build/missing

 #! /bin/sh
-# $OpenLDAP$
-# This file is distributed with OpenLDAP Software but is an an 
-# independently licensed program.
-
 # Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997 Free Software Foundation, Inc.
-# Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+#   Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -19,15 +17,62 @@
 
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is distributed with OpenLDAP Software, which contains a
+# configuration script generated by Autoconf, and is distributable
+# under the same distributions terms as OpenLDAP itself.
+
+## Copyright 1998-2006 The OpenLDAP Foundation.
+## All rights reserved.
+##
+## Redistribution and use in source and binary forms, with or without
+## modification, are permitted only as authorized by the OpenLDAP
+## Public License.
+##
+## A copy of this license is available in the file LICENSE in the
+## top-level directory of the distribution or, alternatively, at
+##
 
 if test $# -eq 0; then
   echo 1>&2 "Try \`$0 --help' for more information"
   exit 1
 fi
 
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
 case "$1" in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
+  ;;
 
   -h|--h|--he|--hel|--help)
     echo "\
@@ -39,6 +84,7 @@ error status if there is no known handling for PROGRAM.
 Options:
   -h, --help      display this help and exit
   -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
 
 Supported PROGRAM values:
   aclocal      touch file \`aclocal.m4'
@@ -47,13 +93,19 @@ Supported PROGRAM values:
   automake     touch all \`Makefile.in' files
   bison        create \`y.tab.[ch]', if possible, from existing .[ch]
   flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
   lex          create \`lex.yy.c', if possible, from existing .c
   makeinfo     touch the output file
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
     ;;
 
   -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing - GNU libit 0.0"
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
     ;;
 
   -*)
@@ -62,29 +114,66 @@ Supported PROGRAM values:
     exit 1
     ;;
 
-  aclocal)
+esac
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case "$1" in
+  lex|yacc)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  tar)
+    if test -n "$run"; then
+       echo 1>&2 "ERROR: \`tar' requires --run"
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       exit 1
+    fi
+    ;;
+
+  *)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
+    fi
+    ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+  aclocal*)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acinclude.m4' or \`configure.in'.  You might want
-         to install the \`Automake' and \`Perl' packages. See build/README."
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
     touch aclocal.m4
     ;;
 
   autoconf)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`configure.in'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  See build/README."
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
     touch configure
     ;;
 
   autoheader)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acconfig.h' or \`configure.in'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  See
-         build/README."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' configure.in`
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
     test -z "$files" && files="config.h"
     touch_files=
     for f in $files; do
@@ -97,10 +186,10 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     touch $touch_files
     ;;
 
-  automake)
+  automake*)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
          You might want to install the \`Automake' and \`Perl' packages.
          Grab them from any GNU archive site."
     find . -type f -name Makefile.am -print |
@@ -108,9 +197,32 @@ WARNING: \`$1' is missing on your system.  You should only need it if
 	   while read f; do touch "$f"; done
     ;;
 
+  autom4te)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
   bison|yacc)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' $msg.  You should only need it if
          you modified a \`.y' file.  You may need the \`Bison' package
          in order for those modifications to take effect.  You can get
          \`Bison' from any GNU archive site."
@@ -140,7 +252,7 @@ WARNING: \`$1' is missing on your system.  You should only need it if
 
   lex|flex)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.l' file.  You may need the \`Flex' package
          in order for those modifications to take effect.  You can get
          \`Flex' from any GNU archive site."
@@ -161,33 +273,101 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     fi
     ;;
 
+  help2man)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    fi
+    if [ -f "$file" ]; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit 1
+    fi
+    ;;
+
   makeinfo)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.texi' or \`.texinfo' file, or any other file
          indirectly affecting the aspect of the manual.  The spurious
          call might also be the consequence of using a buggy \`make' (AIX,
          DU, IRIX).  You might want to install the \`Texinfo' package or
          the \`GNU make' package.  Grab either from any GNU archive site."
+    # The file to touch is that specified with -o ...
     file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
     if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
     fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
     touch $file
     ;;
 
+  tar)
+    shift
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case "$firstarg" in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+	case "$firstarg" in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
   *)
     echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
-         system.  You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file
-         or build/README file, they often tells you about the needed
-         prerequirements for installing this package.  You may also peek
-         at any GNU archive site, in case some other package would contain
-         this missing \`$1' program."
+WARNING: \`$1' is needed, and is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequisites for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
     exit 1
     ;;
 esac
 
 exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

build/mkdep

@@ -2,7 +2,7 @@
 # $OpenLDAP$
 ## This work is part of OpenLDAP Software <http://www.openldap.org/>.
 ##
-## Copyright 1998-2004 The OpenLDAP Foundation.
+## Copyright 1998-2006 The OpenLDAP Foundation.
 ## All rights reserved.
 ##
 ## Redistribution and use in source and binary forms, with or without
@@ -161,7 +161,7 @@ for i in $files; do
 	esac
 done
 for i in $FILES; do
-	$MKDEP_CC $MKDEP_CFLAGS $FLAGS $i | egrep '^#.*"' > $TMP.sed
+	$MKDEP_CC $MKDEP_CFLAGS $FLAGS $i | grep '^#.*"' > $TMP.sed
 awk '
 BEGIN {
 	file = "'$i'"

build/mkdep.aix

 #! /bin/sh
 ## This work is part of OpenLDAP Software <http://www.openldap.org/>.
 ##
-## Copyright 1998-2004 The OpenLDAP Foundation.
+## Copyright 1998-2006 The OpenLDAP Foundation.
 ## All rights reserved.
 ##
 ## Redistribution and use in source and binary forms, with or without

build/mkrelease

@@ -2,7 +2,7 @@
 # $OpenLDAP$
 ## This work is part of OpenLDAP Software <http://www.openldap.org/>.
 ##
-## Copyright 1998-2004 The OpenLDAP Foundation.
+## Copyright 1998-2006 The OpenLDAP Foundation.
 ## All rights reserved.
 ##
 ## Redistribution and use in source and binary forms, with or without
@@ -44,23 +44,34 @@ echo Release: $RELNAME
 echo CVS Tag: $CVSTAG
 echo Modules: $*
 
-cvs -q export -r $CVSTAG -d $RELNAME $*
+cvs -q export -kkv -r $CVSTAG -d $RELNAME $*
 
 if test ! -d $RELNAME ; then
 	echo "error: $RELNAME doesn't exists"
 	exit 1
 fi
 
+if test -e $RELNAME/doc/guide/admin/guide.sdf ; then
+	echo "build guide..."
+	( cd $RELNAME/doc/guide/admin ; make guide.html )
+else
+	echo "No guide"
+fi
+
 if test ! -e $RELNAME/build/version.sh ; then
 	echo "No build version"
-	exit 1
+	OL_STRING="something"
+else
+	eval `$RELNAME/build/version.sh`
 fi
 
-eval `$RELNAME/build/version.sh`
+echo "Rolling up $OL_STRING ..."
+
 
 tar cf $RELNAME.tar $RELNAME
 gzip -9 -c $RELNAME.tar > $RELNAME.tgz
 md5 $RELNAME.tgz > $RELNAME.md5
+sha1 $RELNAME.tgz > $RELNAME.sha1
 rm -f $RELNAME.tar
 
 ls -l $RELNAME.*

build/mkvers.bat

 :: $OpenLDAP$
 :: This work is part of OpenLDAP Software <http://www.openldap.org/>.
 ::
-:: Copyright 1998-2004 The OpenLDAP Foundation.
+:: Copyright 1998-2006 The OpenLDAP Foundation.
 :: All rights reserved.
 ::
 :: Redistribution and use in source and binary forms, with or without

build/mkversion

@@ -3,7 +3,7 @@
 # $OpenLDAP$
 ## This work is part of OpenLDAP Software <http://www.openldap.org/>.
 ##
-## Copyright 1998-2004 The OpenLDAP Foundation.
+## Copyright 1998-2006 The OpenLDAP Foundation.
 ## All rights reserved.
 ##
 ## Redistribution and use in source and binary forms, with or without
@@ -55,7 +55,7 @@ WHOWHERE="$USER@`uname -n`:`pwd`"
 cat << __EOF__
 /* This work is part of OpenLDAP Software <http://www.openldap.org/>.
  *
- * Copyright 1998-2004 The OpenLDAP Foundation.
+ * Copyright 1998-2006 The OpenLDAP Foundation.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -68,7 +68,7 @@ cat << __EOF__
  */
 
 static const char copyright[] =
-"Copyright 1998-2004 The OpenLDAP Foundation.  All rights reserved.\n"
+"Copyright 1998-2006 The OpenLDAP Foundation.  All rights reserved.\n"
 "COPYING RESTRICTIONS APPLY\n";
 
 $static $const char $SYMBOL[] =

build/mod.mk

 # $OpenLDAP$
-## Copyright 1998-2004 The OpenLDAP Foundation.
+## This work is part of OpenLDAP Software <http://www.openldap.org/>.
+##
+## Copyright 1998-2006 The OpenLDAP Foundation.
 ## All rights reserved.
 ##
 ## Redistribution and use in source and binary forms, with or without

build/rules.mk

 # $OpenLDAP$
-## Copyright 1998-2004 The OpenLDAP Foundation.
+## This work is part of OpenLDAP Software <http://www.openldap.org/>.
+##
+## Copyright 1998-2006 The OpenLDAP Foundation.
 ## All rights reserved.
 ##
 ## Redistribution and use in source and binary forms, with or without

build/shtool

 #!/bin/sh
 ##
 ##  GNU shtool -- The GNU Portable Shell Tool
-##  Copyright (c) 1994-2004 Ralf S. Engelschall <rse@engelschall.com>
+##  Copyright (c) 1994-2006 Ralf S. Engelschall <rse@engelschall.com>
 ##
 ##  See http://www.gnu.org/software/shtool/ for more information.
 ##  See ftp://ftp.gnu.org/gnu/shtool/ for latest version.
 ##
-##  Version:  2.0.1 (11-Aug-2004)
+##  Version:  2.0.5 (07-Feb-2006)
 ##  Contents: 6/19 available modules
 ##
 
@@ -61,17 +61,42 @@
 ##    path       Deal with program paths
 ##
 
+#   maximum Bourne-Shell compatibility
+if [ ".$ZSH_VERSION" != . ] && (emulate sh) >/dev/null 2>&1; then
+    #   reconfigure zsh(1)
+    emulate sh
+    NULLCMD=:
+    alias -g '${1+"$@"}'='"$@"'
+elif [ ".$BASH_VERSION" != . ] && (set -o posix) >/dev/null 2>&1; then
+    #   reconfigure bash(1)
+    set -o posix
+fi
+
+#   maximum independence of NLS nuisances
+for var in \
+    LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+    LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+    LC_TELEPHONE LC_TIME
+do
+    if (set +x; test -z "`(eval $var=C; export $var) 2>&1`"); then
+        eval $var=C; export $var
+    else
+        unset $var
+    fi
+done
+
+#   initial command line handling
 if [ $# -eq 0 ]; then
     echo "$0:Error: invalid command line" 1>&2
     echo "$0:Hint:  run \`$0 -h' for usage" 1>&2
     exit 1
 fi
 if [ ".$1" = ".-h" ] || [ ".$1" = ".--help" ]; then
-    echo "This is GNU shtool, version 2.0.1 (11-Aug-2004)"
-    echo "Copyright (c) 1994-2004 Ralf S. Engelschall <rse@engelschall.com>"
-    echo "Report bugs to <bug-shtool@gnu.org>"
+    echo "This is GNU shtool, version 2.0.5 (07-Feb-2006)"
+    echo 'Copyright (c) 1994-2006 Ralf S. Engelschall <rse@engelschall.com>'
+    echo 'Report bugs to <bug-shtool@gnu.org>'
     echo ''
-    echo "Usage: shtool [<options>] [<cmd-name> [<cmd-options>] [<cmd-args>]]"
+    echo 'Usage: shtool [<options>] [<cmd-name> [<cmd-options>] [<cmd-args>]]'
     echo ''
     echo 'Available global <options>:'
     echo '  -v, --version   display shtool version information'
@@ -136,11 +161,11 @@ if [ ".$1" = ".-h" ] || [ ".$1" = ".--help" ]; then
     exit 0
 fi
 if [ ".$1" = ".-v" ] || [ ".$1" = ".--version" ]; then
-    echo "GNU shtool 2.0.1 (11-Aug-2004)"
+    echo "GNU shtool 2.0.5 (07-Feb-2006)"
     exit 0
 fi
 if [ ".$1" = ".-r" ] || [ ".$1" = ".--recreate" ]; then
-    shtoolize -obuild/shtool echo move install mkdir mkln subst
+    shtoolize -oshtool echo move install mkdir mkln subst
     exit 0
 fi
 if [ ".$1" = ".-d" ] || [ ".$1" = ".--debug" ]; then
@@ -404,6 +429,7 @@ esac
 
 #   establish a temporary file on request
 if [ ".$gen_tmpfile" = .yes ]; then
+    #   create (explicitly) secure temporary directory
     if [ ".$TMPDIR" != . ]; then
         tmpdir="$TMPDIR"
     elif [ ".$TEMPDIR" != . ]; then
@@ -411,10 +437,19 @@ if [ ".$gen_tmpfile" = .yes ]; then
     else
         tmpdir="/tmp"
     fi
-    tmpfile="$tmpdir/.shtool.$$"
-    rm -f $tmpfile >/dev/null 2>&1
-    touch $tmpfile
-    chmod 600 $tmpfile
+    tmpdir="$tmpdir/.shtool.$$"
+    ( umask 077
+      rm -rf "$tmpdir" >/dev/null 2>&1 || true
+      mkdir  "$tmpdir" >/dev/null 2>&1
+      if [ $? -ne 0 ]; then
+          echo "$msgprefix:Error: failed to create temporary directory \`$tmpdir'" 1>&2
+          exit 1
+      fi
+    )
+
+    #   create (implicitly) secure temporary file
+    tmpfile="$tmpdir/shtool.tmp"
+    touch "$tmpfile"
 fi
 
 #   utility function: map string to lower case
@@ -431,7 +466,7 @@ util_upper () {
 shtool_exit () {
     rc="$1"
     if [ ".$gen_tmpfile" = .yes ]; then
-        rm -f $tmpfile >/dev/null 2>&1 || true
+        rm -rf "$tmpdir" >/dev/null 2>&1 || true
     fi
     exit $rc
 }
@@ -445,7 +480,7 @@ case $tool in
 echo )
     ##
     ##  echo -- Print string with optional construct expansion
-    ##  Copyright (c) 1998-2004 Ralf S. Engelschall <rse@engelschall.com>
+    ##  Copyright (c) 1998-2006 Ralf S. Engelschall <rse@engelschall.com>
     ##
 
     text="$*"
@@ -743,7 +778,7 @@ echo )
 move )
     ##
     ##  move -- Move files with simultaneous substitution
-    ##  Copyright (c) 1999-2004 Ralf S. Engelschall <rse@engelschall.com>
+    ##  Copyright (c) 1999-2006 Ralf S. Engelschall <rse@engelschall.com>
     ##
 
     src="$1"
@@ -835,7 +870,7 @@ move )
 install )
     ##
     ##  install -- Install a program, script or datafile
-    ##  Copyright (c) 1997-2004 Ralf S. Engelschall <rse@engelschall.com>
+    ##  Copyright (c) 1997-2006 Ralf S. Engelschall <rse@engelschall.com>
     ##
 
     #   special case: "shtool install -d <dir> [...]" internally
@@ -998,7 +1033,7 @@ install )
 mkdir )
     ##
     ##  mkdir -- Make one or more directories
-    ##  Copyright (c) 1996-2004 Ralf S. Engelschall <rse@engelschall.com>
+    ##  Copyright (c) 1996-2006 Ralf S. Engelschall <rse@engelschall.com>
     ##
 
     errstatus=0
@@ -1086,7 +1121,7 @@ mkdir )
 mkln )
     ##
     ##  mkln -- Make link with calculation of relative paths
-    ##  Copyright (c) 1998-2004 Ralf S. Engelschall <rse@engelschall.com>
+    ##  Copyright (c) 1998-2006 Ralf S. Engelschall <rse@engelschall.com>
     ##
 
