Commit 2a869f5a authored by Kurt Zeilenga's avatar Kurt Zeilenga
Browse files

merged with autoconf branch

parent 708e5abb
......@@ -12,13 +12,14 @@ distribution. Information concerning is available at
This work also contains materials derived from public sources.
University of Michagan LDAP v3.3 Copyright Notice
Copyright (c) 1992-1996 Regents of the University of Michigan.
All rights reserved.
---
Redistribution and use in source and binary forms are permitted
provided that this notice is preserved and that due credit is given
to the University of Michigan at Ann Arbor. The name of the University
may not be used to endorse or promote products derived from this
software without specific prior written permission. This software
is provided ``as is'' without express or implied warranty.
Portions Copyright (c) 1992-1996 Regents of the University of Michigan.
All rights reserved.
Redistribution and use in source and binary forms are permitted
provided that this notice is preserved and that due credit is given
to the University of Michigan at Ann Arbor. The name of the University
may not be used to endorse or promote products derived from this
software without specific prior written permission. This software
is provided ``as is'' without express or implied warranty.
......@@ -17,72 +17,50 @@ these steps:
If you are reading this file, you probably have already done this!
2. copy Make-common.dist or Make-common.gmake to Make.common
2. Type:
% ./configure --help
3. edit the files Make-common and include/ldapconfig.h.edit to configure
the software for your site (the files are well-commented):
to list available configuration options. A description of
these options is provided in the 'CONFIGURE OPTIONS' section
below.
% vi Make-common
% vi include/ldapconfig.h.edit
The configure script will also use your environmental
variables for determining compiler/linker options.
Note that you should NOT need to edit the Makefile located at the
top of the distribution.
These environment variables are used:
CC C Compiler (cc, ecgs)
CFLAGS C Flags (-ansi)
CPPFLAGS CPP Flags (-I/path/include -Ddef)
LDFLAGS LDFLAGS (-L/path/lib -llib)
If you just want to see if things will build, you can leave the
configuration alone and change it later. You may want to consult
the appropriate platform makefile (build/*/Make-platform) for
platform-specific defaults.
A list of defines and other options are noted in the
'DEFINES and FLAGS' comments below.
If you have the ISODE package built and want to build the
LDAP-to-X.500 server (ldapd), be sure to uncomment the appropriate
lines near the end of the Make-common file. By default only the
stand-alone server, LDAP libraries and client software are built.
3. edit the file include/ldapconfig.h.edit to configure
the software for your site (the files are well-commented):
4. make the software:
% vi include/ldapconfig.h.edit
% make
4. Configure the build system
If all goes well, then make will figure out what platform you are on,
pick a compiler to use, construct Makefiles, and build everything.
If you see a message like "unknown platform..." LDAP has probably not
been set up to build on your machine. See the file build/PORTS for
hints on what to do in that case.
Note that if your make does not use the Bourne (sh) shell by
default when executing internal scripts (reportedly the case on SGI
machines at least), you will need to run the make explicitly from
within a Bourne shell. If you a syntax error such as "Missing ]"
when you do the make under your usual shell, try this:
% sh
$ make
If you don't like the some of the platform-specific options chosen
by the automatic build process (such as the compiler to use, etc),
you can intervene and edit them before anything is actually compiled
by explicitly doing a "make platform" step, editing the .make-platform
file (actually a link to the file to be edited), and then doing a
regular make:
% make platform
% vi .make-platform
% make
% [env settings] ./configure [options]
If you want to choose the build platform yourself from among those that
the distribution supports, cd to the appropriate directory underneath
build/platforms and make from there. For example, if you are on a
machine running SunOS 4.1.4 and you want to force the use of the cc
compiler, you would do this:
If all goes well, the configure script with auto-detect the
appropriate settings. Use configure enable/with options and/or
environment variables to obtain desired results.
% cd build/platforms/sunos4-cc
% make
5. Build dependencies
If you want to run some simple tests after the build is complete, you
can do this:
% make depend
% make test
6. Build the system
% make
5. install the binaries and man pages. You may need to be superuser to
If all goes well, the system will build as configured. If not,
return to step 4 after reviewing the enable/with options settings.
