Commit b12a395b authored by Pierangelo Masarati's avatar Pierangelo Masarati
Browse files

make sure replication finished before comparing data (under valgrind, replication may take ages)

parent 08ddb6f1
......@@ -34,15 +34,15 @@ mkdir -p $TESTDIR $PRODIR $CONDIR $DBPRO $DBCON $CFPRO $CFCON
#
# Test replication of dynamic config:
# - start master
# - start slave
# - start producer
# - start consumer
# - configure over ldap
# - populate over ldap
# - configure syncrepl over ldap
# - retrieve database over ldap and compare against expected results
#
echo "Starting master slapd on TCP/IP port $PORT1..."
echo "Starting producer slapd on TCP/IP port $PORT1..."
$SLAPADD -F $CFPRO -n 0 -l $DYNAMICCONF
cd $PRODIR
$SLAPD -F ./slapd.d -h $URI1 -d $LVL $TIMING > ../$LOG1 2>&1 &
......@@ -56,7 +56,7 @@ cd ../..
sleep 1
echo "Using ldapsearch to check that master slapd is running..."
echo "Using ldapsearch to check that producer slapd is running..."
for i in 0 1 2 3 4 5; do
$LDAPSEARCH -s base -b "" -H $URI1 \
'objectclass=*' > /dev/null 2>&1
......@@ -74,7 +74,7 @@ if test $RC != 0 ; then
exit $RC
fi
echo "Inserting syncprov overlay on master..."
echo "Inserting syncprov overlay on producer..."
if [ "$SYNCPROV" = syncprovmod ]; then
$LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF > $TESTOUT 2>&1
dn: cn=module,cn=config
......@@ -115,7 +115,7 @@ if test $RC != 0 ; then
exit $RC
fi
echo "Starting slave slapd on TCP/IP port $PORT2..."
echo "Starting consumer slapd on TCP/IP port $PORT2..."
$SLAPADD -F $CFCON -n 0 -l $DYNAMICCONF
cd $CONDIR
$SLAPD -F ./slapd.d -h $URI2 -d $LVL $TIMING > ../$LOG2 2>&1 &
......@@ -129,7 +129,7 @@ cd ../..
sleep 1
echo "Using ldapsearch to check that slave slapd is running..."
echo "Using ldapsearch to check that consumer slapd is running..."
for i in 0 1 2 3 4 5; do
$LDAPSEARCH -s base -b "" -H $URI2 \
'objectclass=*' > /dev/null 2>&1
......@@ -147,7 +147,7 @@ if test $RC != 0 ; then
exit $RC
fi
echo "Configuring syncrepl on slave..."
echo "Configuring syncrepl on consumer..."
$LDAPMODIFY -D cn=config -H $URI2 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
dn: olcDatabase={0}config,cn=config
changetype: modify
......@@ -160,10 +160,31 @@ add: olcUpdateRef
olcUpdateRef: $URI1
EOF
echo "Waiting 10 seconds for syncrepl to receive changes..."
sleep 10
SLEEP=10
echo "Waiting $SLEEP seconds for syncrepl to receive changes..."
sleep $SLEEP
echo "Adding schema and databases on master..."
echo "Using ldapsearch to check that syncrepl received config changes..."
RC=32
for i in 0 1 2 3 4 5; do
RESULT=`$LDAPSEARCH -H $URI2 -D cn=config -y $CONFIGPWF \
-s base -b "olcDatabase={0}config,cn=config" \
'(olcUpdateRef=*)' 2>&1 | awk '/^dn:/ {print "OK"}'`
if test "x$RESULT" = "xOK" ; then
RC=0
break
fi
echo "Waiting 5 seconds for syncrepl to receive changes..."
sleep 5
done
if test $RC != 0 ; then
echo "ldapsearch failed ($RC)!"
test $KILLSERVERS != no && kill -HUP $KILLPIDS
exit $RC
fi
echo "Adding schema and databases on producer..."
$LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
include: file:$SCHEMADIR/core.ldif
......@@ -225,7 +246,7 @@ if test $RC != 0 ; then
exit $RC
fi
echo "Using ldapadd to populate master..."
echo "Using ldapadd to populate producer..."
$LDAPADD -D "$MANAGERDN" -H $URI1 -w $PASSWD -f $LDIFORDERED \
>> $TESTOUT 2>&1
RC=$?