     #   determine source(s) and destination
@@ -1237,7 +1272,7 @@ mkln )
 subst )
     ##
     ##  subst -- Apply sed(1) substitution operations
-    ##  Copyright (c) 2001-2004 Ralf S. Engelschall <rse@engelschall.com>
+    ##  Copyright (c) 2001-2006 Ralf S. Engelschall <rse@engelschall.com>
     ##
 
     #   remember optional list of file(s)

build/srv.mk

 # $OpenLDAP$
-## Copyright 1998-2004 The OpenLDAP Foundation.
+## This work is part of OpenLDAP Software <http://www.openldap.org/>.
+##
+## Copyright 1998-2006 The OpenLDAP Foundation.
 ## All rights reserved.
 ##
 ## Redistribution and use in source and binary forms, with or without

build/top.mk

 # $OpenLDAP$
-## Copyright 1998-2004 The OpenLDAP Foundation.
+## This work is part of OpenLDAP Software <http://www.openldap.org/>.
+##
+## Copyright 1998-2006 The OpenLDAP Foundation.
 ## All rights reserved.
 ##
 ## Redistribution and use in source and binary forms, with or without
@@ -56,6 +58,8 @@ INSTALL_PROGRAM = $(INSTALL)
 INSTALL_DATA = $(INSTALL) -m 644
 INSTALL_SCRIPT = $(INSTALL)
 
+STRIP = -s
+
 LINT = lint
 5LINT = 5lint
 
@@ -77,9 +81,9 @@ LTONLY_LIB = $(@PLAT@_LTONLY_LIB)
 
 # libtool --only flag for modules: depends on linkage of module
 # The BUILD_MOD macro is defined in each backend Makefile.in file
-LTONLY_yes = static
-LTONLY_mod = shared
-LTONLY_MOD = # --only-$(BUILD_MOD)
+LTONLY_yes = --tag=disable-shared
+LTONLY_mod = --tag=disable-static
+LTONLY_MOD = $(LTONLY_$(BUILD_MOD))
 
 # platform-specific libtool flags
 NT_LTFLAGS_LIB = -no-undefined -avoid-version -rpath $(libdir)

build/version.h

 /* This work is part of OpenLDAP Software <http://www.openldap.org/>.
  *
- * Copyright 1998-2004 The OpenLDAP Foundation.
+ * Copyright 1998-2006 The OpenLDAP Foundation.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -13,6 +13,6 @@
  */
 
 static const char copyright[] =
-"Copyright 1998-2004 The OpenLDAP Foundation.  All rights reserved.\n"
+"Copyright 1998-2006 The OpenLDAP Foundation.  All rights reserved.\n"
 "COPYING RESTRICTIONS APPLY.\n";
 

build/version.sh

@@ -2,7 +2,7 @@
 # $OpenLDAP$
 ## This work is part of OpenLDAP Software <http://www.openldap.org/>.
 ##
-## Copyright 1998-2004 The OpenLDAP Foundation.
+## Copyright 1998-2006 The OpenLDAP Foundation.
 ## All rights reserved.
 ##
 ## Redistribution and use in source and binary forms, with or without

build/version.var

@@ -2,7 +2,7 @@
 # $OpenLDAP$
 ## This work is part of OpenLDAP Software <http://www.openldap.org/>.
 ##
-## Copyright 1998-2004 The OpenLDAP Foundation.
+## Copyright 1998-2006 The OpenLDAP Foundation.
 ## All rights reserved.
 ##
 ## Redistribution and use in source and binary forms, with or without
@@ -14,10 +14,10 @@
 ## <http://www.OpenLDAP.org/license.html>.
 ol_package=OpenLDAP
 ol_major=2
-ol_minor=X
+ol_minor=3
 ol_patch=X
-ol_api_inc=000000
-ol_api_current=0
-ol_api_revision=0
-ol_api_age=0
-ol_release_date="00/00/0000"
+ol_api_inc=20325
+ol_api_current=2
+ol_api_revision=13
+ol_api_age=2
+ol_release_date="2006/08/01"

clients/Makefile.in

 # Clients Makefile.in for OpenLDAP
 # $OpenLDAP$
-## Copyright 1998-2004 The OpenLDAP Foundation.
+## Copyright 1998-2006 The OpenLDAP Foundation.
 ## All rights reserved.
 ##
 ## Redistribution and use in source and binary forms, with or without

clients/tools/Makefile.in

 # Makefile for LDAP tools
 # $OpenLDAP$
-## Copyright 1998-2004 The OpenLDAP Foundation.
+## Copyright 1998-2006 The OpenLDAP Foundation.
 ## All rights reserved.
 ##
 ## Redistribution and use in source and binary forms, with or without
@@ -98,10 +98,10 @@ install-local:	FORCE
 	-$(MKDIR) $(DESTDIR)$(bindir)
 	@(								\
 	    for prg in $(PROGRAMS); do					\
-		$(LTINSTALL) $(INSTALLFLAGS) -s -m 755 $$prg$(EXEEXT)	\
+		$(LTINSTALL) $(INSTALLFLAGS) $(STRIP) -m 755 $$prg$(EXEEXT)	\
 		    $(DESTDIR)$(bindir);				\
 	    done							\
 	)
 	$(RM) $(DESTDIR)$(bindir)/ldapadd$(EXEEXT)
-	$(LN) $(DESTDIR)$(bindir)/ldapmodify$(EXEEXT) $(DESTDIR)$(bindir)/ldapadd$(EXEEXT)
+	$(LN_S) $(DESTDIR)$(bindir)/ldapmodify$(EXEEXT) $(DESTDIR)$(bindir)/ldapadd$(EXEEXT)
 

clients/tools/common.c

@@ -2,7 +2,7 @@
 /* $OpenLDAP$ */
 /* This work is part of OpenLDAP Software <http://www.openldap.org/>.
  *
- * Copyright 1998-2004 The OpenLDAP Foundation.
+ * Copyright 1998-2006 The OpenLDAP Foundation.
  * Portions Copyright 2003 Kurt D. Zeilenga.
  * Portions Copyright 2003 IBM Corporation.
  * All rights reserved.
@@ -32,6 +32,14 @@
 #include <ac/unistd.h>
 #include <ac/errno.h>
 