7. install the binaries and man pages. You may need to be superuser to
do this (depending on where you are installing things):
% su
......@@ -104,34 +82,47 @@ these steps:
Building LDAP For More Than One Platform
It is now possible to build LDAP for more than one platform from the same
source tree. This is accomplished by some rules in the Makefiles that
create a shadow (linked) directory tree where the binaries are placed.
source tree. This is accomplished by using make(1) VPATH support. If
your make(1) program is old and doesn't have VPATH support, install GNU
Make.
Follow these steps for each different platform:
1. move to the directory that matches the platform and compiler you
want to build for and type make. The directories are all located
underneath the build/platforms directory. If your platform is not
there, you may need to do a port - see the build/PORTS file for
more information. For a Sun running SunOS 4.1.4, you might do
this:
1. Create a directory for the platform object files.
% cd build/platforms/sunos4-cc
% make links
% mkdir obj-platform
This will create a linked source area.
2. Change your working directory to the platform object directory.
% cd obj-platform
2. move to the new directory and make as for a single platform. Follow steps
1-4 above to accomplish this. For example:
3. Configure the build system
% cd obj-sunos4-cc
% make
% [env settings] ../configure --src-dir=.. [options]
( replace ".." with the appropriate path )
4. Continue as above (starting at step 6).
Note: make depend in VPATH environment is not yet supported.
CONFIGURE OPTIONS
Regrettably, this section has not been written (yet). See
"./configure --help" for current list of options.
DEFINES and FLAGS
That's all there is to it. You can also create the linked source area(s)
by just typing "make links" at the top of the distribution, in which case
the Makefile will try to automatically determine the platform and
compiler.
The configure script will also use your environmental
variables for determining compiler/linker options. This can
be used to manual specify features and compilation options.
Supported Environmental Variables
CC C Compiler (cc, ecgs)
CFLAGS C Flags (-ansi)
CPPFLAGS CPP Flags (-I/path/include -Ddef)
LDFLAGS LDFLAGS (-L/path/lib -llib)
End of OpenLDAP INSTALL file.
#-----------------------------------------------------------------------------
# Copyright 1998 The OpenLDAP Foundation, Redwood City, California, USA
# All rights reserved.
#
# Redistribution and use in source and binary forms are permitted only
# as authorized by the OpenLDAP Public License. A copy of this
# license is available at http://www.OpenLDAP.org/license.html or
# in file LICENSE in the top-level directory of the distribution.
#
# This work is derived from the University of Michigan LDAP v3.3
# distribution. Information concerning is available at
# http://www.umich.edu/~dirsvcs/ldap/ldap.html.
#
# This work also contains materials derived from public sources.
#-----------------------------------------------------------------------------
# Copyright (c) 1994 Regents of the University of Michigan.
# All rights reserved.
#
# Redistribution and use in source and binary forms are permitted
# provided that this notice is preserved and that due credit is given
# to the University of Michigan at Ann Arbor. The name of the University
# may not be used to endorse or promote products derived from this
# software without specific prior written permission. This software
# is provided ``as is'' without express or implied warranty.
#-----------------------------------------------------------------------------
# LDAP common Make defines (included in all but top-level Makefile)
#############################################################################
## Edit the following variables to have appropriate values for your system ##
#############################################################################
#
# Note: Some make(1) programs do not understand the FOO?=BAR syntax.
#
# On such systems, you should use copy Make-common.gmake to Make-common
# and use gmake to build the distribution.
#
#############################################################################
## LDAP install paths ##
#############################################################################
# by default, everything is installed below INSTROOT
# config files, etc. are put in ETCDIR
# include files get put in INCLUDEDIR
# libraries are put in LIBDIR
# man pages are put under MANDIR
# programs end-users will run are put in BINDIR
# programs sysadmins will run are put in SBINDIR
# servers are put in LIBEXECDIR
# pid/args files are put in RUNDIR
#
# Per platform defaults override these.
#
LDAP_PREFIX?= /usr/local
LDAP_INSTROOT?= $(LDAP_PREFIX)
LDAP_ETCDIR?= $(LDAP_INSTROOT)/etc/ldap
LDAP_INCDIR?= $(LDAP_INSTROOT)/include
LDAP_LIBDIR?= $(LDAP_INSTROOT)/lib
LDAP_MANDIR?= $(LDAP_INSTROOT)/man
LDAP_BINDIR?= $(LDAP_INSTROOT)/bin
LDAP_SBINDIR?=$(LDAP_INSTROOT)/sbin
LDAP_LIBEXECDIR?= $(LDAP_INSTROOT)/libexec
LDAP_RUNDIR?= $(LDAP_ETCDIR)
#############################################################################
## General compiler options ##
#############################################################################
# Passed to every compile (cc or gcc). This is where you put -O or -g, etc.
#EXTRACFLAGS=-O -g
#EXTRACFLAGS=-O
EXTRACFLAGS?=-g
# Passed to every link (ld). Include -g here if you did in EXTRACFLAGS.
EXTRALDFLAGS?=-g
#############################################################################
## If you are NOT using Kerberos authentication, you can skip this section.##
#############################################################################
#
# Otherwise, to enable kerberos authentication, uncomment KERBEROS (and
# AFSKERBEROS if you are running the AFS version of kerberos). Also
# uncomment and change the various KRB* lines to point to where the
# kerberos libraries and include files are installed at your site.
#
# *** NOTE ***
# If you have an MIT Kerberos V distribution and you compiled it with -krb4
# flag which enables Kerberos IV compatibility, uncomment KERBEROS_V -
# this will make sure all your includes can be found where they actually are -
# in this case /usr/local/kerberos/include/kerberosIV - simple change of
# KRBINCLUDEFLAG will _not_ work. Also uncomment the correct KRBLIBS define.
#
# For Kerberos V with Kerberos IV compatibility uncomment the following line
#KERBEROS=-DKERBEROS -DKERBEROS_V
# For Kerberos IV uncomment the following line
#KERBEROS=-DKERBEROS
#
#AFSKERBEROS=-DAFSKERBEROS
#KRBINCLUDEFLAG = -I/usr/local/kerberos/include
#KRBLIBFLAG = -L/usr/local/kerberos/lib
# For Kerberos V with Kerberos IV compatibility uncomment the following line
#KRBLIBS = -lkrb4 -lkrb5 -ldes425
# For Kerberos IV uncomment the following line
#KRBLIBS = -lkrb -ldes
#############################################################################
## ISODE is required ONLY to build the ldap <-> X.500 server (ldapd) ##
## If you don't want to build it, you can skip this section. ##
#############################################################################
#
# To build the ldap server, uncomment the HAVEISODE line,
# and the section describing build settings for your version of isode.
#
#HAVEISODE = yes
# If you compiled ISODE with TURBO_DISK defined, uncomment this
#ISODETURBOLIBS = -lgdbm
# uncomment these to have ldapd "pretty print" protocol elements w/debugging
#PEPSY_DUMP=-DPEPSY_DUMP
#PEPSY=/usr/local/ic/bin/pepsy
# uncommment this line to have ldapd load PP syntax handlers
# you'll also need to add -lpp to ISODEBASELIBS below
#LDAP_USE_PP=-DLDAP_USE_PP
# uncomment NO_SETPROCTITLE to have ldapd NOT change its title
#NO_SETPROCTITLE=-DNOSETPROCTITLE
#
# ISODE Consortium release build settings
# You should change the next line so that ICRELEASE matches the (integer)
# version number of whatever IC release you have, e.g. 1, 2, or 3 and
# also uncomment the next 5 lines.
#ICRELEASE=-DICRELEASE=1
#ISODEPACKAGE=-DISODEPACKAGE=IC
#ISODEINCLUDEFLAG= -I/usr/local/ic/include/isode -I/usr/local/ic/include
#ISODELIBFLAG = -L/usr/local/ic/lib
#ISODEBASELIBS = -lisode
#
# Freely available ISODE 8.0 release build settings (uncomment the next 4 lines)
#ISODEPACKAGE=-DISODEPACKAGE
#ISODEINCLUDEFLAG= -I/usr/local/isode/include
#ISODELIBFLAG = -L/usr/local/isode/lib
#ISODEBASELIBS = -ldsap -lisode
#
# NEXOR ISODE release build settings (uncomment the next 4 lines)
#ISODEPACKAGE=-DISODEPACKAGE=XT
#ISODEINCLUDEFLAG= -I/usr/include/isode
#ISODELIBFLAG = -L/usr/local/lib -L/usr/sunlink/osi/lib
#ISODEBASELIBS = -lxtpp -lresolv -lxtdsap -lxtisode -losi
#############################################################################
## If you don't want to run slapd, skip this section. ##
#############################################################################
#
# To build slapd (the stand-alone ldap daemon), uncomment the MAKESLAPD
# line and select the SLAPD_BACKENDS you want to use. If you enable the
# LDBM backend, also select one of the LDBM backends.
MAKESLAPD= yes
#
# remove the defines for backends you don't want to enable
SLAPD_BACKENDS= -DLDAP_LDBM -DLDAP_SHELL -DLDAP_PASSWD
#
# If you have included -DLDAP_LDBM in the SLAPD_BACKENDS line,
# which low-level database package to use must be specified. You
# may want to overide the platform settings by disabling the lines
# below and hardcoding the desired settings.
#
# The four choices: Berkeley db b-tree, Berkeley db hash, GNU dbm, or ndbm.
# You will also need to edit the include and lib strings appropriately.
# standard unix ndbm
# Fallback settings, defaults are set in build/*/Make-platform
# The NDBM interface may not work on some (any) platforms.
# You may be happier with Berkeley DB B-trees.
LDBMBACKEND?=-DLDBM_USE_NDBM
LDBMINCLUDE?=
LDBMLIB?=
# LDBM Hardcode Setting Examples (may require editing)
# berkeley db btree package
#LDBMLIB=-ldb
#LDBMBACKEND=-DLDBM_USE_DBBTREE
#LDBMINCLUDE=-I/usr/local/db/include
#LDBMLIB?=-ldb
# berkeley db hash package
#LDBMBACKEND=-DLDBM_USE_DBHASH
#LDBMINCLUDE=-I/usr/local/db/include
#LDBMLIB=-ldb
# gnu dbm (gdbm)
#LDBMBACKEND=-DLDBM_USE_GDBM
#LDBMINCLUDE=-I/usr/local/gdbm/include
#LDBMLIB=-lgdbm
#undef these if you have SleepyCat DB2 installed the updated DBI
#LDBMBACKEND=-DLDBM_USE_DBBTREE -DLDBM_USE_DB2
#LDBMINCLUDE=-I/usr/local/include
#LDBMLIB=-L/usr/local/lib -ldb
#undef these if you have SleepyCat DB2 installed (with compat185)
#LDBMBACKEND=-DLDBM_USE_DBBTREE -DLDBM_USE_DB2_COMPAT185
#LDBMINCLUDE=-I/usr/local/include
#LDBMLIB=-L/usr/local/lib -ldb
# if you want to use a non-default threads package change the defines below
# to one of:
# -DPOSIX_THREADS (draft 10 or standard)
# -DTHREAD_MIT_PTHREADS (draft 4)
# -DTHREAD_NEXT_CTHREADS
# -DTHREAD_DCE_PTHREADS
# -DTHREAD_SUNOS4_LWP
# -DTHREAD_SUNOS5_LWP
# and select the appropriate library.
THREADS?=-DNO_THREADS
THREADSLIB?=
# Locations of auxilary programs
# (excepts to below are generally defined in Make-platform)
LDAP_SENDMAIL?=/usr/lib/sendmail
LDAP_EDITOR?=/usr/ucb/vi
LDAP_FINGER?=/usr/ucb/finger
# For generation of compressed man pages
# (excepts to below are generally defined in Make-platform)
MANCOMPRESS?=cat
MANCOMPRESSSUFFIX?=
#############################################################################
## The following options are used by the xax500 client. If you haven't ##
## retrieved the xax500 source and dropped it into the "clients" ##
## directory, you can skip this section. ##
#############################################################################
#
# location of your X include files
#XINCLUDES= -I/usr/X11/include
#
# location of your X libraries
#XLIBDIRS=-L/usr/X11/lib
#
# include any extra X libraries you need here
# the following works with sunos 4 and X11R5
#XLIBS = $(XLIBDIRS) -lXm -lXt -lX11
# the following has been known to work with Solaris 2.4 and X11R6
#XLIBS = $(XLIBDIRS) -lXm -lXext -lSM -lICE -lXpm -lXt -lX11
#############################################################################
## If you don't want to do auto-translation of character sets, skip this ##
#############################################################################
#
# Otherwise, uncomment this line and set the following options.
#STR_TRANSLATION=-DSTR_TRANSLATION
#
# remove the defines for LDAP client library T.61 character translation
# you do not need. If you use LDAP_CHARSET_8859, replace the '1' in "88591"
# with the number of the particular character set you use. E.g., use "88594"
# if you use the ISO 8859-4 chracter set.
#LIBLDAP_CHARSETS=-DLDAP_CHARSET_8859="88591"
#
# uncomment one these lines to enable automatic T.61 translation by default
#LIBLDAP_DEF_CHARSET=-DLDAP_DEFAULT_CHARSET=LDAP_CHARSET_8859
#############################################################################
## General options ##
#############################################################################
# uncomment this line to enable debugging code (a good idea)
LDAP_DEBUG=-DLDAP_DEBUG
# uncomment this line to turn on a few U of Michigan specific things
#UOFM=-DUOFM
# uncomment this line to delete a few printfs in the lber and ldap libraries.
#NO_USERINTERFACE=-DNO_USERINTERFACE
# uncomment this line to include Connectionless LDAP support
#CLDAP=-DCLDAP
# uncomment this line to eliminate local caching support in the libldap
#NO_CACHE=-DNO_CACHE
# uncomment this line to do reverse lookups (useful for doing ACLs
# by host/domain names)
LDAP_REVERSE_LOOKUP=-DREVERSE_LOOKUP
# uncomment this line to enable support for LDAP referrals in libldap
LDAP_REFERRALS=-DLDAP_REFERRALS
# uncomment this line to enable ACL by groups
# LDAP_ACLGROUP=-DACLGROUP
# uncomment these lines to enable support for CRYPT, SHA1, and/or MD5 passwords
# in LDBM. Crypt uses platform provided crypt(3).
# LDAP_CRYPT=-DLDAP_CRYPT -DLDAP_SHA1 -DLDAP_MD5
# LDAP_CRYPT_LIB?=
# and comment this line out
LDAP_CRYPT_LIB=
# uncomment these lines to enable support fro tcp_wrappers in servers.
# Requires tcp_wrappers.
# LDAP_TCP_WRAPPERS=-DTCP_WRAPPERS -I/usr/local/include
# LDAP_TCP_WRAPPERS_LIB=-L/usr/local/lib -lwrap
# uncomment this line to use soundex for approximate matches in slapd.
# the default is to use the metaphone algorithm.
#PHONETIC=-DSOUNDEX
#-----------------------------------------------------------------------------
# Copyright 1998 The OpenLDAP Foundation, Redwood City, California, USA
# All rights reserved.
#
# Redistribution and use in source and binary forms are permitted only
# as authorized by the OpenLDAP Public License. A copy of this
# license is available at http://www.OpenLDAP.org/license.html or
# in file LICENSE in the top-level directory of the distribution.
#
# This work is derived from the University of Michigan LDAP v3.3
# distribution. Information concerning is available at
# http://www.umich.edu/~dirsvcs/ldap/ldap.html.
#
# This work also contains materials derived from public sources.
#-----------------------------------------------------------------------------
# Copyright (c) 1994 Regents of the University of Michigan.
# All rights reserved.
#
# Redistribution and use in source and binary forms are permitted
# provided that this notice is preserved and that due credit is given
# to the University of Michigan at Ann Arbor. The name of the University
# may not be used to endorse or promote products derived from this
# software without specific prior written permission. This software
# is provided ``as is'' without express or implied warranty.
#-----------------------------------------------------------------------------
# LDAP common Make defines (included in all but top-level Makefile)
#############################################################################
## Edit the following variables to have appropriate values for your system ##
#############################################################################
#
# This template should be used by systems with Gnu Make.
#
# If Gnu make is not installed as make, you must uncomment out
# this line.
#MAKE=gmake
#############################################################################
## LDAP install paths ##
#############################################################################
# by default, everything is installed below INSTROOT
# config files, etc. are put in ETCDIR
# include files get put in INCLUDEDIR
# libraries are put in LIBDIR
# man pages are put under MANDIR
# programs end-users will run are put in BINDIR
# programs sysadmins will run are put in SBINDIR
# servers are put in LIBEXECDIR
# pid/args files are put in RUNDIR
#
# Per platform defaults override these.
#
ifndef LDAP_PREFIX
LDAP_PREFIX= /usr/local
endif
ifndef LDAP_INSTROOT
LDAP_INSTROOT= $(LDAP_PREFIX)
endif
ifndef LDAP_ETCDIR
LDAP_ETCDIR= $(LDAP_INSTROOT)/etc/ldap
endif
ifndef LDAP_INCDIR
LDAP_INCDIR= $(LDAP_INSTROOT)/include
endif
ifndef LDAP_LIBDIR
LDAP_LIBDIR= $(LDAP_INSTROOT)/lib
endif
ifndef LDAP_MANDIR
LDAP_MANDIR= $(LDAP_INSTROOT)/man
endif
ifndef LDAP_BINDIR
LDAP_BINDIR= $(LDAP_INSTROOT)/bin
endif
ifndef LDAP_SBINDIR
LDAP_SBINDIR=$(LDAP_INSTROOT)/sbin
endif
ifndef LDAP_LIBEXECDIR
LDAP_LIBEXECDIR= $(LDAP_INSTROOT)/libexec
endif
ifndef LDAP_RUNDIR
LDAP_RUNDIR= $(LDAP_ETCDIR)
endif
#############################################################################
## General compiler options ##
#############################################################################
# Passed to every compile (cc or gcc). This is where you put -O or -g, etc.
#EXTRACFLAGS=-O -g
#EXTRACFLAGS=-O
ifndef EXTRACFLAGS
EXTRACFLAGS?=-g
endif
# Passed to every link (ld). Include -g here if you did in EXTRACFLAGS.
ifndef EXTRALDFLAGS
EXTRALDFLAGS=-g
endif
#############################################################################
## If you are NOT using Kerberos authentication, you can skip this section.##
#############################################################################
#
# Otherwise, to enable kerberos authentication, uncomment KERBEROS (and
# AFSKERBEROS if you are running the AFS version of kerberos). Also
# uncomment and change the various KRB* lines to point to where the
# kerberos libraries and include files are installed at your site.
#
# *** NOTE ***
# If you have an MIT Kerberos V distribution and you compiled it with -krb4
# flag which enables Kerberos IV compatibility, uncomment KERBEROS_V -
# this will make sure all your includes can be found where they actually are -
# in this case /usr/local/kerberos/include/kerberosIV - simple change of
# KRBINCLUDEFLAG will _not_ work. Also uncomment the correct KRBLIBS define.
#
# For Kerberos V with Kerberos IV compatibility uncomment the following line
#KERBEROS=-DKERBEROS -DKERBEROS_V
# For Kerberos IV uncomment the following line
#KERBEROS=-DKERBEROS
#
#AFSKERBEROS=-DAFSKERBEROS
#KRBINCLUDEFLAG = -I/usr/local/kerberos/include
#KRBLIBFLAG = -L/usr/local/kerberos/lib
# For Kerberos V with Kerberos IV compatibility uncomment the following line
#KRBLIBS = -lkrb4 -lkrb5 -ldes425
# For Kerberos IV uncomment the following line
#KRBLIBS = -lkrb -ldes
#############################################################################
## ISODE is required ONLY to build the ldap <-> X.500 server (ldapd) ##
## If you don't want to build it, you can skip this section. ##
#############################################################################
#
# To build the ldap server, uncomment the HAVEISODE line,
# and the section describing build settings for your version of isode.
#
#HAVEISODE = yes
# If you compiled ISODE with TURBO_DISK defined, uncomment this
#ISODETURBOLIBS = -lgdbm
# uncomment these to have ldapd "pretty print" protocol elements w/debugging
#PEPSY_DUMP=-DPEPSY_DUMP
#PEPSY=/usr/local/ic/bin/pepsy
# uncommment this line to have ldapd load PP syntax handlers
# you'll also need to add -lpp to ISODEBASELIBS below
#LDAP_USE_PP=-DLDAP_USE_PP
# uncomment NO_SETPROCTITLE to have ldapd NOT change its title
#NO_SETPROCTITLE=-DNOSETPROCTITLE
#
# ISODE Consortium release build settings
# You should change the next line so that ICRELEASE matches the (integer)
# version number of whatever IC release you have, e.g. 1, 2, or 3 and
# also uncomment the next 5 lines.
#ICRELEASE=-DICRELEASE=1
#ISODEPACKAGE=-DISODEPACKAGE=IC
#ISODEINCLUDEFLAG= -I/usr/local/ic/include/isode -I/usr/local/ic/include
#ISODELIBFLAG = -L/usr/local/ic/lib
#ISODEBASELIBS = -lisode
#
# Freely available ISODE 8.0 release build settings (uncomment the next 4 lines)
#ISODEPACKAGE=-DISODEPACKAGE
#ISODEINCLUDEFLAG= -I/usr/local/isode/include
#ISODELIBFLAG = -L/usr/local/isode/lib
#ISODEBASELIBS = -ldsap -lisode
#