......@@ -235,79 +256,100 @@ if test $RC != 0 ; then
exit $RC
fi
echo "Waiting 20 seconds for syncrepl to receive changes..."
sleep 20
SLEEP=20
echo "Waiting $SLEEP seconds for syncrepl to receive changes..."
sleep $SLEEP
echo "Using ldapsearch to check that syncrepl received database changes..."
RC=32
for i in 0 1 2 3 4 5; do
RESULT=`$LDAPSEARCH -H $URI2 \
-s base -b "cn=Ursula Hampster,ou=Alumni Association,ou=People,dc=example,dc=com" \
'(objectClass=*)' 2>&1 | awk '/^dn:/ {print "OK"}'`
if test "x$RESULT" = "xOK" ; then
RC=0
break
fi
echo "Waiting 5 seconds for syncrepl to receive changes..."
sleep 5
done
if test $RC != 0 ; then
echo "ldapsearch failed ($RC)!"
test $KILLSERVERS != no && kill -HUP $KILLPIDS
exit $RC
fi
echo "Using ldapsearch to read config from the master..."
echo "Using ldapsearch to read config from the producer..."
$LDAPSEARCH -b cn=config -D cn=config -H $URI1 -y $CONFIGPWF \
'objectclass=*' > $MASTEROUT 2>&1
RC=$?
if test $RC != 0 ; then
echo "ldapsearch failed at master ($RC)!"
echo "ldapsearch failed at producer ($RC)!"
test $KILLSERVERS != no && kill -HUP $KILLPIDS
exit $RC
fi
echo "Using ldapsearch to read config from the slave..."
echo "Using ldapsearch to read config from the consumer..."
$LDAPSEARCH -b cn=config -D cn=config -H $URI2 -y $CONFIGPWF \
'objectclass=*' > $SLAVEOUT 2>&1
RC=$?
if test $RC != 0 ; then
echo "ldapsearch failed at slave ($RC)!"
echo "ldapsearch failed at consumer ($RC)!"
test $KILLSERVERS != no && kill -HUP $KILLPIDS
exit $RC
fi
echo "Filtering master results..."
echo "Filtering producer results..."
. $LDIFFILTER < $MASTEROUT > $MASTERFLT
echo "Filtering slave results..."
echo "Filtering consumer results..."
. $LDIFFILTER < $SLAVEOUT > $SLAVEFLT
echo "Comparing retrieved entries from master and slave..."
echo "Comparing retrieved configs from producer and consumer..."
$CMP $MASTERFLT $SLAVEFLT > $CMPOUT
if test $? != 0 ; then
echo "test failed - master and slave databases differ"
echo "test failed - producer and consumer configs differ"
test $KILLSERVERS != no && kill -HUP $KILLPIDS
exit 1
fi
echo "Using ldapsearch to read all the entries from the master..."
echo "Using ldapsearch to read all the entries from the producer..."
$LDAPSEARCH -S "" -b "$BASEDN" -D "$MANAGERDN" -H $URI1 -w $PASSWD \
'objectclass=*' > $MASTEROUT 2>&1
RC=$?
if test $RC != 0 ; then
echo "ldapsearch failed at master ($RC)!"
echo "ldapsearch failed at producer ($RC)!"
test $KILLSERVERS != no && kill -HUP $KILLPIDS
exit $RC
fi
echo "Using ldapsearch to read all the entries from the slave..."
echo "Using ldapsearch to read all the entries from the consumer..."
$LDAPSEARCH -S "" -b "$BASEDN" -D "$MANAGERDN" -H $URI2 -w $PASSWD \
'objectclass=*' > $SLAVEOUT 2>&1
RC=$?
if test $RC != 0 ; then
echo "ldapsearch failed at slave ($RC)!"
echo "ldapsearch failed at consumer ($RC)!"
test $KILLSERVERS != no && kill -HUP $KILLPIDS
exit $RC
fi
test $KILLSERVERS != no && kill -HUP $KILLPIDS
echo "Filtering master results..."
echo "Filtering producer results..."
. $LDIFFILTER < $MASTEROUT > $MASTERFLT
echo "Filtering slave results..."
echo "Filtering consumer results..."
. $LDIFFILTER < $SLAVEOUT > $SLAVEFLT
echo "Comparing retrieved entries from master and slave..."
echo "Comparing retrieved entries from producer and consumer..."
$CMP $MASTERFLT $SLAVEFLT > $CMPOUT
if test $? != 0 ; then
echo "test failed - master and slave databases differ"
echo "test failed - producer and consumer databases differ"
exit 1
fi
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment