COPYRIGHT file
dnl
dnl OpenLDAP Autoconf Macros
dnl
divert(-1)
builtin(include, build/openldap.m4)dnl
aclocal.m4 0 → 100644
View file @ 6c343311
dnl aclocal.m4 generated automatically by aclocal 1.4a
dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
dnl This program is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
dnl PARTICULAR PURPOSE.
dnl
dnl Copyright 1998-2001 The OpenLDAP Foundation, All Rights Reserved.
dnl COPYING RESTRICTIONS APPLY, See COPYRIGHT file
dnl
dnl OpenLDAP Autoconf Macros
dnl
divert(-1)
builtin(include, build/openldap.m4)dnl
# Do all the work for Automake. This macro actually does too much --
# some checks are only needed if your package does certain things.
# But this isn't really a big deal.
# serial 1
dnl Usage:
dnl AM_INIT_AUTOMAKE(package,version, [no-define])
AC_DEFUN(AM_INIT_AUTOMAKE,
[AC_REQUIRE([AC_PROG_INSTALL])
dnl We require 2.13 because we rely on SHELL being computed by configure.
AC_PREREQ([2.13])
PACKAGE=[$1]
AC_SUBST(PACKAGE)
VERSION=[$2]
AC_SUBST(VERSION)
dnl test to see if srcdir already configured
if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
ifelse([$3],,
AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
AC_REQUIRE([AM_SANITY_CHECK])
AC_REQUIRE([AC_ARG_PROGRAM])
dnl FIXME This is truly gross.
missing_dir=`cd $ac_aux_dir && pwd`
AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
dnl Set install_sh for make dist
install_sh="$missing_dir/install-sh"
test -f "$install_sh" || install_sh="$missing_dir/install.sh"
AC_SUBST(install_sh)
dnl We check for tar when the user configures the end package.
dnl This is sad, since we only need this for "dist". However,
dnl there's no other good way to do it. We prefer GNU tar if
dnl we can find it. If we can't find a tar, it doesn't really matter.
AC_CHECK_PROGS(AMTAR, gnutar gtar tar)
dnl We need awk for the "check" target. The system "awk" is bad on
dnl some platforms.
AC_REQUIRE([AC_PROG_AWK])
AMTARFLAGS=
if test -n "$AMTAR"; then
if $SHELL -c "$AMTAR --version" > /dev/null 2>&1; then
dnl We have GNU tar.
AMTARFLAGS=o
fi
fi
AC_SUBST(AMTARFLAGS)
AC_REQUIRE([AC_PROG_MAKE_SET])])
#
# Check to make sure that the build environment is sane.
#
AC_DEFUN(AM_SANITY_CHECK,
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
echo timestamp > conftestfile
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
if test "[$]*" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftestfile`
fi
if test "[$]*" != "X $srcdir/configure conftestfile" \
&& test "[$]*" != "X conftestfile $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
alias in your environment])
fi
test "[$]2" = conftestfile
)
then
# Ok.
:
else
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
rm -f conftest*
AC_MSG_RESULT(yes)])
dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
dnl The program must properly implement --version.
AC_DEFUN(AM_MISSING_PROG,
[AC_MSG_CHECKING(for working $2)
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if ($2 --version) < /dev/null > /dev/null 2>&1; then
$1=$2
AC_MSG_RESULT(found)
else
$1="$3/missing $2"
AC_MSG_RESULT(missing)
fi
AC_SUBST($1)])
# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
# Save cache, so that ltconfig can load it
AC_CACHE_SAVE
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| AC_MSG_ERROR([libtool configure failed])
# Reload cache, that may have been modified by ltconfig
AC_CACHE_LOAD
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl
# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
])
AC_DEFUN(AC_LIBTOOL_SETUP,
[AC_PREREQ(2.13)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
case "$target" in
NONE) lt_target="$host" ;;
*) lt_target="$target" ;;
esac
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
[libtool_flags="$libtool_flags --enable-dlopen"])
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[libtool_flags="$libtool_flags --enable-win32-dll"])
AC_ARG_ENABLE(libtool-lock,
[ --disable-libtool-lock avoid locking (might break parallel builds)])
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS="$SAVE_CFLAGS"
fi
;;
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[*-*-cygwin* | *-*-mingw*)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(AS, as, false)
AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
])
esac
])
# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_SHARED, [dnl
define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_STATIC, [dnl
define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])
# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
changequote(,)dnl
[\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
else
ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$ac_cv_path_LD"
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_PROG_LD_GNU
])
AC_DEFUN(AC_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
ac_cv_prog_gnu_ld=yes
else
ac_cv_prog_gnu_ld=no
fi])
])
# AC_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
ac_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -B"
break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -p"
break
else
ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
])
# AC_CHECK_LIBM - check for math library
AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case "$lt_target" in
*-*-beos* | *-*-cygwin*)
# These system don't have libm
;;
*-ncr-sysv4.3*)
AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
*)
AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library, adds --enable-ltdl-convenience to
# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'. Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library, and adds --enable-ltdl-install to
# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'. Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_CHECK_LIB(ltdl, main,
[test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
[if test x"$enable_ltdl_install" = xno; then
AC_MSG_WARN([libltdl not installed, but installation disabled])
else
enable_ltdl_install=yes
fi
])
if test x"$enable_ltdl_install" = x"yes"; then
ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
else
ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
LIBLTDL="-lltdl"
INCLTDL=
fi
])
dnl old names
AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
dnl This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])dnl
# serial 1
# @defmac AC_PROG_CC_STDC
# @maindex PROG_CC_STDC
# @ovindex CC
# If the C compiler in not in ANSI C mode by default, try to add an option
# to output variable @code{CC} to make it so. This macro tries various
# options that select ANSI C on some system or another. It considers the
# compiler to be in ANSI C mode if it handles function prototypes correctly.
#
# If you use this macro, you should check after calling it whether the C
# compiler has been set to accept ANSI C; if not, the shell variable
# @code{am_cv_prog_cc_stdc} is set to @samp{no}. If you wrote your source
# code in ANSI C, you can make an un-ANSIfied copy of it by using the
# program @code{ansi2knr}, which comes with Ghostscript.
# @end defmac
AC_DEFUN(AM_PROG_CC_STDC,
[AC_REQUIRE([AC_PROG_CC])
AC_BEFORE([$0], [AC_C_INLINE])
AC_BEFORE([$0], [AC_C_CONST])
dnl Force this before AC_PROG_CPP. Some cpp's, eg on HPUX, require
dnl a magic option to avoid problems with ANSI preprocessor commands
dnl like #elif.
dnl FIXME: can't do this because then AC_AIX won't work due to a
dnl circular dependency.
dnl AC_BEFORE([$0], [AC_PROG_CPP])
AC_MSG_CHECKING(for ${CC-cc} option to accept ANSI C)
AC_CACHE_VAL(am_cv_prog_cc_stdc,
[am_cv_prog_cc_stdc=no
ac_save_CC="$CC"
# Don't try gcc -ansi; that turns off useful extensions and
# breaks some systems' header files.
# AIX -qlanglvl=ansi
# Ultrix and OSF/1 -std1
# HP-UX 10.20 and later -Ae
# HP-UX older versions -Aa -D_HPUX_SOURCE
# SVR4 -Xc -D__EXTENSIONS__
for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
do
CC="$ac_save_CC $ac_arg"
AC_TRY_COMPILE(
[#include <stdarg.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
struct buf { int x; };
FILE * (*rcsopen) (struct buf *, struct stat *, int);
static char *e (p, i)
char **p;
int i;
{
return p[i];
}
static char *f (char * (*g) (char **, int), char **p, ...)
{
char *s;
va_list v;
va_start (v,p);
s = g (p, va_arg (v,int));
va_end (v);
return s;
}
int test (int i, double x);
struct s1 {int (*f) (int a);};
struct s2 {int (*f) (double a);};
int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
int argc;
char **argv;
], [
return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
],
[am_cv_prog_cc_stdc="$ac_arg"; break])
done
CC="$ac_save_CC"
])
if test -z "$am_cv_prog_cc_stdc"; then
AC_MSG_RESULT([none needed])
else
AC_MSG_RESULT($am_cv_prog_cc_stdc)
fi
case "x$am_cv_prog_cc_stdc" in
x|xno) ;;
*) CC="$CC $am_cv_prog_cc_stdc" ;;
esac
])
dnl From Jim Meyering.
# serial 1
AC_DEFUN(AM_HEADER_TIOCGWINSZ_NEEDS_SYS_IOCTL,
[AC_REQUIRE([AM_SYS_POSIX_TERMIOS])
AC_CACHE_CHECK([whether use of TIOCGWINSZ requires sys/ioctl.h],
am_cv_sys_tiocgwinsz_needs_sys_ioctl_h,
[am_cv_sys_tiocgwinsz_needs_sys_ioctl_h=no
gwinsz_in_termios_h=no
if test $am_cv_sys_posix_termios = yes; then
AC_EGREP_CPP([yes],
[#include <sys/types.h>
# include <termios.h>
# ifdef TIOCGWINSZ
yes
# endif
], gwinsz_in_termios_h=yes)
fi
if test $gwinsz_in_termios_h = no; then
AC_EGREP_CPP([yes],
[#include <sys/types.h>
# include <sys/ioctl.h>
# ifdef TIOCGWINSZ
yes
# endif
], am_cv_sys_tiocgwinsz_needs_sys_ioctl_h=yes)
fi
])
if test $am_cv_sys_tiocgwinsz_needs_sys_ioctl_h = yes; then
AC_DEFINE(GWINSZ_IN_SYS_IOCTL,1,
[Define if TIOCGWINSZ requires sys/ioctl.h])
fi
])
dnl From Jim Meyering.
# serial 1
AC_DEFUN(AM_SYS_POSIX_TERMIOS,
[AC_CACHE_CHECK([POSIX termios], am_cv_sys_posix_termios,
[AC_TRY_LINK([#include <sys/types.h>
#include <unistd.h>
#include <termios.h>],
[/* SunOS 4.0.3 has termios.h but not the library calls. */
tcgetattr(0, 0);],
am_cv_sys_posix_termios=yes,
am_cv_sys_posix_termios=no)])
])
# From Ulrich Drepper.
# serial 1
AC_DEFUN(AM_TYPE_PTRDIFF_T,
[AC_CACHE_CHECK([for ptrdiff_t], am_cv_type_ptrdiff_t,
[AC_TRY_COMPILE([#include <stddef.h>], [ptrdiff_t p],
am_cv_type_ptrdiff_t=yes, am_cv_type_ptrdiff_t=no)])
if test $am_cv_type_ptrdiff_t = yes; then
AC_DEFINE(HAVE_PTRDIFF_T,1,[Define if system has ptrdiff_t type])
fi
])
build/build.dsp 0 → 100644
View file @ 6c343311
# Microsoft Developer Studio Project File - Name="build" - Package Owner=<4>
# Microsoft Developer Studio Generated Build File, Format Version 5.00
# ** DO NOT EDIT **
# TARGTYPE "Win32 (x86) External Target" 0x0106
CFG=build - Win32 DLL Debug
!MESSAGE This is not a valid makefile. To build this project using NMAKE,
!MESSAGE use the Export Makefile command and run
!MESSAGE
!MESSAGE NMAKE /f "build.mak".
!MESSAGE
!MESSAGE You can specify a configuration when running NMAKE
!MESSAGE by defining the macro CFG on the command line. For example:
!MESSAGE
!MESSAGE NMAKE /f "build.mak" CFG="build - Win32 DLL Debug"
!MESSAGE
!MESSAGE Possible choices for configuration are:
!MESSAGE
!MESSAGE "build - Win32 Release" (based on "Win32 (x86) External Target")
!MESSAGE "build - Win32 Debug" (based on "Win32 (x86) External Target")
!MESSAGE "build - Win32 Single Debug" (based on "Win32 (x86) External Target")
!MESSAGE "build - Win32 Single Release" (based on\
"Win32 (x86) External Target")
!MESSAGE "build - Win32 DLL Debug" (based on "Win32 (x86) External Target")
!MESSAGE "build - Win32 DLL Release" (based on "Win32 (x86) External Target")
!MESSAGE
# Begin Project
# PROP Scc_ProjName ""
# PROP Scc_LocalPath ""
!IF "$(CFG)" == "build - Win32 Release"
# PROP BASE Use_Debug_Libraries 0
# PROP BASE Output_Dir "Release"
# PROP BASE Intermediate_Dir "Release"
# PROP BASE Cmd_Line "NMAKE /f build.mak"
# PROP BASE Rebuild_Opt "/a"
# PROP BASE Target_File "build.exe"
# PROP BASE Bsc_Name "build.bsc"
# PROP BASE Target_Dir ""
# PROP Use_Debug_Libraries 0
# PROP Output_Dir "Release"
# PROP Intermediate_Dir "Release"
# PROP Cmd_Line "NMAKE /f build.mak"
# PROP Rebuild_Opt "/a"
# PROP Target_File "build.txt"
# PROP Bsc_Name "build.bsc"
# PROP Target_Dir ""
!ELSEIF "$(CFG)" == "build - Win32 Debug"
# PROP BASE Use_Debug_Libraries 1
# PROP BASE Output_Dir "Debug"
# PROP BASE Intermediate_Dir "Debug"
# PROP BASE Cmd_Line "NMAKE /f build.mak"
# PROP BASE Rebuild_Opt "/a"
# PROP BASE Target_File "build.exe"
# PROP BASE Bsc_Name "build.bsc"
# PROP BASE Target_Dir ""
# PROP Use_Debug_Libraries 1
# PROP Output_Dir "Debug"
# PROP Intermediate_Dir "Debug"
# PROP Cmd_Line ""
# PROP Rebuild_Opt ""
# PROP Bsc_Name ""
# PROP Target_Dir ""
!ELSEIF "$(CFG)" == "build - Win32 Single Debug"
# PROP BASE Use_Debug_Libraries 1
# PROP BASE Output_Dir "build___"
# PROP BASE Intermediate_Dir "build___"
# PROP BASE Cmd_Line ""
# PROP BASE Rebuild_Opt ""
# PROP BASE Bsc_Name ""
# PROP BASE Target_Dir ""
# PROP Use_Debug_Libraries 1
# PROP Output_Dir "build___"
# PROP Intermediate_Dir "build___"
# PROP Cmd_Line ""
# PROP Rebuild_Opt ""
# PROP Bsc_Name ""
# PROP Target_Dir ""
!ELSEIF "$(CFG)" == "build - Win32 Single Release"
# PROP BASE Use_Debug_Libraries 0
# PROP BASE Output_Dir "build__0"
# PROP BASE Intermediate_Dir "build__0"
# PROP BASE Cmd_Line "NMAKE /f build.mak"
# PROP BASE Rebuild_Opt "/a"
# PROP BASE Target_File "build.exe"
# PROP BASE Bsc_Name "build.bsc"
# PROP BASE Target_Dir ""
# PROP Use_Debug_Libraries 0
# PROP Output_Dir "build__0"
# PROP Intermediate_Dir "build__0"
# PROP Cmd_Line "NMAKE /f build.mak"
# PROP Rebuild_Opt "/a"
# PROP Target_File "build.exe"
# PROP Bsc_Name "build.bsc"
# PROP Target_Dir ""
!ELSEIF "$(CFG)" == "build - Win32 DLL Debug"
# PROP BASE Use_Debug_Libraries 1
# PROP BASE Output_Dir "build__1"
# PROP BASE Intermediate_Dir "build__1"
# PROP BASE Cmd_Line ""
# PROP BASE Rebuild_Opt ""
# PROP BASE Bsc_Name ""
# PROP BASE Target_Dir ""
# PROP Use_Debug_Libraries 1
# PROP Output_Dir "build__1"
# PROP Intermediate_Dir "build__1"
# PROP Cmd_Line ""
# PROP Rebuild_Opt ""
# PROP Bsc_Name ""
# PROP Target_Dir ""
!ELSEIF "$(CFG)" == "build - Win32 DLL Release"
# PROP BASE Use_Debug_Libraries 0
# PROP BASE Output_Dir "build__2"
# PROP BASE Intermediate_Dir "build__2"
# PROP BASE Cmd_Line "NMAKE /f build.mak"
# PROP BASE Rebuild_Opt "/a"
# PROP BASE Target_File "build.exe"
# PROP BASE Bsc_Name "build.bsc"
# PROP BASE Target_Dir ""
# PROP Use_Debug_Libraries 0
# PROP Output_Dir "build__2"
# PROP Intermediate_Dir "build__2"
# PROP Cmd_Line "NMAKE /f build.mak"
# PROP Rebuild_Opt "/a"
# PROP Target_File "build.exe"
# PROP Bsc_Name "build.bsc"
# PROP Target_Dir ""
!ENDIF
# Begin Target
# Name "build - Win32 Release"
# Name "build - Win32 Debug"
# Name "build - Win32 Single Debug"
# Name "build - Win32 Single Release"
# Name "build - Win32 DLL Debug"
# Name "build - Win32 DLL Release"
!IF "$(CFG)" == "build - Win32 Release"
!ELSEIF "$(CFG)" == "build - Win32 Debug"
!ELSEIF "$(CFG)" == "build - Win32 Single Debug"
!ELSEIF "$(CFG)" == "build - Win32 Single Release"
!ELSEIF "$(CFG)" == "build - Win32 DLL Debug"
!ELSEIF "$(CFG)" == "build - Win32 DLL Release"
!ENDIF
# Begin Source File
SOURCE=.\build.mak
# End Source File
# End Target
# End Project
build/build.mak 0 → 100644
View file @ 6c343311
# $OpenLDAP$
#
# Copyright 1998-2000 The OpenLDAP Foundation, All Rights Reserved.
# COPYING RESTRICTIONS APPLY, see COPYRIGHT file
#
all: build.txt
build.txt: version
copy version build.txt
build/config.guess 0 → 100755
View file @ 6c343311
#! /bin/sh
# Attempt to guess a canonical system name.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
# Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Written by Per Bothner <bothner@cygnus.com>.
# Please send patches to <config-patches@gnu.org>.
#
# This script attempts to guess a canonical system name similar to
# config.sub. If it succeeds, it prints the system name on stdout, and
# exits with 0. Otherwise, it exits with 1.
#
# The plan is that this can be called by configure scripts if you
# don't specify an explicit system type (host/target name).
#
# Only a few systems have been added to this list; please add others
# (but try to keep the structure clean).
#
# Use $HOST_CC if defined. $CC may point to a cross-compiler
if test x"$CC_FOR_BUILD" = x; then
if test x"$HOST_CC" != x; then
CC_FOR_BUILD="$HOST_CC"
else
if test x"$CC" != x; then
CC_FOR_BUILD="$CC"
else
CC_FOR_BUILD=cc
fi
fi
fi
# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# (ghazi@noc.rutgers.edu 8/24/94.)
if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
PATH=$PATH:/.attbin ; export PATH
fi
UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
dummy=dummy-$$
trap 'rm -f $dummy.c $dummy.o $dummy; exit 1' 1 2 15
# Note: order is significant - the case branches are not exclusive.
case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
*:NetBSD:*:*)
# Netbsd (nbsd) targets should (where applicable) match one or
# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
# *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
# switched to ELF, *-*-netbsd* would select the old
# object file format. This provides both forward
# compatibility and a consistent mechanism for selecting the
# object file format.
# Determine the machine/vendor (is the vendor relevant).
case "${UNAME_MACHINE}" in
amiga) machine=m68k-cbm ;;
arm32) machine=arm-unknown ;;
atari*) machine=m68k-atari ;;
sun3*) machine=m68k-sun ;;
mac68k) machine=m68k-apple ;;
macppc) machine=powerpc-apple ;;
hp3[0-9][05]) machine=m68k-hp ;;
ibmrt|romp-ibm) machine=romp-ibm ;;
*) machine=${UNAME_MACHINE}-unknown ;;
esac
# The Operating System including object format.
if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
| grep __ELF__ >/dev/null
then
# Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
# Return netbsd for either. FIX?
os=netbsd
else
os=netbsdelf
fi
# The OS release
release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
# contains redundant information, the shorter form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
echo "${machine}-${os}${release}"
exit 0 ;;
alpha:OSF1:*:*)
if test $UNAME_RELEASE = "V4.0"; then
UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
fi
# A Vn.n version is a released version.
# A Tn.n version is a released field test version.
# A Xn.n version is an unreleased experimental baselevel.
# 1.2 uses "1.2" for uname -r.
cat <<EOF >$dummy.s
.data
\$Lformat:
.byte 37,100,45,37,120,10,0 # "%d-%x\n"
.text
.globl main
.align 4
.ent main
main:
.frame \$30,16,\$26,0
ldgp \$29,0(\$27)
.prologue 1
.long 0x47e03d80 # implver \$0
lda \$2,-1
.long 0x47e20c21 # amask \$2,\$1
lda \$16,\$Lformat
mov \$0,\$17
not \$1,\$18
jsr \$26,printf
ldgp \$29,0(\$26)
mov 0,\$16
jsr \$26,exit
.end main
EOF
$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
if test "$?" = 0 ; then
case `./$dummy` in
0-0)
UNAME_MACHINE="alpha"
;;
1-0)
UNAME_MACHINE="alphaev5"
;;
1-1)
UNAME_MACHINE="alphaev56"
;;
1-101)
UNAME_MACHINE="alphapca56"
;;
2-303)
UNAME_MACHINE="alphaev6"
;;
2-307)
UNAME_MACHINE="alphaev67"
;;
esac
fi
rm -f $dummy.s $dummy
echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
exit 0 ;;
Alpha\ *:Windows_NT*:*)
# How do we know it's Interix rather than the generic POSIX subsystem?
# Should we change UNAME_MACHINE based on the output of uname instead
# of the specific Alpha model?
echo alpha-pc-interix
exit 0 ;;
21064:Windows_NT:50:3)
echo alpha-dec-winnt3.5
exit 0 ;;
Amiga*:UNIX_System_V:4.0:*)
echo m68k-cbm-sysv4
exit 0;;
amiga:OpenBSD:*:*)
echo m68k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
*:[Aa]miga[Oo][Ss]:*:*)
echo ${UNAME_MACHINE}-unknown-amigaos
exit 0 ;;
arc64:OpenBSD:*:*)
echo mips64el-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
arc:OpenBSD:*:*)
echo mipsel-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
hkmips:OpenBSD:*:*)
echo mips-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
pmax:OpenBSD:*:*)
echo mipsel-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
sgi:OpenBSD:*:*)
echo mips-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
wgrisc:OpenBSD:*:*)
echo mipsel-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
*:OS/390:*:*)
echo i370-ibm-openedition
exit 0 ;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
echo arm-acorn-riscix${UNAME_RELEASE}
exit 0;;
SR2?01:HI-UX/MPP:*:*)
echo hppa1.1-hitachi-hiuxmpp
exit 0;;
Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
if test "`(/bin/universe) 2>/dev/null`" = att ; then
echo pyramid-pyramid-sysv3
else
echo pyramid-pyramid-bsd
fi
exit 0 ;;
NILE*:*:*:dcosx)
echo pyramid-pyramid-svr4
exit 0 ;;
sun4H:SunOS:5.*:*)
echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
i86pc:SunOS:5.*:*)
echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
sun4*:SunOS:6*:*)
# According to config.sub, this is the proper way to canonicalize
# SunOS6. Hard to guess exactly what SunOS6 will be like, but
# it's likely to be more like Solaris than SunOS4.
echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
sun4*:SunOS:*:*)
case "`/usr/bin/arch -k`" in
Series*|S4*)
UNAME_RELEASE=`uname -v`
;;
esac
# Japanese Language versions have a version number like `4.1.3-JL'.
echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
exit 0 ;;
sun3*:SunOS:*:*)
echo m68k-sun-sunos${UNAME_RELEASE}
exit 0 ;;
sun*:*:4.2BSD:*)
UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
case "`/bin/arch`" in
sun3)
echo m68k-sun-sunos${UNAME_RELEASE}
;;
sun4)
echo sparc-sun-sunos${UNAME_RELEASE}
;;
esac
exit 0 ;;
aushp:SunOS:*:*)
echo sparc-auspex-sunos${UNAME_RELEASE}
exit 0 ;;
atari*:OpenBSD:*:*)
echo m68k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
# The situation for MiNT is a little confusing. The machine name
# can be virtually everything (everything which is not
# "atarist" or "atariste" at least should have a processor
# > m68000). The system name ranges from "MiNT" over "FreeMiNT"
# to the lowercase version "mint" (or "freemint"). Finally
# the system name "TOS" denotes a system which is actually not
# MiNT. But MiNT is downward compatible to TOS, so this should
# be no problem.
atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
exit 0 ;;
atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
exit 0 ;;
*falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
exit 0 ;;
milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
echo m68k-milan-mint${UNAME_RELEASE}
exit 0 ;;
hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
echo m68k-hades-mint${UNAME_RELEASE}
exit 0 ;;
*:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
echo m68k-unknown-mint${UNAME_RELEASE}
exit 0 ;;
sun3*:OpenBSD:*:*)
echo m68k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
mac68k:OpenBSD:*:*)
echo m68k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
mvme68k:OpenBSD:*:*)
echo m68k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
mvme88k:OpenBSD:*:*)
echo m88k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
powerpc:machten:*:*)
echo powerpc-apple-machten${UNAME_RELEASE}
exit 0 ;;
RISC*:Mach:*:*)
echo mips-dec-mach_bsd4.3
exit 0 ;;
RISC*:ULTRIX:*:*)
echo mips-dec-ultrix${UNAME_RELEASE}
exit 0 ;;
VAX*:ULTRIX*:*:*)
echo vax-dec-ultrix${UNAME_RELEASE}
exit 0 ;;
2020:CLIX:*:* | 2430:CLIX:*:*)
echo clipper-intergraph-clix${UNAME_RELEASE}
exit 0 ;;
mips:*:*:UMIPS | mips:*:*:RISCos)
sed 's/^ //' << EOF >$dummy.c
#ifdef __cplusplus
#include <stdio.h> /* for printf() prototype */
int main (int argc, char *argv[]) {
#else
int main (argc, argv) int argc; char *argv[]; {
#endif
#if defined (host_mips) && defined (MIPSEB)
#if defined (SYSTYPE_SYSV)
printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
#endif
#if defined (SYSTYPE_SVR4)
printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
#endif
#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
#endif
#endif
exit (-1);
}
EOF
$CC_FOR_BUILD $dummy.c -o $dummy \
&& ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
&& rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
echo mips-mips-riscos${UNAME_RELEASE}
exit 0 ;;
Night_Hawk:Power_UNIX:*:*)
echo powerpc-harris-powerunix
exit 0 ;;
m88k:CX/UX:7*:*)
echo m88k-harris-cxux7
exit 0 ;;
m88k:*:4*:R4*)
echo m88k-motorola-sysv4
exit 0 ;;
m88k:*:3*:R3*)
echo m88k-motorola-sysv3
exit 0 ;;
AViiON:dgux:*:*)
# DG/UX returns AViiON for all architectures
UNAME_PROCESSOR=`/usr/bin/uname -p`
if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
then
if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
[ ${TARGET_BINARY_INTERFACE}x = x ]
then
echo m88k-dg-dgux${UNAME_RELEASE}
else
echo m88k-dg-dguxbcs${UNAME_RELEASE}
fi
else
echo i586-dg-dgux${UNAME_RELEASE}
fi
exit 0 ;;
M88*:DolphinOS:*:*) # DolphinOS (SVR3)
echo m88k-dolphin-sysv3
exit 0 ;;
M88*:*:R3*:*)
# Delta 88k system running SVR3
echo m88k-motorola-sysv3
exit 0 ;;
XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
echo m88k-tektronix-sysv3
exit 0 ;;
Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
echo m68k-tektronix-bsd
exit 0 ;;
*:IRIX*:*:*)
echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
exit 0 ;;
????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
i?86:AIX:*:*)
echo i386-ibm-aix
exit 0 ;;
*:AIX:2:3)
if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
sed 's/^ //' << EOF >$dummy.c
#include <sys/systemcfg.h>
main()
{
if (!__power_pc())
exit(1);
puts("powerpc-ibm-aix3.2.5");
exit(0);
}
EOF
$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
echo rs6000-ibm-aix3.2.5
elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
echo rs6000-ibm-aix3.2.4
else
echo rs6000-ibm-aix3.2
fi
exit 0 ;;
*:AIX:*:4)
IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then
IBM_ARCH=rs6000
else
IBM_ARCH=powerpc
fi
if [ -x /usr/bin/oslevel ] ; then
IBM_REV=`/usr/bin/oslevel`
else
IBM_REV=4.${UNAME_RELEASE}
fi
echo ${IBM_ARCH}-ibm-aix${IBM_REV}
exit 0 ;;
*:AIX:*:*)
echo rs6000-ibm-aix
exit 0 ;;
ibmrt:4.4BSD:*|romp-ibm:BSD:*)
echo romp-ibm-bsd4.4
exit 0 ;;
ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
exit 0 ;; # report: romp-ibm BSD 4.3
*:BOSX:*:*)
echo rs6000-bull-bosx
exit 0 ;;
DPX/2?00:B.O.S.:*:*)
echo m68k-bull-sysv3
exit 0 ;;
9000/[34]??:4.3bsd:1.*:*)
echo m68k-hp-bsd
exit 0 ;;
hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
echo m68k-hp-bsd4.4
exit 0 ;;
9000/[34678]??:HP-UX:*:*)
case "${UNAME_MACHINE}" in
9000/31? ) HP_ARCH=m68000 ;;
9000/[34]?? ) HP_ARCH=m68k ;;
9000/[678][0-9][0-9])
sed 's/^ //' << EOF >$dummy.c
#define _HPUX_SOURCE
#include <stdlib.h>
#include <unistd.h>
int main ()
{
#if defined(_SC_KERNEL_BITS)
long bits = sysconf(_SC_KERNEL_BITS);
#endif
long cpu = sysconf (_SC_CPU_VERSION);
switch (cpu)
{
case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
case CPU_PA_RISC2_0:
#if defined(_SC_KERNEL_BITS)
switch (bits)
{
case 64: puts ("hppa2.0w"); break;
case 32: puts ("hppa2.0n"); break;
default: puts ("hppa2.0"); break;
} break;
#else /* !defined(_SC_KERNEL_BITS) */
puts ("hppa2.0"); break;
#endif
default: puts ("hppa1.0"); break;
}
exit (0);
}
EOF
(CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
rm -f $dummy.c $dummy
esac
HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
echo ${HP_ARCH}-hp-hpux${HPUX_REV}
exit 0 ;;
3050*:HI-UX:*:*)
sed 's/^ //' << EOF >$dummy.c
#include <unistd.h>
int
main ()
{
long cpu = sysconf (_SC_CPU_VERSION);
/* The order matters, because CPU_IS_HP_MC68K erroneously returns
true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
results, however. */
if (CPU_IS_PA_RISC (cpu))
{
switch (cpu)
{
case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
default: puts ("hppa-hitachi-hiuxwe2"); break;
}
}
else if (CPU_IS_HP_MC68K (cpu))
puts ("m68k-hitachi-hiuxwe2");
else puts ("unknown-hitachi-hiuxwe2");
exit (0);
}
EOF
$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
echo unknown-hitachi-hiuxwe2
exit 0 ;;
9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
echo hppa1.1-hp-bsd
exit 0 ;;
9000/8??:4.3bsd:*:*)
echo hppa1.0-hp-bsd
exit 0 ;;
*9??*:MPE/iX:*:*)
echo hppa1.0-hp-mpeix
exit 0 ;;
hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
echo hppa1.1-hp-osf
exit 0 ;;
hp8??:OSF1:*:*)
echo hppa1.0-hp-osf
exit 0 ;;
i?86:OSF1:*:*)
if [ -x /usr/sbin/sysversion ] ; then
echo ${UNAME_MACHINE}-unknown-osf1mk
else
echo ${UNAME_MACHINE}-unknown-osf1
fi
exit 0 ;;
parisc*:Lites*:*:*)
echo hppa1.1-hp-lites
exit 0 ;;
hppa*:OpenBSD:*:*)
echo hppa-unknown-openbsd
exit 0 ;;
C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
echo c1-convex-bsd
exit 0 ;;
C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
if getsysinfo -f scalar_acc
then echo c32-convex-bsd
else echo c2-convex-bsd
fi
exit 0 ;;
C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
echo c34-convex-bsd
exit 0 ;;
C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
echo c38-convex-bsd
exit 0 ;;
C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
echo c4-convex-bsd
exit 0 ;;
CRAY*X-MP:*:*:*)
echo xmp-cray-unicos
exit 0 ;;
CRAY*Y-MP:*:*:*)
echo ymp-cray-unicos${UNAME_RELEASE}
exit 0 ;;
CRAY*[A-Z]90:*:*:*)
echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
exit 0 ;;
CRAY*TS:*:*:*)
echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
exit 0 ;;
CRAY*T3E:*:*:*)
echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
exit 0 ;;
CRAY*SV1:*:*:*)
echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
exit 0 ;;
CRAY-2:*:*:*)
echo cray2-cray-unicos
exit 0 ;;
F300:UNIX_System_V:*:*)
FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
exit 0 ;;
F301:UNIX_System_V:*:*)
echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
exit 0 ;;
hp300:OpenBSD:*:*)
echo m68k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
i?86:BSD/386:*:* | i?86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
exit 0 ;;
sparc*:BSD/OS:*:*)
echo sparc-unknown-bsdi${UNAME_RELEASE}
exit 0 ;;
*:BSD/OS:*:*)
echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
exit 0 ;;
*:FreeBSD:*:*)
echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
exit 0 ;;
*:OpenBSD:*:*)
echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
exit 0 ;;
i*:CYGWIN*:*)
echo ${UNAME_MACHINE}-pc-cygwin
exit 0 ;;
i*:MINGW*:*)
echo ${UNAME_MACHINE}-pc-mingw32
exit 0 ;;
i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
# How do we know it's Interix rather than the generic POSIX subsystem?
# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
# UNAME_MACHINE based on the output of uname instead of i386?
echo i386-pc-interix
exit 0 ;;
i*:UWIN*:*)
echo ${UNAME_MACHINE}-pc-uwin
exit 0 ;;
p*:CYGWIN*:*)
echo powerpcle-unknown-cygwin
exit 0 ;;
prep*:SunOS:5.*:*)
echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
*:GNU:*:*)
echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
exit 0 ;;
*:Linux:*:*)
# The BFD linker knows what the default object file format is, so
# first see if it will tell us. cd to the root directory to prevent
# problems with other programs or directories called `ld' in the path.
ld_help_string=`cd /; ld --help 2>&1`
ld_supported_emulations=`echo $ld_help_string \
| sed -ne '/supported emulations:/!d
s/[ ][ ]*/ /g
s/.*supported emulations: *//
s/ .*//
p'`
case "$ld_supported_emulations" in
*ia64)
echo "${UNAME_MACHINE}-unknown-linux"
exit 0
;;
i?86linux)
echo "${UNAME_MACHINE}-pc-linux-gnuaout"
exit 0
;;
elf_i?86)
echo "${UNAME_MACHINE}-pc-linux"
exit 0
;;
i?86coff)
echo "${UNAME_MACHINE}-pc-linux-gnucoff"
exit 0
;;
sparclinux)
echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
exit 0
;;
armlinux)
echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
exit 0
;;
elf32arm*)
echo "${UNAME_MACHINE}-unknown-linux-gnuoldld"
exit 0
;;
armelf_linux*)
echo "${UNAME_MACHINE}-unknown-linux-gnu"
exit 0
;;
m68klinux)
echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
exit 0
;;
elf32ppc | elf32ppclinux)
# Determine Lib Version
cat >$dummy.c <<EOF
#include <features.h>
#if defined(__GLIBC__)
extern char __libc_version[];
extern char __libc_release[];
#endif
main(argc, argv)
int argc;
char *argv[];
{
#if defined(__GLIBC__)
printf("%s %s\n", __libc_version, __libc_release);
#else
printf("unkown\n");
#endif
return 0;
}
EOF
LIBC=""
$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null
if test "$?" = 0 ; then
./$dummy | grep 1\.99 > /dev/null
if test "$?" = 0 ; then
LIBC="libc1"
fi
fi
rm -f $dummy.c $dummy
echo powerpc-unknown-linux-gnu${LIBC}
exit 0
;;
esac
if test "${UNAME_MACHINE}" = "alpha" ; then
cat <<EOF >$dummy.s
.data
\$Lformat:
.byte 37,100,45,37,120,10,0 # "%d-%x\n"
.text
.globl main
.align 4
.ent main
main:
.frame \$30,16,\$26,0
ldgp \$29,0(\$27)
.prologue 1
.long 0x47e03d80 # implver \$0
lda \$2,-1
.long 0x47e20c21 # amask \$2,\$1
lda \$16,\$Lformat
mov \$0,\$17
not \$1,\$18
jsr \$26,printf
ldgp \$29,0(\$26)
mov 0,\$16
jsr \$26,exit
.end main
EOF
LIBC=""
$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
if test "$?" = 0 ; then
case `./$dummy` in
0-0)
UNAME_MACHINE="alpha"
;;
1-0)
UNAME_MACHINE="alphaev5"
;;
1-1)
UNAME_MACHINE="alphaev56"
;;
1-101)
UNAME_MACHINE="alphapca56"
;;
2-303)
UNAME_MACHINE="alphaev6"
;;
2-307)
UNAME_MACHINE="alphaev67"
;;
esac
objdump --private-headers $dummy | \
grep ld.so.1 > /dev/null
if test "$?" = 0 ; then
LIBC="libc1"
fi
fi
rm -f $dummy.s $dummy
echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
elif test "${UNAME_MACHINE}" = "mips" ; then
cat >$dummy.c <<EOF
#ifdef __cplusplus
#include <stdio.h> /* for printf() prototype */
int main (int argc, char *argv[]) {
#else
int main (argc, argv) int argc; char *argv[]; {
#endif
#ifdef __MIPSEB__
printf ("%s-unknown-linux-gnu\n", argv[1]);
#endif
#ifdef __MIPSEL__
printf ("%sel-unknown-linux-gnu\n", argv[1]);
#endif
return 0;
}
EOF
$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
elif test "${UNAME_MACHINE}" = "s390"; then
echo s390-ibm-linux && exit 0
else
# Either a pre-BFD a.out linker (linux-gnuoldld)
# or one that does not give us useful --help.
# GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
# If ld does not provide *any* "supported emulations:"
# that means it is gnuoldld.
echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:"
test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
case "${UNAME_MACHINE}" in
i?86)
VENDOR=pc;
;;
*)
VENDOR=unknown;
;;
esac
# Determine whether the default compiler is a.out or elf
cat >$dummy.c <<EOF
#include <features.h>
#ifdef __cplusplus
#include <stdio.h> /* for printf() prototype */
int main (int argc, char *argv[]) {
#else
int main (argc, argv) int argc; char *argv[]; {
#endif
#ifdef __ELF__
# ifdef __GLIBC__
# if __GLIBC__ >= 2
printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
# else
printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
# endif
# else
printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
# endif
#else
printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
#endif
return 0;
}
EOF
$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
fi ;;
# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions
# are messed up and put the nodename in both sysname and nodename.
i?86:DYNIX/ptx:4*:*)
echo i386-sequent-sysv4
exit 0 ;;
i?86:UNIX_SV:4.2MP:2.*)
# Unixware is an offshoot of SVR4, but it has its own version
# number series starting with 2...
# I am not positive that other SVR4 systems won't match this,
# I just have to hope. -- rms.
# Use sysv4.2uw... so that sysv4* matches it.
echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
exit 0 ;;
i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
else
echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
fi
exit 0 ;;
i?86:*:5:7*)
# Fixed at (any) Pentium or better
UNAME_MACHINE=i586
if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then
echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION}
else
echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
fi
exit 0 ;;
i?86:*:3.2:*)
if test -f /usr/options/cb.name; then
UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
elif /bin/uname -X 2>/dev/null >/dev/null ; then
UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
&& UNAME_MACHINE=i586
(/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
&& UNAME_MACHINE=i686
(/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
&& UNAME_MACHINE=i686
echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
else
echo ${UNAME_MACHINE}-pc-sysv32
fi
exit 0 ;;
i?86:*DOS:*:*)
echo ${UNAME_MACHINE}-pc-msdosdjgpp
exit 0 ;;
pc:*:*:*)
# Left here for compatibility:
# uname -m prints for DJGPP always 'pc', but it prints nothing about
# the processor, so we play safe by assuming i386.
echo i386-pc-msdosdjgpp
exit 0 ;;
Intel:Mach:3*:*)
echo i386-pc-mach3
exit 0 ;;
paragon:*:*:*)
echo i860-intel-osf1
exit 0 ;;
i860:*:4.*:*) # i860-SVR4
if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
else # Add other i860-SVR4 vendors below as they are discovered.
echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
fi
exit 0 ;;
mini*:CTIX:SYS*5:*)
# "miniframe"
echo m68010-convergent-sysv
exit 0 ;;
M68*:*:R3V[567]*:*)
test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
OS_REL=''
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
&& echo i486-ncr-sysv4.3${OS_REL} && exit 0
/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
&& echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
&& echo i486-ncr-sysv4 && exit 0 ;;
m68*:LynxOS:2.*:*)
echo m68k-unknown-lynxos${UNAME_RELEASE}
exit 0 ;;
mc68030:UNIX_System_V:4.*:*)
echo m68k-atari-sysv4
exit 0 ;;
i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:*)
echo i386-unknown-lynxos${UNAME_RELEASE}
exit 0 ;;
TSUNAMI:LynxOS:2.*:*)
echo sparc-unknown-lynxos${UNAME_RELEASE}
exit 0 ;;
rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
echo rs6000-unknown-lynxos${UNAME_RELEASE}
exit 0 ;;
SM[BE]S:UNIX_SV:*:*)
echo mips-dde-sysv${UNAME_RELEASE}
exit 0 ;;
RM*:ReliantUNIX-*:*:*)
echo mips-sni-sysv4
exit 0 ;;
RM*:SINIX-*:*:*)
echo mips-sni-sysv4
exit 0 ;;
*:SINIX-*:*:*)
if uname -p 2>/dev/null >/dev/null ; then
UNAME_MACHINE=`(uname -p) 2>/dev/null`
echo ${UNAME_MACHINE}-sni-sysv4
else
echo ns32k-sni-sysv
fi
exit 0 ;;
PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
# says <Richard.M.Bartel@ccMail.Census.GOV>
echo i586-unisys-sysv4
exit 0 ;;
*:UNIX_System_V:4*:FTX*)
# From Gerald Hewes <hewes@openmarket.com>.
# How about differentiating between stratus architectures? -djm
echo hppa1.1-stratus-sysv4
exit 0 ;;
*:*:*:FTX*)
# From seanf@swdc.stratus.com.
echo i860-stratus-sysv4
exit 0 ;;
mc68*:A/UX:*:*)
echo m68k-apple-aux${UNAME_RELEASE}
exit 0 ;;
news*:NEWS-OS:*:6*)
echo mips-sony-newsos6
exit 0 ;;
R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
if [ -d /usr/nec ]; then
echo mips-nec-sysv${UNAME_RELEASE}
else
echo mips-unknown-sysv${UNAME_RELEASE}
fi
exit 0 ;;
BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
echo powerpc-be-beos
exit 0 ;;
BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
echo powerpc-apple-beos
exit 0 ;;
BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
echo i586-pc-beos
exit 0 ;;
SX-4:SUPER-UX:*:*)
echo sx4-nec-superux${UNAME_RELEASE}
exit 0 ;;
SX-5:SUPER-UX:*:*)
echo sx5-nec-superux${UNAME_RELEASE}
exit 0 ;;
Power*:Rhapsody:*:*)
echo powerpc-apple-rhapsody${UNAME_RELEASE}
exit 0 ;;
*:Rhapsody:*:*)
echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
exit 0 ;;
*:Darwin:*:* | *:"Mac OS":*:*)
echo `uname -p`-apple-darwin${UNAME_RELEASE}
exit 0 ;;
*:procnto*:*:* | *:QNX:[0123456789]*:*)
if test "${UNAME_MACHINE}" = "x86pc"; then
UNAME_MACHINE=pc
fi
echo `uname -p`-${UNAME_MACHINE}-nto-qnx
exit 0 ;;
*:QNX:*:4*)
echo i386-pc-qnx
exit 0 ;;
NSR-W:NONSTOP_KERNEL:*:*)
echo nsr-tandem-nsk${UNAME_RELEASE}
exit 0 ;;
BS2000:POSIX*:*:*)
echo bs2000-siemens-sysv
exit 0 ;;
DS/*:UNIX_System_V:*:*)
echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
exit 0 ;;
esac
#echo '(No uname command or uname output not recognized.)' 1>&2
#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
cat >$dummy.c <<EOF
#ifdef _SEQUENT_
# include <sys/types.h>
# include <sys/utsname.h>
#endif
main ()
{
#if defined (sony)
#if defined (MIPSEB)
/* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
I don't know.... */
printf ("mips-sony-bsd\n"); exit (0);
#else
#include <sys/param.h>
printf ("m68k-sony-newsos%s\n",
#ifdef NEWSOS4
"4"
#else
""
#endif
); exit (0);
#endif
#endif
#if defined (__arm) && defined (__acorn) && defined (__unix)
printf ("arm-acorn-riscix"); exit (0);
#endif
#if defined (hp300) && !defined (hpux)
printf ("m68k-hp-bsd\n"); exit (0);
#endif
#if defined (NeXT)
#if !defined (__ARCHITECTURE__)
#define __ARCHITECTURE__ "m68k"
#endif
int version;
version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
if (version < 4)
printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
else
printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
exit (0);
#endif
#if defined (MULTIMAX) || defined (n16)
#if defined (UMAXV)
printf ("ns32k-encore-sysv\n"); exit (0);
#else
#if defined (CMU)
printf ("ns32k-encore-mach\n"); exit (0);
#else
printf ("ns32k-encore-bsd\n"); exit (0);
#endif
#endif
#endif
#if defined (__386BSD__)
printf ("i386-pc-bsd\n"); exit (0);
#endif
#if defined (sequent)
#if defined (i386)
printf ("i386-sequent-dynix\n"); exit (0);
#endif
#if defined (ns32000)
printf ("ns32k-sequent-dynix\n"); exit (0);
#endif
#endif
#if defined (_SEQUENT_)
struct utsname un;
uname(&un);
if (strncmp(un.version, "V2", 2) == 0) {
printf ("i386-sequent-ptx2\n"); exit (0);
}
if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
printf ("i386-sequent-ptx1\n"); exit (0);
}
printf ("i386-sequent-ptx\n"); exit (0);
#endif
#if defined (vax)
#if !defined (ultrix)
printf ("vax-dec-bsd\n"); exit (0);
#else
printf ("vax-dec-ultrix\n"); exit (0);
#endif
#endif
#if defined (alliant) && defined (i860)
printf ("i860-alliant-bsd\n"); exit (0);
#endif
exit (1);
}
EOF
$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
# Apollos put the system type in the environment.
test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
# Convex versions that predate uname can use getsysinfo(1)
if [ -x /usr/convex/getsysinfo ]
then
case `getsysinfo -f cpu_type` in
c1*)
echo c1-convex-bsd
exit 0 ;;
c2*)
if getsysinfo -f scalar_acc
then echo c32-convex-bsd
else echo c2-convex-bsd
fi
exit 0 ;;
c34*)
echo c34-convex-bsd
exit 0 ;;
c38*)
echo c38-convex-bsd
exit 0 ;;
c4*)
echo c4-convex-bsd
exit 0 ;;
esac
fi
#echo '(Unable to guess system type)' 1>&2
exit 1
build/config.sub 0 → 100755
View file @ 6c343311
#! /bin/sh
# Configuration validation subroutine script, version 1.1.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
# Free Software Foundation, Inc.
#
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
# can handle that machine. It does not imply ALL GNU software can.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330,
# Boston, MA 02111-1307, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Written by Per Bothner <bothner@cygnus.com>.
# Please send patches to <config-patches@gnu.org>.
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
# If it is invalid, we print an error message on stderr and exit with code 1.
# Otherwise, we print the canonical config type on stdout and succeed.
# This file is supposed to be the same for all GNU packages
# and recognize all the CPU types, system types and aliases
# that are meaningful with *any* GNU software.
# Each package is responsible for reporting which valid configurations
# it does not support. The user should be able to distinguish
# a failure to support a valid configuration from a meaningless
# configuration.
# The goal of this file is to map all the various variations of a given
# machine specification into a single specification in the form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
# or in some cases, the newer four-part form:
# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
# It is wrong to echo any other type of specification.
if [ x$1 = x ]
then
echo Configuration name missing. 1>&2
echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
echo "or $0 ALIAS" 1>&2
echo where ALIAS is a recognized configuration type. 1>&2
exit 1
fi
# First pass through any local machine types.
case $1 in
*local*)
echo $1
exit 0
;;
*)
;;
esac
# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
# Here we must recognize all the valid KERNEL-OS combinations.
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
nto-qnx* | linux-gnu*)
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
*)
basic_machine=`echo $1 | sed 's/-[^-]*$//'`
if [ $basic_machine != $1 ]
then os=`echo $1 | sed 's/.*-/-/'`
else os=; fi
;;
esac
### Let's recognize common machines as not being operating systems so
### that things like config.sub decstation-3100 work. We also
### recognize some manufacturers as not being operating systems, so we
### can provide default operating systems below.
case $os in
-sun*os*)
# Prevent following clause from handling this invalid input.
;;
-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-apple)
os=
basic_machine=$1
;;
-sim | -cisco | -oki | -wec | -winbond)
os=
basic_machine=$1
;;
-scout)
;;
-wrs)
os=-vxworks
basic_machine=$1
;;
-hiux*)
os=-hiuxwe2
;;
-sco5)
os=-sco3.2v5
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco4)
os=-sco3.2v4
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco3.2.[4-9]*)
os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco3.2v[4-9]*)
# Don't forget version if it is 3.2v4 or newer.
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco*)
os=-sco3.2v2
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-udk*)
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-isc)
os=-isc2.2
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-clix*)
basic_machine=clipper-intergraph
;;
-isc*)
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-lynx*)
os=-lynxos
;;
-ptx*)
basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
;;
-windowsnt*)
os=`echo $os | sed -e 's/windowsnt/winnt/'`
;;
-psos*)
os=-psos
;;
-mint | -mint[0-9]*)
basic_machine=m68k-atari
os=-mint
;;
