Commit 03448dcb authored by Kurt Zeilenga's avatar Kurt Zeilenga
Browse files

move old build files to the attic

parent 0fb937d4
#-----------------------------------------------------------------------------
# Copyright (c) 1994 Regents of the University of Michigan.
# All rights reserved.
#
# Redistribution and use in source and binary forms are permitted
# provided that this notice is preserved and that due credit is given
# to the University of Michigan at Ann Arbor. The name of the University
# may not be used to endorse or promote products derived from this
# software without specific prior written permission. This software
# is provided ``as is'' without express or implied warranty.
#
# LDAP common Make defines (included in all but top-level Makefile)
#
#-----------------------------------------------------------------------------
#############################################################################
## Edit the following variables to have appropriate values for your system ##
#############################################################################
#############################################################################
## LDAP install paths ##
#############################################################################
#
# by default, everything is installed below INSTROOT
# servers, config files, etc. are put in ETCDIR
# include files get put in INCLUDEDIR
# libraries are put in LIBDIR
# man pages are put under MANDIR
# programs end-users will run are put in BINDIR
#
INSTROOT=/usr/local
ETCDIR= $(INSTROOT)/etc
INCLUDEDIR= $(INSTROOT)/include
LIBDIR= $(INSTROOT)/lib
MANDIR= $(INSTROOT)/man
BINDIR= $(INSTROOT)/bin
#
# if you want things to run in a different directory from where they
# are installed, set this accordingly (this path gets compiled into a
# few binaries). otherwise, leave it alone.
RUNTIMEETCDIR= $(ETCDIR)