+#ifdef HAVE_CYRUS_SASL
+#ifdef HAVE_SASL_SASL_H
+#include <sasl/sasl.h>
+#else
+#include <sasl.h>
+#endif
+#endif
+
 #include <ldap.h>
 
 #include "lutil_ldap.h"
@@ -63,6 +71,7 @@ int   use_tls = 0;
 int	  assertctl;
 char *assertion = NULL;
 char *authzid = NULL;
+int   manageDIT = 0;
 int   manageDSAit = 0;
 int   noop = 0;
 int   ppolicy = 0;
@@ -80,6 +89,21 @@ int   protocol = -1;
 int   verbose = 0;
 int   version = 0;
 
+#ifdef LDAP_CONTROL_X_CHAINING_BEHAVIOR
+int chaining = 0;
+static int chainingResolve = -1;
+static int chainingContinuation = -1;
+#endif /* LDAP_CONTROL_X_CHAINING_BEHAVIOR */
+
+static int gotintr;
+static int abcan;
+
+RETSIGTYPE
+do_sig( int sig )
+{
+	gotintr = abcan;
+}
+
 /* Set in main() */
 char *prog = NULL;
 
@@ -91,6 +115,17 @@ tool_init( void )
 	ldap_pvt_textdomain(OPENLDAP_PACKAGE);
 }
 
+void
+tool_destroy( void )
+{
+#ifdef HAVE_CYRUS_SASL
+	sasl_done();
+#endif
+#ifdef HAVE_TLS
+	ldap_pvt_tls_destroy();
+#endif
+}
+
 void
 tool_common_usage( void )
 {
@@ -102,6 +137,14 @@ N_("  -D binddn  bind DN\n"),
 N_("  -e [!]<ext>[=<extparam>] general extensions (! indicates criticality)\n")
 N_("             [!]assert=<filter>     (an RFC 2254 Filter)\n")
 N_("             [!]authzid=<authzid>   (\"dn:<dn>\" or \"u:<user>\")\n")
+#ifdef LDAP_CONTROL_X_CHAINING_BEHAVIOR
+N_("             [!]chaining[=<resolveBehavior>[/<continuationBehavior>]]\n")
+N_("                     one of \"chainingPreferred\", \"chainingRequired\",\n")
+N_("                     \"referralsPreferred\", \"referralsRequired\"\n")
+#endif /* LDAP_CONTROL_X_CHAINING_BEHAVIOR */
+#ifdef LDAP_DEVEL
+N_("             [!]manageDIT\n")
+#endif
 N_("             [!]manageDSAit\n")
 N_("             [!]noop\n")
 #ifdef LDAP_CONTROL_PASSWORDPOLICYREQUEST
@@ -109,6 +152,7 @@ N_("             ppolicy\n")
 #endif
 N_("             [!]postread[=<attrs>]  (a comma-separated attribute list)\n")
 N_("             [!]preread[=<attrs>]   (a comma-separated attribute list)\n"),
+N_("             abandon, cancel (SIGINT sends abandon/cancel; not really controls)\n")
 N_("  -f file    read operations from `file'\n"),
 N_("  -h host    LDAP server\n"),
 N_("  -H URI     LDAP Uniform Resource Indentifier(s)\n"),
@@ -144,6 +188,34 @@ NULL
 	}
 }
 
+void tool_perror(
+	char *func,
+	int err,
+	char *extra,
+	char *matched,
+	char *info,
+	char **refs )
+{
+	fprintf( stderr, "%s: %s (%d)%s\n",
+		func, ldap_err2string( err ), err, extra ? extra : "" );
+
+	if ( matched && *matched ) {
+		fprintf( stderr, _("\tmatched DN: %s\n"), matched );
+	}
+
+	if ( info && *info ) {
+		fprintf( stderr, _("\tadditional info: %s\n"), info );
+	}
+
+	if ( refs && *refs ) {
+		int i;
+		fprintf( stderr, _("\treferrals:\n") );
+		for( i=0; refs[i]; i++ ) {
+			fprintf( stderr, "\t\t%s\n", refs[i] );
+		}
+	}
+}
+
 
 void
 tool_args( int argc, char **argv )
@@ -224,6 +296,20 @@ tool_args( int argc, char **argv )
 				assert( authzid == NULL );
 				authzid = cvalue;
 
+			} else if ( strcasecmp( control, "manageDIT" ) == 0 ) {
+				if( manageDIT ) {
+					fprintf( stderr,
+						"manageDIT control previously specified\n");
+					exit( EXIT_FAILURE );
+				}
+				if( cvalue != NULL ) {
+					fprintf( stderr,
+						"manageDIT: no control value expected\n" );
+					usage();
+				}
+
+				manageDIT = 1 + crit;
+
 			} else if ( strcasecmp( control, "manageDSAit" ) == 0 ) {
 				if( manageDSAit ) {
 					fprintf( stderr,
@@ -286,6 +372,59 @@ tool_args( int argc, char **argv )
 				postread = 1 + crit;
 				postread_attrs = cvalue;
 
+#ifdef LDAP_CONTROL_X_CHAINING_BEHAVIOR
+			} else if ( strcasecmp( control, "chaining" ) == 0 ) {
+				chaining = 1 + crit;
+
+				if ( cvalue != NULL ) {
+					char	*continuation;
+
+					continuation = strchr( cvalue, '/' );
+					if ( continuation ) {
+						/* FIXME: this makes sense only in searches */
+						*continuation++ = '\0';
+						if ( strcasecmp( continuation, "chainingPreferred" ) == 0 ) {
+							chainingContinuation = LDAP_CHAINING_PREFERRED;
+						} else if ( strcasecmp( continuation, "chainingRequired" ) == 0 ) {
+							chainingContinuation = LDAP_CHAINING_REQUIRED;
+						} else if ( strcasecmp( continuation, "referralsPreferred" ) == 0 ) {
+							chainingContinuation = LDAP_REFERRALS_PREFERRED;
+						} else if ( strcasecmp( continuation, "referralsRequired" ) == 0 ) {
+							chainingContinuation = LDAP_REFERRALS_REQUIRED;
+						} else {
+							fprintf( stderr,
+								"chaining behavior control "
+								"continuation value \"%s\" invalid\n",
+								continuation );
+							exit( EXIT_FAILURE );
+						}
+					}
+	
+					if ( strcasecmp( cvalue, "chainingPreferred" ) == 0 ) {
+						chainingResolve = LDAP_CHAINING_PREFERRED;
+					} else if ( strcasecmp( cvalue, "chainingRequired" ) == 0 ) {
+						chainingResolve = LDAP_CHAINING_REQUIRED;
+					} else if ( strcasecmp( cvalue, "referralsPreferred" ) == 0 ) {
+						chainingResolve = LDAP_REFERRALS_PREFERRED;
+					} else if ( strcasecmp( cvalue, "referralsRequired" ) == 0 ) {
+						chainingResolve = LDAP_REFERRALS_REQUIRED;
+					} else {
+						fprintf( stderr,
+							"chaining behavior control "
+							"resolve value \"%s\" invalid\n",
+							cvalue);
+						exit( EXIT_FAILURE );
+					}
+				}
+#endif /* LDAP_CONTROL_X_CHAINING_BEHAVIOR */
+
+			/* this shouldn't go here, really; but it's a feature... */
+			} else if ( strcasecmp( control, "abandon" ) == 0 ) {
+				abcan = LDAP_REQ_ABANDON;
+
+			} else if ( strcasecmp( control, "cancel" ) == 0 ) {
+				abcan = LDAP_REQ_EXTENDED;
+
 			} else {
 				fprintf( stderr, "Invalid general control name: %s\n",
 					control );
@@ -574,28 +713,28 @@ tool_args( int argc, char **argv )
 
 		if (api.ldapai_info_version != LDAP_API_INFO_VERSION) {
 			fprintf( stderr, "LDAP APIInfo version mismatch: "
-				"got %d, expected %d\n",
+				"library %d, header %d\n",
 				api.ldapai_info_version, LDAP_API_INFO_VERSION );
 			exit( EXIT_FAILURE );
 		}
 
 		if( api.ldapai_api_version != LDAP_API_VERSION ) {
 			fprintf( stderr, "LDAP API version mismatch: "
-				"got %d, expected %d\n",
+				"library %d, header %d\n",
 				api.ldapai_api_version, LDAP_API_VERSION );
 			exit( EXIT_FAILURE );
 		}
 
 		if( strcmp(api.ldapai_vendor_name, LDAP_VENDOR_NAME ) != 0 ) {
 			fprintf( stderr, "LDAP vendor name mismatch: "
-				"got %s, expected %s\n",
+				"library %s, header %s\n",
 				api.ldapai_vendor_name, LDAP_VENDOR_NAME );
 			exit( EXIT_FAILURE );
 		}
 
 		if( api.ldapai_vendor_version != LDAP_VENDOR_VERSION ) {
 			fprintf( stderr, "LDAP vendor version mismatch: "
-				"got %d, expected %d\n",
+				"library %d, header %d\n",
 				api.ldapai_vendor_version, LDAP_VENDOR_VERSION );
 			exit( EXIT_FAILURE );
 		}
@@ -606,6 +745,9 @@ tool_args( int argc, char **argv )
 				LDAP_VENDOR_NAME, LDAP_VENDOR_VERSION );
 			if (version > 1) exit( EXIT_SUCCESS );
 		}
+
+		ldap_memfree( api.ldapai_vendor_name );
+		ber_memvfree( (void **)api.ldapai_extensions );
 	}
 
 	if (protocol == -1)
@@ -635,7 +777,12 @@ tool_args( int argc, char **argv )
 		}
 	}
 	if( protocol == LDAP_VERSION2 ) {
-		if( authzid || manageDSAit || noop || ppolicy ) {
+		if( assertctl || authzid || manageDIT || manageDSAit ||
+#ifdef LDAP_CONTROL_X_CHAINING_BEHAVIOR
+			chaining ||
+#endif
+			noop || ppolicy || preread || postread )
+		{
 			fprintf( stderr, "%s: -e/-M incompatible with LDAPv2\n", prog );
 			exit( EXIT_FAILURE );
 		}
@@ -688,6 +835,10 @@ tool_conn_setup( int not, void (*private_setup)( LDAP * ) )
 	(void) SIGNAL( SIGPIPE, SIG_IGN );
 #endif
 
+	if ( abcan ) {
+		SIGNAL( SIGINT, do_sig );
+	}
+
 	if ( !not ) {
 		int rc;
 
@@ -808,11 +959,14 @@ tool_bind( LDAP *ld )
 		LDAPMessage *result;
 		LDAPControl **ctrls;
 		char msgbuf[256];
+		char *matched = NULL;
+		char *info = NULL;
+		char **refs = NULL;
 
 		msgbuf[0] = 0;
 
-		if (( msgid = ldap_bind( ld, binddn, passwd.bv_val, authmethod )) == -1 )
-		{
+		msgid = ldap_bind( ld, binddn, passwd.bv_val, authmethod );
+		if ( msgid == -1 ) {
 			ldap_perror( ld, "ldap_bind" );
 			exit( EXIT_FAILURE );
 		}
@@ -822,8 +976,9 @@ tool_bind( LDAP *ld )
 			exit( EXIT_FAILURE );
 		}
 
-		if ( ldap_parse_result( ld, result, &err, NULL, NULL, NULL,
-			&ctrls, 1 ) != LDAP_SUCCESS ) {
+		if ( ldap_parse_result( ld, result, &err, &matched, &info, &refs,
+			&ctrls, 1 ) != LDAP_SUCCESS )
+		{
 			ldap_perror( ld, "ldap_bind parse result" );
 			exit( EXIT_FAILURE );
 		}
@@ -834,9 +989,12 @@ tool_bind( LDAP *ld )
 			int expire, grace, len = 0;
 			LDAPPasswordPolicyError pErr = -1;
 			
-			ctrl = ldap_find_control( LDAP_CONTROL_PASSWORDPOLICYRESPONSE, ctrls );
+			ctrl = ldap_find_control( LDAP_CONTROL_PASSWORDPOLICYRESPONSE,
+				ctrls );
+
 			if ( ctrl && ldap_parse_passwordpolicy_control( ld, ctrl,
-				&expire, &grace, &pErr ) == LDAP_SUCCESS ) {
+				&expire, &grace, &pErr ) == LDAP_SUCCESS )
+			{
 				if ( pErr != PP_noError ){
 					msgbuf[0] = ';';
 					msgbuf[1] = ' ';
@@ -844,30 +1002,58 @@ tool_bind( LDAP *ld )
 					len = strlen( msgbuf );
 				}
 				if ( expire >= 0 ) {
-					sprintf( msgbuf+len, " (Password expires in %d seconds)", expire );
+					sprintf( msgbuf+len,
+						" (Password expires in %d seconds)",
+						expire );
 				} else if ( grace >= 0 ) {
-					sprintf( msgbuf+len, " (Password expired, %d grace logins remain)", grace );
+					sprintf( msgbuf+len,
+						" (Password expired, %d grace logins remain)",
+						grace );
 				}
 			}
 		}
 #endif
-		if ( err != LDAP_SUCCESS || msgbuf[0] ) {
-			fprintf( stderr, "ldap_bind: %s%s\n", ldap_err2string( err ),
-				msgbuf );
-			if ( err != LDAP_SUCCESS ) {
-				exit( EXIT_FAILURE );
-			}
+
+		if ( ctrls ) {
+			ldap_controls_free( ctrls );
+		}
+
+		if ( err != LDAP_SUCCESS
+			|| msgbuf[0]
+			|| ( matched && matched[ 0 ] )
+			|| ( info && info[ 0 ] )
+			|| refs )
+		{
+			tool_perror( "ldap_bind", err, msgbuf, matched, info, refs );
+
+			if( matched ) ber_memfree( matched );
+			if( info ) ber_memfree( info );
+			if( refs ) ber_memvfree( (void **)refs );
+
+			if ( err != LDAP_SUCCESS ) exit( EXIT_FAILURE );
 		}
 	}
 }
 
+void
+tool_unbind( LDAP *ld )
+{
+	int err = ldap_set_option( ld, LDAP_OPT_SERVER_CONTROLS, NULL );
+
+	if ( err != LDAP_OPT_SUCCESS ) {
+		fprintf( stderr, "Could not unset controls\n");
+	}
+
+	(void) ldap_unbind_ext( ld, NULL, NULL );
+}
+
 
 /* Set server controls.  Add controls extra_c[0..count-1], if set. */
 void
 tool_server_controls( LDAP *ld, LDAPControl *extra_c, int count )
 {
 	int i = 0, j, crit = 0, err;
-	LDAPControl c[8], **ctrls;
+	LDAPControl c[10], **ctrls;
 
 	ctrls = (LDAPControl**) malloc(sizeof(c) + (count+1)*sizeof(LDAPControl*));
 	if ( ctrls == NULL ) {
@@ -913,10 +1099,17 @@ tool_server_controls( LDAP *ld, LDAPControl *extra_c, int count )
 		i++;
 	}
 