esac
# Decode aliases for certain CPU-COMPANY combinations.
case $basic_machine in
# Recognize the basic CPU types without company name.
# Some are omitted here because they have special meanings below.
tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
| arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \
| 580 | i960 | h8300 \
| x86 | ppcbe | mipsbe | mipsle | shbe | shle | armbe | armle \
| hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
| hppa64 \
| alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \
| alphaev6[78] \
| we32k | ns16k | clipper | i370 | sh | powerpc | powerpcle \
| 1750a | dsp16xx | pdp11 | mips16 | mips64 | mipsel | mips64el \
| mips64orion | mips64orionel | mipstx39 | mipstx39el \
| mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
| mips64vr5000 | miprs64vr5000el | mcore \
| sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \
| thumb | d10v | fr30 | avr)
basic_machine=$basic_machine-unknown
;;
m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65 | pj | pjl)
;;
# We use `pc' rather than `unknown'
# because (1) that's what they normally are, and
# (2) the word "unknown" tends to confuse beginning users.
i[34567]86)
basic_machine=$basic_machine-pc
;;
# Object if more than one company name word.
*-*-*)
echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
exit 1
;;
# Recognize the basic CPU types with company name.
# FIXME: clean up the formatting here.
vax-* | tahoe-* | i[34567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
| m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
| mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
| power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
| xmp-* | ymp-* \
| x86-* | ppcbe-* | mipsbe-* | mipsle-* | shbe-* | shle-* | armbe-* | armle-* \
| hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \
| hppa2.0n-* | hppa64-* \
| alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \
| alphaev6[78]-* \
| we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
| clipper-* | orion-* \
| sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
| sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \
| mips64el-* | mips64orion-* | mips64orionel-* \
| mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
| mipstx39-* | mipstx39el-* | mcore-* \
| f301-* | armv*-* | s390-* | sv1-* | t3e-* \
| m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
| thumb-* | v850-* | d30v-* | tic30-* | c30-* | fr30-* \
| bs2000-*)
;;
# Recognize the various machine names and aliases which stand
# for a CPU type and a company and sometimes even an OS.
386bsd)
basic_machine=i386-unknown
os=-bsd
;;
3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
basic_machine=m68000-att
;;
3b*)
basic_machine=we32k-att
;;
a29khif)
basic_machine=a29k-amd
os=-udi
;;
adobe68k)
basic_machine=m68010-adobe
os=-scout
;;
alliant | fx80)
basic_machine=fx80-alliant
;;
altos | altos3068)
basic_machine=m68k-altos
;;
am29k)
basic_machine=a29k-none
os=-bsd
;;
amdahl)
basic_machine=580-amdahl
os=-sysv
;;
amiga | amiga-*)
basic_machine=m68k-cbm
;;
amigaos | amigados)
basic_machine=m68k-cbm
os=-amigaos
;;
amigaunix | amix)
basic_machine=m68k-cbm
os=-sysv4
;;
apollo68)
basic_machine=m68k-apollo
os=-sysv
;;
apollo68bsd)
basic_machine=m68k-apollo
os=-bsd
;;
aux)
basic_machine=m68k-apple
os=-aux
;;
balance)
basic_machine=ns32k-sequent
os=-dynix
;;
convex-c1)
basic_machine=c1-convex
os=-bsd
;;
convex-c2)
basic_machine=c2-convex
os=-bsd
;;
convex-c32)
basic_machine=c32-convex
os=-bsd
;;
convex-c34)
basic_machine=c34-convex
os=-bsd
;;
convex-c38)
basic_machine=c38-convex
os=-bsd
;;
cray | ymp)
basic_machine=ymp-cray
os=-unicos
;;
cray2)
basic_machine=cray2-cray
os=-unicos
;;
[ctj]90-cray)
basic_machine=c90-cray
os=-unicos
;;
crds | unos)
basic_machine=m68k-crds
;;
da30 | da30-*)
basic_machine=m68k-da30
;;
decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
basic_machine=mips-dec
;;
delta | 3300 | motorola-3300 | motorola-delta \
| 3300-motorola | delta-motorola)
basic_machine=m68k-motorola
;;
delta88)
basic_machine=m88k-motorola
os=-sysv3
;;
dpx20 | dpx20-*)
basic_machine=rs6000-bull
os=-bosx
;;
dpx2* | dpx2*-bull)
basic_machine=m68k-bull
os=-sysv3
;;
ebmon29k)
basic_machine=a29k-amd
os=-ebmon
;;
elxsi)
basic_machine=elxsi-elxsi
os=-bsd
;;
encore | umax | mmax)
basic_machine=ns32k-encore
;;
es1800 | OSE68k | ose68k | ose | OSE)
basic_machine=m68k-ericsson
os=-ose
;;
fx2800)
basic_machine=i860-alliant
;;
genix)
basic_machine=ns32k-ns
;;
gmicro)
basic_machine=tron-gmicro
os=-sysv
;;
h3050r* | hiux*)
basic_machine=hppa1.1-hitachi
os=-hiuxwe2
;;
h8300hms)
basic_machine=h8300-hitachi
os=-hms
;;
h8300xray)
basic_machine=h8300-hitachi
os=-xray
;;
h8500hms)
basic_machine=h8500-hitachi
os=-hms
;;
harris)
basic_machine=m88k-harris
os=-sysv3
;;
hp300-*)
basic_machine=m68k-hp
;;
hp300bsd)
basic_machine=m68k-hp
os=-bsd
;;
hp300hpux)
basic_machine=m68k-hp
os=-hpux
;;
hp3k9[0-9][0-9] | hp9[0-9][0-9])
basic_machine=hppa1.0-hp
;;
hp9k2[0-9][0-9] | hp9k31[0-9])
basic_machine=m68000-hp
;;
hp9k3[2-9][0-9])
basic_machine=m68k-hp
;;
hp9k6[0-9][0-9] | hp6[0-9][0-9])
basic_machine=hppa1.0-hp
;;
hp9k7[0-79][0-9] | hp7[0-79][0-9])
basic_machine=hppa1.1-hp
;;
hp9k78[0-9] | hp78[0-9])
# FIXME: really hppa2.0-hp
basic_machine=hppa1.1-hp
;;
hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
# FIXME: really hppa2.0-hp
basic_machine=hppa1.1-hp
;;
hp9k8[0-9][13679] | hp8[0-9][13679])
basic_machine=hppa1.1-hp
;;
hp9k8[0-9][0-9] | hp8[0-9][0-9])
basic_machine=hppa1.0-hp
;;
hppa-next)
os=-nextstep3
;;
hppaosf)
basic_machine=hppa1.1-hp
os=-osf
;;
hppro)
basic_machine=hppa1.1-hp
os=-proelf
;;
i370-ibm* | ibm*)
basic_machine=i370-ibm
;;
# I'm not sure what "Sysv32" means. Should this be sysv3.2?
i[34567]86v32)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv32
;;
i[34567]86v4*)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv4
;;
i[34567]86v)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv
;;
i[34567]86sol2)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-solaris2
;;
i386mach)
basic_machine=i386-mach
os=-mach
;;
i386-vsta | vsta)
basic_machine=i386-unknown
os=-vsta
;;
i386-go32 | go32)
basic_machine=i386-unknown
os=-go32
;;
i386-mingw32 | mingw32)
basic_machine=i386-unknown
os=-mingw32
;;
iris | iris4d)
basic_machine=mips-sgi
case $os in
-irix*)
;;
*)
os=-irix4
;;
esac
;;
isi68 | isi)
basic_machine=m68k-isi
os=-sysv
;;
m88k-omron*)
basic_machine=m88k-omron
;;
magnum | m3230)
basic_machine=mips-mips
os=-sysv
;;
merlin)
basic_machine=ns32k-utek
os=-sysv
;;
miniframe)
basic_machine=m68000-convergent
;;
*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
basic_machine=m68k-atari
os=-mint
;;
mipsel*-linux*)
basic_machine=mipsel-unknown
os=-linux-gnu
;;
mips*-linux*)
basic_machine=mips-unknown
os=-linux-gnu
;;
mips3*-*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
;;
mips3*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
;;
mmix*)
basic_machine=mmix-knuth
os=-mmixware
;;
monitor)
basic_machine=m68k-rom68k
os=-coff
;;
msdos)
basic_machine=i386-unknown
os=-msdos
;;
mvs)
basic_machine=i370-ibm
os=-mvs
;;
ncr3000)
basic_machine=i486-ncr
os=-sysv4
;;
netbsd386)
basic_machine=i386-unknown
os=-netbsd
;;
netwinder)
basic_machine=armv4l-rebel
os=-linux
;;
news | news700 | news800 | news900)
basic_machine=m68k-sony
os=-newsos
;;
news1000)
basic_machine=m68030-sony
os=-newsos
;;
news-3600 | risc-news)
basic_machine=mips-sony
os=-newsos
;;
necv70)
basic_machine=v70-nec
os=-sysv
;;
next | m*-next )
basic_machine=m68k-next
case $os in
-nextstep* )
;;
-ns2*)
os=-nextstep2
;;
*)
os=-nextstep3
;;
esac
;;
nh3000)
basic_machine=m68k-harris
os=-cxux
;;
nh[45]000)
basic_machine=m88k-harris
os=-cxux
;;
nindy960)
basic_machine=i960-intel
os=-nindy
;;
mon960)
basic_machine=i960-intel
os=-mon960
;;
np1)
basic_machine=np1-gould
;;
nsr-tandem)
basic_machine=nsr-tandem
;;
op50n-* | op60c-*)
basic_machine=hppa1.1-oki
os=-proelf
;;
OSE68000 | ose68000)
basic_machine=m68000-ericsson
os=-ose
;;
os68k)
basic_machine=m68k-none
os=-os68k
;;
pa-hitachi)
basic_machine=hppa1.1-hitachi
os=-hiuxwe2
;;
paragon)
basic_machine=i860-intel
os=-osf
;;
pbd)
basic_machine=sparc-tti
;;
pbb)
basic_machine=m68k-tti
;;
pc532 | pc532-*)
basic_machine=ns32k-pc532
;;
pentium | p5 | k5 | k6 | nexen)
basic_machine=i586-pc
;;
pentiumpro | p6 | 6x86)
basic_machine=i686-pc
;;
pentiumii | pentium2)
basic_machine=i786-pc
;;
pentium-* | p5-* | k5-* | k6-* | nexen-*)
basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pentiumpro-* | p6-* | 6x86-*)
basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pentiumii-* | pentium2-*)
basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pn)
basic_machine=pn-gould
;;
power) basic_machine=rs6000-ibm
;;
ppc) basic_machine=powerpc-unknown
;;
ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppcle | powerpclittle | ppc-le | powerpc-little)
basic_machine=powerpcle-unknown
;;
ppcle-* | powerpclittle-*)
basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ps2)
basic_machine=i386-ibm
;;
rom68k)
basic_machine=m68k-rom68k
os=-coff
;;
rm[46]00)
basic_machine=mips-siemens
;;
rtpc | rtpc-*)
basic_machine=romp-ibm
;;
sa29200)
basic_machine=a29k-amd
os=-udi
;;
sequent)
basic_machine=i386-sequent
;;
sh)
basic_machine=sh-hitachi
os=-hms
;;
sparclite-wrs)
basic_machine=sparclite-wrs
os=-vxworks
;;
sps7)
basic_machine=m68k-bull
os=-sysv2
;;
spur)
basic_machine=spur-unknown
;;
st2000)
basic_machine=m68k-tandem
;;
stratus)
basic_machine=i860-stratus
os=-sysv4
;;
sun2)
basic_machine=m68000-sun
;;
sun2os3)
basic_machine=m68000-sun
os=-sunos3
;;
sun2os4)
basic_machine=m68000-sun
os=-sunos4
;;
sun3os3)
basic_machine=m68k-sun
os=-sunos3
;;
sun3os4)
basic_machine=m68k-sun
os=-sunos4
;;
sun4os3)
basic_machine=sparc-sun
os=-sunos3
;;
sun4os4)
basic_machine=sparc-sun
os=-sunos4
;;
sun4sol2)
basic_machine=sparc-sun
os=-solaris2
;;
sun3 | sun3-*)
basic_machine=m68k-sun
;;
sun4)
basic_machine=sparc-sun
;;
sun386 | sun386i | roadrunner)
basic_machine=i386-sun
;;
sv1)
basic_machine=sv1-cray
os=-unicos
;;
symmetry)
basic_machine=i386-sequent
os=-dynix
;;
t3e)
basic_machine=t3e-cray
os=-unicos
;;
tx39)
basic_machine=mipstx39-unknown
;;
tx39el)
basic_machine=mipstx39el-unknown
;;
tower | tower-32)
basic_machine=m68k-ncr
;;
udi29k)
basic_machine=a29k-amd
os=-udi
;;
ultra3)
basic_machine=a29k-nyu
os=-sym1
;;
v810 | necv810)
basic_machine=v810-nec
os=-none
;;
vaxv)
basic_machine=vax-dec
os=-sysv
;;
vms)
basic_machine=vax-dec
os=-vms
;;
vpp*|vx|vx-*)
basic_machine=f301-fujitsu
;;
vxworks960)
basic_machine=i960-wrs
os=-vxworks
;;
vxworks68)
basic_machine=m68k-wrs
os=-vxworks
;;
vxworks29k)
basic_machine=a29k-wrs
os=-vxworks
;;
w65*)
basic_machine=w65-wdc
os=-none
;;
w89k-*)
basic_machine=hppa1.1-winbond
os=-proelf
;;
xmp)
basic_machine=xmp-cray
os=-unicos
;;
xps | xps100)
basic_machine=xps100-honeywell
;;
z8k-*-coff)
basic_machine=z8k-unknown
os=-sim
;;
none)
basic_machine=none-none
os=-none
;;
# Here we handle the default manufacturer of certain CPU types. It is in
# some cases the only manufacturer, in others, it is the most popular.
w89k)
basic_machine=hppa1.1-winbond
;;
op50n)
basic_machine=hppa1.1-oki
;;
op60c)
basic_machine=hppa1.1-oki
;;
mips)
if [ x$os = x-linux-gnu ]; then
basic_machine=mips-unknown
else
basic_machine=mips-mips
fi
;;
romp)
basic_machine=romp-ibm
;;
rs6000)
basic_machine=rs6000-ibm
;;
vax)
basic_machine=vax-dec
;;
pdp11)
basic_machine=pdp11-dec
;;
we32k)
basic_machine=we32k-att
;;
sparc | sparcv9)
basic_machine=sparc-sun
;;
cydra)
basic_machine=cydra-cydrome
;;
orion)
basic_machine=orion-highlevel
;;
orion105)
basic_machine=clipper-highlevel
;;
mac | mpw | mac-mpw)
basic_machine=m68k-apple
;;
pmac | pmac-mpw)
basic_machine=powerpc-apple
;;
c4x*)
basic_machine=c4x-none
os=-coff
;;
*)
echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
exit 1
;;
esac
# Here we canonicalize certain aliases for manufacturers.
case $basic_machine in
*-digital*)
basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
;;
*-commodore*)
basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
;;
*)
;;
esac
# Decode manufacturer-specific aliases for certain operating systems.
if [ x"$os" != x"" ]
then
case $os in
# First match some system type aliases
# that might get confused with valid system types.
# -solaris* is a basic system type, with this one exception.
-solaris1 | -solaris1.*)
os=`echo $os | sed -e 's|solaris1|sunos4|'`
;;
-solaris)
os=-solaris2
;;
-svr4*)
os=-sysv4
;;
-unixware*)
os=-sysv4.2uw
;;
-gnu/linux*)
os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
;;
# First accept the basic system types.
# The portable systems comes first.
# Each alternative MUST END IN A *, to match a version number.
# -sysv* is not here because it comes later, after sysvr4.
-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
| -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
| -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
| -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
| -aos* \
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
| -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
| -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
| -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
| -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
| -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
| -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
| -openstep* | -oskit*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
case $basic_machine in
x86-* | i[34567]86-*)
;;
*)
os=-nto$os
;;
esac
;;
-nto*)
os=-nto-qnx
;;
-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
| -windows* | -osx | -abug | -netware* | -os9* | -beos* \
| -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
;;
-mac*)
os=`echo $os | sed -e 's|mac|macos|'`
;;
-linux*)
os=`echo $os | sed -e 's|linux|linux-gnu|'`
;;
-sunos5*)
os=`echo $os | sed -e 's|sunos5|solaris2|'`
;;
-sunos6*)
os=`echo $os | sed -e 's|sunos6|solaris3|'`
;;
-opened*)
os=-openedition
;;
-wince*)
os=-wince
;;
-osfrose*)
os=-osfrose
;;
-osf*)
os=-osf
;;
-utek*)
os=-bsd
;;
-dynix*)
os=-bsd
;;
-acis*)
os=-aos
;;
-386bsd)
os=-bsd
;;
-ctix* | -uts*)
os=-sysv
;;
-ns2 )
os=-nextstep2
;;
-nsk)
os=-nsk
;;
# Preserve the version number of sinix5.
-sinix5.*)
os=`echo $os | sed -e 's|sinix|sysv|'`
;;
-sinix*)
os=-sysv4
;;
-triton*)
os=-sysv3
;;
-oss*)
os=-sysv3
;;
-svr4)
os=-sysv4
;;
-svr3)
os=-sysv3
;;
-sysvr4)
os=-sysv4
;;
# This must come after -sysvr4.
-sysv*)
;;
-ose*)
os=-ose
;;
-es1800*)
os=-ose
;;
-xenix)
os=-xenix
;;
-*mint | -*MiNT)
os=-mint
;;
-none)
;;
*)
# Get rid of the `-' at the beginning of $os.
os=`echo $os | sed 's/[^-]*-//'`
echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
exit 1
;;
esac
else
# Here we handle the default operating systems that come with various machines.
# The value should be what the vendor currently ships out the door with their
# machine or put another way, the most popular os provided with the machine.
# Note that if you're going to try to match "-MANUFACTURER" here (say,
# "-sun"), then you have to tell the case statement up towards the top
# that MANUFACTURER isn't an operating system. Otherwise, code above
# will signal an error saying that MANUFACTURER isn't an operating
# system, and we'll never get to this point.
case $basic_machine in
*-acorn)
os=-riscix1.2
;;
arm*-rebel)
os=-linux
;;
arm*-semi)
os=-aout
;;
pdp11-*)
os=-none
;;
*-dec | vax-*)
os=-ultrix4.2
;;
m68*-apollo)
os=-domain
;;
i386-sun)
os=-sunos4.0.2
;;
m68000-sun)
os=-sunos3
# This also exists in the configure program, but was not the
# default.
# os=-sunos4
;;
m68*-cisco)
os=-aout
;;
mips*-cisco)
os=-elf
;;
mips*-*)
os=-elf
;;
*-tti) # must be before sparc entry or we get the wrong os.
os=-sysv3
;;
sparc-* | *-sun)
os=-sunos4.1.1
;;
*-be)
os=-beos
;;
*-ibm)
os=-aix
;;
*-wec)
os=-proelf
;;
*-winbond)
os=-proelf
;;
*-oki)
os=-proelf
;;
*-hp)
os=-hpux
;;
*-hitachi)
os=-hiux
;;
i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
os=-sysv
;;
*-cbm)
os=-amigaos
;;
*-dg)
os=-dgux
;;
*-dolphin)
os=-sysv3
;;
m68k-ccur)
os=-rtu
;;
m88k-omron*)
os=-luna
;;
*-next )
os=-nextstep
;;
*-sequent)
os=-ptx
;;
*-crds)
os=-unos
;;
*-ns)
os=-genix
;;
i370-*)
os=-mvs
;;
*-next)
os=-nextstep3
;;
*-gould)
os=-sysv
;;
*-highlevel)
os=-bsd
;;
*-encore)
os=-bsd
;;
*-sgi)
os=-irix
;;
*-siemens)
os=-sysv4
;;
*-masscomp)
os=-rtu
;;
f301-fujitsu)
os=-uxpv
;;
*-rom68k)
os=-coff
;;
*-*bug)
os=-coff
;;
*-apple)
os=-macos
;;
*-atari*)
os=-mint
;;
*)
os=-none
;;
esac
fi
# Here we handle the case where we know the os, and the CPU type, but not the
# manufacturer. We pick the logical manufacturer.
vendor=unknown
case $basic_machine in
*-unknown)
case $os in
-riscix*)
vendor=acorn
;;
-sunos*)
vendor=sun
;;
-aix*)
vendor=ibm
;;
-beos*)
vendor=be
;;
-hpux*)
vendor=hp
;;
-mpeix*)
vendor=hp
;;
-hiux*)
vendor=hitachi
;;
-unos*)
vendor=crds
;;
-dgux*)
vendor=dg
;;
-luna*)
vendor=omron
;;
-genix*)
vendor=ns
;;
-mvs* | -opened*)
vendor=ibm
;;
-ptx*)
vendor=sequent
;;
-vxsim* | -vxworks*)
vendor=wrs
;;
-aux*)
vendor=apple
;;
-hms*)
vendor=hitachi
;;
-mpw* | -macos*)
vendor=apple
;;
-*mint | -*MiNT)
vendor=atari
;;
esac
basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
;;
esac
echo $basic_machine$os
build/dir.mk 0 → 100644
View file @ 6c343311
# $OpenLDAP$
## Copyright 1998-2000 The OpenLDAP Foundation
## COPYING RESTRICTIONS APPLY. See COPYRIGHT File in top level directory
## of this package for details.
##---------------------------------------------------------------------------
##
## Makes subdirectories
##
all-common: FORCE
@echo "Making all in `$(PWD)`"
@for i in $(SUBDIRS) $(ALLDIRS); do \
echo " Entering subdirectory $$i"; \
( cd $$i; $(MAKE) $(MFLAGS) all ); \
if test $$? != 0 ; then exit 1; fi ; \
echo " "; \
done
install-common: FORCE
@echo "Making install in `$(PWD)`"
@for i in $(SUBDIRS) $(INSTALLDIRS); do \
echo " Entering subdirectory $$i"; \
( cd $$i; $(MAKE) $(MFLAGS) install ); \
if test $$? != 0 ; then exit 1; fi ; \
echo " "; \
done
clean-common: FORCE
@echo "Making clean in `$(PWD)`"
@for i in $(SUBDIRS) $(CLEANDIRS); do \
echo " Entering subdirectory $$i"; \
( cd $$i; $(MAKE) $(MFLAGS) clean ); \
if test $$? != 0 ; then exit 1; fi ; \
echo " "; \
done
veryclean-common: FORCE
@echo "Making veryclean in `$(PWD)`"
@for i in $(SUBDIRS) $(CLEANDIRS); do \
echo " Entering subdirectory $$i"; \
( cd $$i; $(MAKE) $(MFLAGS) veryclean ); \
if test $$? != 0 ; then exit 1; fi ; \
echo " "; \
done
depend-common: FORCE
@echo "Making depend in `$(PWD)`"
@for i in $(SUBDIRS) $(DEPENDDIRS); do \
echo " Entering subdirectory $$i"; \
( cd $$i; $(MAKE) $(MFLAGS) depend ); \
if test $$? != 0 ; then exit 1; fi ; \
echo " "; \
done
Makefile: $(top_srcdir)/build/dir.mk
build/info.mk 0 → 100644
View file @ 6c343311
# $OpenLDAP$
## Copyright 1998-2000 The OpenLDAP Foundation
## COPYING RESTRICTIONS APPLY. See COPYRIGHT File in top level directory
## of this package for details.
##---------------------------------------------------------------------------
##
## Makefile Template for Non-Source Directories
##
Makefile: $(top_srcdir)/build/info.mk
build/install-sh 0 → 100755
View file @ 6c343311
#! /bin/sh
# $OpenLDAP$
## Copyright 1998-2000 The OpenLDAP Foundation
## COPYING RESTRICTIONS APPLY. See COPYRIGHT File in top level directory
## of this package for details.
#
# install - install a program, script, or datafile
# This comes from X11R5 (mit/util/scripts/install.sh).
#
# Copyright 1991 by the Massachusetts Institute of Technology
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of M.I.T. not be used in advertising or
# publicity pertaining to distribution of the software without specific,
# written prior permission. M.I.T. makes no representations about the
# suitability of this software for any purpose. It is provided "as is"
# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""
while [ x"$1" != x ]; do
case $1 in
-c) instcmd="$cpprog"
shift
continue;;
-d) dir_arg=true
shift
continue;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
-s) stripcmd="$stripprog"
shift
continue;;
-t=*) transformarg=`echo $1 | sed 's/-t=//'`
shift
continue;;
-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
shift
continue;;
*) if [ x"$src" = x ]
then
src=$1
else
# this colon is to work around a 386BSD /bin/sh bug
:
dst=$1
fi
shift
continue;;
esac
done
if [ x"$src" = x ]
then
echo "install: no input file specified"
exit 1
else
true
fi
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
if [ -d $dst ]; then
instcmd=:
chmodcmd=""
else
instcmd=$mkdirprog
fi
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if [ -f $src -o -d $src ]
then
true
else
echo "install: $src does not exist"
exit 1
fi
if [ x"$dst" = x ]
then
echo "install: no destination specified"
exit 1
else
true
fi
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
if [ -d $dst ]
then
dst="$dst"/`basename $src`
else
true
fi
fi
## this sed command emulates the dirname command
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-${defaultIFS}}"
oIFS="${IFS}"
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS="${oIFS}"
pathcomp=''
while [ $# -ne 0 ] ; do
pathcomp="${pathcomp}${1}"
shift
if [ ! -d "${pathcomp}" ] ;
then
$mkdirprog "${pathcomp}"
else
true
fi
pathcomp="${pathcomp}/"
done
fi
if [ x"$dir_arg" != x ]
then
$doit $instcmd $dst &&
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
else
# If we're going to rename the final executable, determine the name now.
if [ x"$transformarg" = x ]
then
dstfile=`basename $dst`
else
dstfile=`basename $dst $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
if [ x"$dstfile" = x ]
then
dstfile=`basename $dst`
else
true
fi
# Make a temp file name in the proper directory.
dsttmp=$dstdir/#inst.$$#
# Move or copy the file name to the temp name
$doit $instcmd $src $dsttmp &&
trap "rm -f ${dsttmp}" 0 &&
# and set any options; do chmod last to preserve setuid bits
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
# Now rename the file to the real destination.
$doit $rmcmd -f $dstdir/$dstfile &&
$doit $mvcmd $dsttmp $dstdir/$dstfile
fi &&
exit 0
build/lib-shared.mk 0 → 100644
View file @ 6c343311
# $OpenLDAP$
## Copyright 1998-2000 The OpenLDAP Foundation
## COPYING RESTRICTIONS APPLY. See COPYRIGHT File in top level directory
## of this package for details.
##---------------------------------------------------------------------------
##
## Makefile Template for Shared Libraries
##
NT_LTFLAGS = --only-$(LINKAGE)
LTFLAGS = $(@PLAT@_LTFLAGS)
NT_DYN_LT_NO_UNDEF = -no-undefined
LT_NO_UNDEF = $(@PLAT@_@LIB_LINKAGE@_LT_NO_UNDEF)
COMPILE = $(LIBTOOL) $(LTFLAGS) --mode=compile $(CC) $(CFLAGS) $(EXTRA_DEFS) -c
LTLIBLINK = $(LIBTOOL) $(LTFLAGS) --mode=link $(CC) -rpath $(libdir) \
$(CFLAGS) $(LDFLAGS) $(LTVERSION) $(LT_NO_UNDEF)
MKDEPFLAG = -l
.SUFFIXES: .c .o .lo
.c.lo:
$(COMPILE) $<
# DYN_EXT (@DYN_EXT@) describes the extension assoicated with a
# dynamic library, e.g. so, dll
DYN_EXT=@DYN_EXT@
$(LIBRARY): version.lo
$(LTLIBLINK) -o $@ $(OBJS) version.lo $(EXTRA_LIBS)
$(RM) ../$@
d=`$(PWD)`; d=`$(BASENAME) $$d`; cd ..; $(LN_S) $$d/$@ $@; \
t=`$(BASENAME) $@ .la`.a; $(RM) $$t; $(LN_S) $$d/.libs/$$t $$t
if test "$(LINK_BINS_DYNAMIC)" = "yes"; then \
d=`$(PWD)`; d=`$(BASENAME) $$d`; b=`$(BASENAME) $@ .la`; \
cd .libs; t=`echo $$b*.$(DYN_EXT)`; (cd ../.. ; $(RM) $$t; \
$(LN_S) $$d/.libs/$$t $$t); \
if test "$(DYN_EXT)" != dll; then \
t=`echo $$b.$(DYN_EXT).?`; cd ../.. ; \
$(RM) $$t; \
$(LN_S) $$d/.libs/$$t $$t; \
fi \
fi
Makefile: $(top_srcdir)/build/lib-shared.mk
build/lib-static.mk 0 → 100644
View file @ 6c343311
# $OpenLDAP$
## Copyright 1998-2000 The OpenLDAP Foundation
## COPYING RESTRICTIONS APPLY. See COPYRIGHT File in top level directory
## of this package for details.
##---------------------------------------------------------------------------
##
## Makefile Template for Static Libraries
##
$(LIBRARY): version.o
$(AR) ru $@ $(OBJS) version.o
@$(RANLIB) $@; \
$(RM) ../$@; \
(d=`$(PWD)` ; cd .. ; $(LN_S) `$(BASENAME) $$d`/$@ $@)
Makefile: $(top_srcdir)/build/lib-static.mk
build/lib.mk 0 → 100644
View file @ 6c343311
# $OpenLDAP$
## Copyright 1998-2000 The OpenLDAP Foundation
## COPYING RESTRICTIONS APPLY. See COPYRIGHT File in top level directory
## of this package for details.
##---------------------------------------------------------------------------
##
## Makefile Template for Libraries
##
all-common: $(LIBRARY) $(PROGRAMS)
version.c: $(OBJS)
$(RM) $@
$(MKVERSION) $(LIBRARY) > $@
install-common: FORCE
lint: lint-local FORCE
$(LINT) $(DEFS) $(DEFINES) $(SRCS)
lint5: lint5-local FORCE
$(5LINT) $(DEFS) $(DEFINES) $(SRCS)
clean-common: FORCE
$(RM) $(LIBRARY) ../$(LIBRARY) $(XLIBRARY) \
$(PROGRAMS) $(XPROGRAMS) $(XSRCS) $(XXSRCS) \
*.o *.lo a.out *.exe core version.c .libs/* \
../`$(BASENAME) $(LIBRARY) .la`{.a,.so*,*.dll}
depend-common: FORCE
$(MKDEP) $(DEFS) $(DEFINES) $(SRCS) $(XXSRCS)
lint-local: FORCE
lint5-local: FORCE
Makefile: $(top_srcdir)/build/lib.mk