#############################################################################
## General compiler options ##
#############################################################################
# Passed to every compile (cc or gcc). This is where you put -O or -g, etc.
EXTRACFLAGS=-g
# Passed to every link (ld). Include -g here if you did in EXTRACFLAGS.
EXTRALDFLAGS=-g
#############################################################################
## If you are NOT using Kerberos authentication, you can skip this section.##
#############################################################################
#
# Otherwise, to enable kerberos authentication, uncomment KERBEROS (and
# AFSKERBEROS if you are running the AFS version of kerberos). Also
# uncomment and change the various KRB* lines to point to where the
# kerberos libraries and include files are installed at your site.
#
KERBEROS=-DKERBEROS
AFSKERBEROS=-DAFSKERBEROS
KRBINCLUDEFLAG = -I/usr/local/kerberos/include
KRBLIBFLAG = -L/usr/local/kerberos/lib
KRBLIBS = -lkrb -ldes
#############################################################################
## ISODE is required ONLY to build the ldap <-> X.500 server (ldapd) ##
## If you don't want to build it, you can skip this section. ##
#############################################################################
#
# To build the ldap server, uncomment the HAVEISODE line,
# and the section describing build settings for your version of isode.
#
HAVEISODE = yes
# If you compiled ISODE with TURBO_DISK defined, uncomment this
#ISODETURBOLIBS = -lgdbm
# uncomment these to have ldapd "pretty print" protocol elements w/debugging
PEPSY_DUMP=-DPEPSY_DUMP
PEPSY=/usr/local/ic/bin/pepsy
# uncommment this line to have ldapd load PP syntax handlers
# you'll also need to add -lpp to ISODEBASELIBS below
#LDAP_USE_PP=-DLDAP_USE_PP
# uncomment NO_SETPROCTITLE to have ldapd NOT change its title
#NO_SETPROCTITLE=-DNOSETPROCTITLE
#
# ISODE Consortium release build settings
# You should change the next line so that ICRELEASE matches the (integer)
# version number of whatever IC release you have, e.g. 1, 2, or 3 and
# also uncomment the next 5 lines.
ICRELEASE=-DICRELEASE=2
ISODEPACKAGE=-DISODEPACKAGE=IC
ISODEINCLUDEFLAG= -I/usr/local/ic/include
ISODELIBFLAG = -L/usr/local/ic/lib
ISODEBASELIBS = -lisode
#
# Freely available ISODE 8.0 release build settings (uncomment the next 4 lines)
#ISODEPACKAGE=-DISODEPACKAGE
#ISODEINCLUDEFLAG= -I/usr/local/isode/include
#ISODELIBFLAG = -L/usr/local/isode/lib
#ISODEBASELIBS = -ldsap -lisode
#
# NEXOR ISODE release build settings (uncomment the next 4 lines)
#ISODEPACKAGE=-DISODEPACKAGE=XT
#ISODEINCLUDEFLAG= -I/usr/include/isode
#ISODELIBFLAG = -L/usr/local/lib -L/usr/sunlink/osi/lib
#ISODEBASELIBS = -lxtpp -lresolv -lxtdsap -lxtisode -losi
#############################################################################
## If you don't want to run slapd, skip this section. ##
#############################################################################
#
# To build slapd (the stand-alone ldap daemon), uncomment the MAKESLAPD
# line and select the SLAPD_BACKENDS you want to use. If you enable the
# LDBM backend, also select one of the LDBM backends.
MAKESLAPD= yes
#
# remove the defines for backends you don't want to enable
SLAPD_BACKENDS= -DLDAP_LDBM -DLDAP_SHELL -DLDAP_PASSWD
#
# If you have included -DLDAP_LDBM in the SLAPD_BACKENDS line you need
# to specify which low-level database package to use. There are
# four choices: Berkeley db b-tree, Berkeley db hash, GNU dbm, or ndbm.
#
# berkeley db btree package
LDBMBACKEND=-DLDBM_USE_DBBTREE
LDBMINCLUDE=-I/usr/local/include
LDBMLIB=-ldb
# berkeley db hash package
#LDBMBACKEND=-DLDBM_USE_DBHASH
#LDBMINCLUDE=-I/usr/local/include
#LDBMLIB=-ldb
# gnu dbm (gdbm)
#LDBMBACKEND=-DLDBM_USE_GDBM
#LDBMINCLUDE=-I/usr/local/include
#LDBMLIB=-lgdbm
# standard unix ndbm
#LDBMBACKEND=-DLDBM_USE_NDBM
#
# if you want to use a non-default threads package change these lines
#THREADS=-DNO_THREADS
#THREADSLIB=
#############################################################################
## The following options are used by the xax500 client. If you haven't ##
## retrieved the xax500 source and dropped it into the "clients" ##
## directory, you can skip this section. ##
#############################################################################
#
# location of your X include files
#XINCLUDES= -I/usr/local/X11/include
#
# location of your X libraries
#XLIBDIRS=-L/usr/local/X11/lib
#
# include any extra X libraries you need here
# the following works with sunos 4 and X11R5
#XLIBS = $(XLIBDIRS) -lXm -lXt -lX11
# the following has been known to work with Solaris 2.4 and X11R6
#XLIBS = $(XLIBDIRS) -lXm -lXext -lSM -lICE -lXpm -lXt -lX11
#############################################################################
## If you don't want to do auto-translation of character sets, skip this ##
#############################################################################
#
# Otherwise, uncomment this line and set the following options.
#STR_TRANSLATION=-DSTR_TRANSLATION
#
# remove the defines for LDAP client library T.61 character translation
# you do not need. If you use LDAP_CHARSET_8859, replace the '1' in "88591"
# with the number of the particular character set you use. E.g., use "88594"
# if you use the ISO 8859-4 chracter set.
#LIBLDAP_CHARSETS=-DLDAP_CHARSET_8859="88591"
#
# uncomment one these lines to enable automatic T.61 translation by default
#LIBLDAP_DEF_CHARSET=-DLDAP_DEFAULT_CHARSET=LDAP_CHARSET_8859
#############################################################################
## General options ##
#############################################################################
# uncomment this line to enable debugging code (a good idea)
LDAP_DEBUG=-DLDAP_DEBUG
# uncomment this line to turn on a few U of Michigan specific things
UOFM=-DUOFM
# uncomment this line to delete a few printfs in the lber and ldap libraries.
#NO_USERINTERFACE=-DNO_USERINTERFACE
# uncomment this line to include Connectionless LDAP support
CLDAP=-DCLDAP
# uncomment this line to eliminate local caching support in the libldap
#NO_CACHE=-DNO_CACHE
# uncomment this line to enable support for LDAP referrals in libldap
LDAP_REFERRALS=-DLDAP_REFERRALS
# uncomment this line to use soundex for approximate matches in slapd.
# the default is to use the metaphone algorithm.
#PHONETIC=-DSOUNDEX
#-----------------------------------------------------------------------------
# Copyright (c) 1994 Regents of the University of Michigan.
# All rights reserved.
#
# Redistribution and use in source and binary forms are permitted
# provided that this notice is preserved and that due credit is given
# to the University of Michigan at Ann Arbor. The name of the University
# may not be used to endorse or promote products derived from this
# software without specific prior written permission. This software
# is provided ``as is'' without express or implied warranty.
#
# LDAP include file makefile
#
#-----------------------------------------------------------------------------
LDAPSRC=..
all: ldapconfig.h FORCE
@if [ ! -z "$(SYSEXITSPATH)" -a ! -r sysexits.h ]; then \
echo "$(LN) $(SYSEXITSPATH) sysexits.h"; \
$(LN) $(SYSEXITSPATH) sysexits.h; \
else \
exit 0; \
fi
ldapconfig.h: ldapconfig.h.edit Makefile
@$(RM) $@
@echo "/*" > $@; \
echo " * This file was automatically generated. Do not edit it." >> $@; \
echo " * Instead, edit the file ldapconfig.h.edit. See the LDAP" >> $@; \
echo " * INSTALL file for more information." >> $@; \
echo " */ " >> $@; \
echo "" >> $@; \
$(SED) -e 's;%ETCDIR%;$(RUNTIMEETCDIR);' ldapconfig.h.edit >> $@; \
$(CHMOD) 444 $@
install: all FORCE
-$(MKDIR) -p $(INCLUDEDIR)
$(INSTALL) $(INSTALLFLAGS) -m 644 ldap.h $(INCLUDEDIR)
$(INSTALL) $(INSTALLFLAGS) -m 644 lber.h $(INCLUDEDIR)
$(INSTALL) $(INSTALLFLAGS) -m 644 proto-lber.h $(INCLUDEDIR)
$(INSTALL) $(INSTALLFLAGS) -m 644 proto-ldap.h $(INCLUDEDIR)
$(INSTALL) $(INSTALLFLAGS) -m 644 disptmpl.h $(INCLUDEDIR)
$(INSTALL) $(INSTALLFLAGS) -m 644 srchpref.h $(INCLUDEDIR)
depend: FORCE
clean: FORCE
veryclean: clean
$(RM) ldapconfig.h
@if [ ! -z "$(SYSEXITSPATH)" ]; then \
echo "$(RM) sysexits.h"; \
$(RM) sysexits.h; \
else \
exit 0; \
fi
links:
@echo "making links in `$(PWD)`
@$(LN) .src/*.h .
@cp .src/ldapconfig.h.edit .
@-$(RM) ldapconfig.h
/*
* Copyright (c) 1994 Regents of the University of Michigan.
* All rights reserved.
*
* Redistribution and use in source and binary forms are permitted
* provided that this notice is preserved and that due credit is given
* to the University of Michigan at Ann Arbor. The name of the University
* may not be used to endorse or promote products derived from this
* software without specific prior written permission. This software
* is provided ``as is'' without express or implied warranty.
*/
#ifndef _CONFIG_H
#define _CONFIG_H
/*
* config.h for LDAP -- edit this file to customize LDAP client behavior.
* NO platform-specific definitions should be placed in this file.
* Note that this is NOT used by the LDAP or LBER libraries.
*/
/*
* SHARED DEFINITIONS - things you should change
*/
/* default ldap host */
#define LDAPHOST "localhost"
/* default place to start searching */
#define DEFAULT_BASE "o=Your Organization Name, c=US"
/*********************************************************************
* *
* You probably do not need to edit anything below this point *
* *
*********************************************************************/
/*
* SHARED DEFINITIONS - other things you can change
*/
/* default attribute to use when sorting entries, NULL => sort by DN */
#define SORT_ATTR NULL
/* default count of DN components to show in entry displays */
#define DEFAULT_RDNCOUNT 2
/* default config file locations */
#define FILTERFILE "%ETCDIR%/ldapfilter.conf"
#define TEMPLATEFILE "%ETCDIR%/ldaptemplates.conf"
#define SEARCHFILE "%ETCDIR%/ldapsearchprefs.conf"
#define FRIENDLYFILE "%ETCDIR%/ldapfriendly"
/*
* FINGER DEFINITIONS
*/
/* who to bind as */
#define FINGER_BINDDN NULL
/* where to search */
#define FINGER_BASE DEFAULT_BASE
/* banner to print */
#define FINGER_BANNER "X.500 Finger Service...\r\n"
/* who to report errors to */
#define FINGER_ERRORS "your local system administrator"
/* what to say if no matches are found */
#define FINGER_NOMATCH "Search failed to find anything.\r\n"
/* what to say if the service may be unavailable */
#define FINGER_UNAVAILABLE \
"The X.500 service may be temporarily unavailable.\r\n\
Please try again later.\r\n"
/* printed if a match has no email address - for disptmp default */
#define FINGER_NOEMAIL1 "None registered in this service."