+	if ( manageDIT ) {
+		c[i].ldctl_oid = LDAP_CONTROL_MANAGEDIT;
+		BER_BVZERO( &c[i].ldctl_value );
+		c[i].ldctl_iscritical = manageDIT > 1;
+		ctrls[i] = &c[i];
+		i++;
+	}
+
 	if ( manageDSAit ) {
 		c[i].ldctl_oid = LDAP_CONTROL_MANAGEDSAIT;
-		c[i].ldctl_value.bv_val = NULL;
-		c[i].ldctl_value.bv_len = 0;
+		BER_BVZERO( &c[i].ldctl_value );
 		c[i].ldctl_iscritical = manageDSAit > 1;
 		ctrls[i] = &c[i];
 		i++;
@@ -924,8 +1117,7 @@ tool_server_controls( LDAP *ld, LDAPControl *extra_c, int count )
 
 	if ( noop ) {
 		c[i].ldctl_oid = LDAP_CONTROL_NOOP;
-		c[i].ldctl_value.bv_val = NULL;
-		c[i].ldctl_value.bv_len = 0;
+		BER_BVZERO( &c[i].ldctl_value );
 		c[i].ldctl_iscritical = noop > 1;
 		ctrls[i] = &c[i];
 		i++;
@@ -991,6 +1183,52 @@ tool_server_controls( LDAP *ld, LDAPControl *extra_c, int count )
 		if( attrs ) ldap_charray_free( attrs );
 	}
 
+#ifdef LDAP_CONTROL_X_CHAINING_BEHAVIOR
+	if ( chaining ) {
+		if ( chainingResolve > -1 ) {
+			BerElementBuffer berbuf;
+			BerElement *ber = (BerElement *)&berbuf;
+
+			ber_init2( ber, NULL, LBER_USE_DER );
+
+			err = ber_printf( ber, "{e" /* } */, chainingResolve );
+		    	if ( err == -1 ) {
+				ber_free( ber, 1 );
+				fprintf( stderr, _("Chaining behavior control encoding error!\n") );
+				exit( EXIT_FAILURE );
+			}
+
+			if ( chainingContinuation > -1 ) {
+				err = ber_printf( ber, "e", chainingContinuation );
+		    		if ( err == -1 ) {
+					ber_free( ber, 1 );
+					fprintf( stderr, _("Chaining behavior control encoding error!\n") );
+					exit( EXIT_FAILURE );
+				}
+			}
+
+			err = ber_printf( ber, /* { */ "N}" );
+		    	if ( err == -1 ) {
+				ber_free( ber, 1 );
+				fprintf( stderr, _("Chaining behavior control encoding error!\n") );
+				exit( EXIT_FAILURE );
+			}
+
+			if ( ber_flatten2( ber, &c[i].ldctl_value, 0 ) == -1 ) {
+				exit( EXIT_FAILURE );
+			}
+
+		} else {
+			BER_BVZERO( &c[i].ldctl_value );
+		}
+
+		c[i].ldctl_oid = LDAP_CONTROL_X_CHAINING_BEHAVIOR;
+		c[i].ldctl_iscritical = chaining > 1;
+		ctrls[i] = &c[i];
+		i++;
+	}
+#endif /* LDAP_CONTROL_X_CHAINING_BEHAVIOR */
+
 	while ( count-- ) {
 		ctrls[i++] = extra_c++;
 	}
@@ -1011,3 +1249,26 @@ tool_server_controls( LDAP *ld, LDAPControl *extra_c, int count )
 		exit( EXIT_FAILURE );
 	}
 }
+
+int
+tool_check_abandon( LDAP *ld, int msgid )
+{
+	int	rc;
+
+	switch ( gotintr ) {
+	case LDAP_REQ_EXTENDED:
+		rc = ldap_cancel_s( ld, msgid, NULL, NULL );
+		fprintf( stderr, "got interrupt, cancel got %d: %s\n",
+				rc, ldap_err2string( rc ) );
+		return -1;
+
+	case LDAP_REQ_ABANDON:
+		rc = ldap_abandon( ld, msgid );
+		fprintf( stderr, "got interrupt, abandon got %d: %s\n",
+				rc, ldap_err2string( rc ) );
+		return -1;
+	}
+
+	return 0;
+}
+

clients/tools/common.h

@@ -2,7 +2,7 @@
 /* $OpenLDAP$ */
 /* This work is part of OpenLDAP Software <http://www.openldap.org/>.
  *
- * Copyright 1998-2004 The OpenLDAP Foundation.
+ * Copyright 1998-2006 The OpenLDAP Foundation.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -45,10 +45,14 @@ extern int   use_tls;
 
 extern char *assertion;
 extern char *authzid;
+extern int   manageDIT;
 extern int   manageDSAit;
 extern int   noop;
 extern int   ppolicy;
 extern int	preread, postread;
+#ifdef LDAP_CONTROL_X_CHAINING_BEHAVIOR
+extern int	chaining;
+#endif /* LDAP_CONTROL_X_CHAINING_BEHAVIOR */
 
 extern int   not;
 extern int   want_bindpw;
@@ -74,7 +78,17 @@ void tool_common_usage LDAP_P(( void ));
 void tool_args LDAP_P(( int, char ** ));
 LDAP *tool_conn_setup LDAP_P(( int dont, void (*private_setup)( LDAP * ) ));
 void tool_bind LDAP_P(( LDAP * ));
+void tool_unbind LDAP_P(( LDAP * ));
+void tool_destroy LDAP_P(( void ));
 void tool_server_controls LDAP_P(( LDAP *, LDAPControl *, int ));
+int tool_check_abandon LDAP_P(( LDAP *ld, int msgid ));
+void tool_perror LDAP_P((
+	char *func,
+	int err,
+	char *extra,
+	char *matched,
+	char *info,
+	char **refs ));
 
 LDAP_END_DECL