#define FINGER_NOEMAIL2 NULL
#define FINGER_NOEMAIL { FINGER_NOEMAIL1, FINGER_NOEMAIL2, NULL }
/* maximum number of matches returned */
#define FINGER_SIZELIMIT 50
/* max number of hits displayed in full before a list is presented */
#define FINGER_LISTLIMIT 1
/* what to exec for "finger @host" */
#define FINGER_CMD "/usr/ucb/finger"
/* how to treat aliases when searching */
#define FINGER_DEREF LDAP_DEREF_FINDING
/* attribute to use when sorting results */
#define FINGER_SORT_ATTR SORT_ATTR
/* enable ufn support */
#define FINGER_UFN
/* timeout for searches */
#define FINGER_TIMEOUT 60
/* number of DN components to show in entry displays */
#define FINGER_RDNCOUNT DEFAULT_RDNCOUNT
/*
* GO500 GOPHER GATEWAY DEFINITIONS
*/
/* who to bind as */
#define GO500_BINDDN NULL
/* where to search */
#define GO500_BASE DEFAULT_BASE
/* port on which to listen */
#define GO500_PORT 5555
/* how to handle aliases */
#define GO500_DEREF LDAP_DEREF_FINDING
/* attribute to use when sorting results */
#define GO500_SORT_ATTR SORT_ATTR
/* timeout for searches */
#define GO500_TIMEOUT 180
/* enable ufn support */
#define GO500_UFN
/*
* only set and uncomment this if your hostname() does not return
* a fully qualified hostname
*/
/* #define GO500_HOSTNAME "fully.qualified.hostname.here" */
/* number of DN components to show in entry displays */
#define GO500_RDNCOUNT DEFAULT_RDNCOUNT
/*
* GO500GW GOPHER GATEWAY DEFINITIONS
*/
/* who to bind as */
#define GO500GW_BINDDN NULL
/* where the helpfile lives */
#define GO500GW_HELPFILE "%ETCDIR%/go500gw.help"
/* port on which to listen */
#define GO500GW_PORT 7777
/* timeout on all searches */
#define GO500GW_TIMEOUT 180
/* enable ufn support */
#define GO500GW_UFN
/* attribute to use when sorting results */
#define GO500GW_SORT_ATTR SORT_ATTR
/*
* only set and uncomment this if your hostname() does not return
* a fully qualified hostname
*/
/* #define GO500GW_HOSTNAME "fully.qualified.hostname.here" */
/* number of DN components to show in entry displays */
#define GO500GW_RDNCOUNT DEFAULT_RDNCOUNT
/*
* RCPT500 MAIL RESPONDER GATEWAY DEFINITIONS
*/
/* who to bind as */
#define RCPT500_BINDDN NULL
/* where the helpfile lives */
#define RCPT500_HELPFILE "%ETCDIR%/rcpt500.help"
/* maximum number of matches returned */
#define RCPT500_SIZELIMIT 50
/* address replies will appear to come from */
#define RCPT500_FROM "\"X.500 Query Program\" <X500-Query>"
/* command that will accept an RFC822 message text on standard
input, and send it. sendmail -t does this nicely. */
#define RCPT500_PIPEMAILCMD "/usr/lib/sendmail -t"
/* where to search */
#define RCPT500_BASE DEFAULT_BASE
/* attribute to use when sorting results */
#define RCPT500_SORT_ATTR SORT_ATTR
/* max number of hits displayed in full before a list is presented */
#define RCPT500_LISTLIMIT 1
/* enable ufn support */
#define RCPT500_UFN
/* number of DN components to show in entry displays */
#define RCPT500_RDNCOUNT DEFAULT_RDNCOUNT
/*
* LDAPSEARCH TOOL
*/
/* who to bind as */
#define LDAPSEARCH_BINDDN NULL
/* search base */
#define LDAPSEARCH_BASE DEFAULT_BASE
/*
* LDAPMODIFY TOOL
*/
/* who to bind as */
#define LDAPMODIFY_BINDDN NULL
/* search base */
#define LDAPMODIFY_BASE DEFAULT_BASE
/*
* LDAPDELETE TOOL
*/
/* who to bind as */
#define LDAPDELETE_BINDDN NULL
/* search base */
#define LDAPDELETE_BASE DEFAULT_BASE
/*
* LDAPMODRDN TOOL
*/
/* who to bind as */
#define LDAPMODRDN_BINDDN NULL
/* search base */
#define LDAPMODRDN_BASE DEFAULT_BASE
/*
* MAIL500 MAILER DEFINITIONS
*/
/* who to bind as */
#define MAIL500_BINDDN NULL
/* max number of ambiguous matches reported */
#define MAIL500_MAXAMBIGUOUS 10
/* max subscribers allowed (size limit when searching for them ) */
#define MAIL500_MAXGROUPMEMBERS LDAP_NO_LIMIT
/* timeout for all searches */
#define MAIL500_TIMEOUT 180
/* sendmail location - mail500 needs to exec this */
#define MAIL500_SENDMAIL "/usr/lib/sendmail"
/*
* UD DEFINITIONS
*/
/* ud configuration file */
#define UD_CONFIG_FILE "%ETCDIR%/ud.conf"
/* default editor */
#define UD_DEFAULT_EDITOR "/usr/ucb/vi"
/* default bbasename of user config file */
#define UD_USER_CONFIG_FILE ".udrc"
/* default user to bind as */
#define UD_BINDDN NULL
/* default password to bind with */
#define UD_PASSWD NULL
/* default search base */
#define UD_BASE DEFAULT_BASE
/* default base where groups are created */
#define UD_WHERE_GROUPS_ARE_CREATED ""
/* default base below which all groups live */
#define UD_WHERE_ALL_GROUPS_LIVE ""
/*
* FAX500 DEFINITIONS
*/
/* what to bind as */
#define FAX_BINDDN NULL
/* how long to wait for searches */
#define FAX_TIMEOUT 180
/* maximum number of ambiguous matches reported */
#define FAX_MAXAMBIGUOUS 10
/* maximum number of members allowed */
#define FAX_MAXMEMBERS LDAP_NO_LIMIT
/* program to send mail */
#define FAX_SENDMAIL "/usr/lib/sendmail"
/*
* RP500 DEFINITIONS
*/
/* what to bind as */
#define RP_BINDDN NULL
/* prefix to add to non-fully-qualified numbers */
#define RP_PHONEPREFIX ""
/*
* SLAPD DEFINITIONS
*/
/* location of the default slapd config file */
#define SLAPD_DEFAULT_CONFIGFILE "%ETCDIR%/slapd.conf"
/* default sizelimit on number of entries from a search */
#define SLAPD_DEFAULT_SIZELIMIT 500
/* default timelimit to spend on a search */
#define SLAPD_DEFAULT_TIMELIMIT 3600
/* location of the slapd pid file */
#define SLAPD_PIDFILE "%ETCDIR%/slapd.pid"
/* location of the slapd args file */
#define SLAPD_ARGSFILE "%ETCDIR%/slapd.args"
/* dn of the special "monitor" entry */
#define SLAPD_MONITOR_DN "cn=monitor"
/* dn of the special "config" entry */
#define SLAPD_CONFIG_DN "cn=config"
/* minimum max ids that a single index entry can map to in ldbm */
#define SLAPD_LDBM_MIN_MAXIDS 4000
#endif /* _CONFIG_H */
/*
* Copyright (c) 1994 Regents of the University of Michigan.
* All rights reserved.
*
* Redistribution and use in source and binary forms are permitted
* provided that this notice is preserved and that due credit is given
* to the University of Michigan at Ann Arbor. The name of the University
* may not be used to endorse or promote products derived from this
* software without specific prior written permission. This software
* is provided ``as is'' without express or implied warranty.
*/
#ifndef _CONFIG_H
#define _CONFIG_H
/*
* config.h for LDAP -- edit this file to customize LDAP client behavior.
* NO platform-specific definitions should be placed in this file.
* Note that this is NOT used by the LDAP or LBER libraries.
*/
/*
* SHARED DEFINITIONS - things you should change
*/
/* default ldap host */
#define LDAPHOST "ldap.itd.umich.edu"
/* default place to start searching */
#define DEFAULT_BASE "o=University of Michigan, c=US"
/*********************************************************************
* *
* You probably do not need to edit anything below this point *
* *
*********************************************************************/
/*
* SHARED DEFINITIONS - other things you can change
*/
/* default attribute to use when sorting entries, NULL => sort by DN */
#define SORT_ATTR NULL
/* default count of DN components to show in entry displays */
#define DEFAULT_RDNCOUNT 2
/* default config file locations */
#define FILTERFILE "%ETCDIR%/ldapfilter.conf"
#define TEMPLATEFILE "%ETCDIR%/ldaptemplates.conf"
#define SEARCHFILE "%ETCDIR%/ldapsearchprefs.conf"
#define FRIENDLYFILE "%ETCDIR%/ldapfriendly"
/*
* FINGER DEFINITIONS
*/
/* who to bind as */
#define FINGER_BINDDN "cn=finger, ou=Miscellaneous Servers, o=University of Michigan, c=US"
/* where to search */
#define FINGER_BASE DEFAULT_BASE
/* banner to print */
#define FINGER_BANNER "X.500 Finger Service...\r\n"
/* who to report errors to */
#define FINGER_ERRORS "x500@umich.edu"
/* what to say if no matches are found */
#define FINGER_NOMATCH \
"Search failed to find anything. Currently, this service contains\r\n\
information only on University of Michigan faculty, staff, and students.\r\n\
Other likely places to finger are:\r\n\
um.cc.umich.edu\r\n\
azure.engin.umich.edu\r\n"
/* what to say if the service may be unavailable */
#define FINGER_UNAVAILABLE \
"The X.500 service may be temporarily unavailable.\r\n\
Please try again later.\r\n"
/* printed if a match has no email address - for disptmp default */
#define FINGER_NOEMAIL1 "None registered in this service. Try fingering at:"
#define FINGER_NOEMAIL2 "um.cc.umich.edu or azure.engin.umich.edu"
#define FINGER_NOEMAIL { FINGER_NOEMAIL1, FINGER_NOEMAIL2, NULL }
/* maximum number of matches returned */
#define FINGER_SIZELIMIT 50
/* max number of hits displayed in full before a list is presented */
#define FINGER_LISTLIMIT 1
/* what to exec for "finger @host" */
#define FINGER_CMD "/usr/ucb/finger"
/* how to treat aliases when searching */
#define FINGER_DEREF LDAP_DEREF_FINDING
/* attribute to use when sorting results */
#define FINGER_SORT_ATTR SORT_ATTR
/* enable ufn support */
#define FINGER_UFN
/* timeout for searches */
#define FINGER_TIMEOUT 60
/* number of DN components to show in entry displays */
#define FINGER_RDNCOUNT DEFAULT_RDNCOUNT
/*
* GO500 GOPHER GATEWAY DEFINITIONS
*/
/* who to bind as */
#define GO500_BINDDN "cn=go500, ou=Miscellaneous Servers, o=University of Michigan, c=US"
/* where to search */
#define GO500_BASE DEFAULT_BASE
/* port on which to listen */
#define GO500_PORT 5555
/* how to handle aliases */
#define GO500_DEREF LDAP_DEREF_FINDING
/* attribute to use when sorting results */
#define GO500_SORT_ATTR SORT_ATTR
/* timeout for searches */
#define GO500_TIMEOUT 60
/* enable ufn support */
#define GO500_UFN
/*
* only set and uncomment this if your hostname() does not return
* a fully qualified hostname
*/
/* #define GO500_HOSTNAME "fully.qualified.hostname.here" */
/* number of DN components to show in entry displays */
#define GO500_RDNCOUNT DEFAULT_RDNCOUNT
/*
* GO500GW GOPHER GATEWAY DEFINITIONS
*/
/* who to bind as */
#define GO500GW_BINDDN "cn=go500gw, ou=Miscellaneous Servers, o=University of Michigan, c=US"