configure

	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-referrals" 1>&2; exit 1; }
	fi
	ol_enable_referrals="$ol_arg"

else
  	ol_enable_referrals="yes"
fi
# end --enable-referrals
# OpenLDAP --enable-cldap
	# Check whether --enable-cldap or --disable-cldap was given.
if test "${enable_cldap+set}" = set; then
  enableval="$enable_cldap"
  
	ol_arg=invalid
	for ol_val in auto yes no ; do
		if test "$enableval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-cldap" 1>&2; exit 1; }
	fi
	ol_enable_cldap="$ol_arg"

else
  	ol_enable_cldap="no"
fi
# end --enable-cldap
# OpenLDAP --enable-x_compile
	# Check whether --enable-x_compile or --disable-x_compile was given.
if test "${enable_x_compile+set}" = set; then
  enableval="$enable_x_compile"
  
	ol_arg=invalid
	for ol_val in yes no ; do
		if test "$enableval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-x_compile" 1>&2; exit 1; }
	fi
	ol_enable_x_compile="$ol_arg"

else
  	ol_enable_x_compile="no"
fi
# end --enable-x_compile

# OpenLDAP --enable-dmalloc
	# Check whether --enable-dmalloc or --disable-dmalloc was given.
if test "${enable_dmalloc+set}" = set; then
  enableval="$enable_dmalloc"
  
	ol_arg=invalid
	for ol_val in auto yes no ; do
		if test "$enableval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-dmalloc" 1>&2; exit 1; }
	fi
	ol_enable_dmalloc="$ol_arg"

else
  	ol_enable_dmalloc="no"
fi
# end --enable-dmalloc

# OpenLDAP --with-kerberos
	# Check whether --with-kerberos or --without-kerberos was given.
if test "${with_kerberos+set}" = set; then
  withval="$with_kerberos"
  
	ol_arg=invalid
	for ol_val in auto k5 k4 afs yes no ; do
		if test "$withval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $withval for --with-kerberos" 1>&2; exit 1; }
	fi
	ol_with_kerberos="$ol_arg"

else
  	ol_with_kerberos="auto"
fi
# end --with-kerberos

# OpenLDAP --with-readline
	# Check whether --with-readline or --without-readline was given.
if test "${with_readline+set}" = set; then
  withval="$with_readline"
  
	ol_arg=invalid
	for ol_val in auto yes no  ; do
		if test "$withval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $withval for --with-readline" 1>&2; exit 1; }
	fi
	ol_with_readline="$ol_arg"

else
  	ol_with_readline="auto"
fi
# end --with-readline

# OpenLDAP --with-threads
	# Check whether --with-threads or --without-threads was given.
if test "${with_threads+set}" = set; then
  withval="$with_threads"
  
	ol_arg=invalid
	for ol_val in auto posix mach lwp yes no manual  ; do
		if test "$withval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $withval for --with-threads" 1>&2; exit 1; }
	fi
	ol_with_threads="$ol_arg"

else
  	ol_with_threads="auto"
fi
# end --with-threads

# OpenLDAP --with-tls
	# Check whether --with-tls or --without-tls was given.
if test "${with_tls+set}" = set; then
  withval="$with_tls"
  
	ol_arg=invalid
	for ol_val in auto ssleay openssl yes no  ; do
		if test "$withval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $withval for --with-tls" 1>&2; exit 1; }
	fi
	ol_with_tls="$ol_arg"

else
  	ol_with_tls="auto"
fi
# end --with-tls

# OpenLDAP --with-yielding_select
	# Check whether --with-yielding_select or --without-yielding_select was given.
if test "${with_yielding_select+set}" = set; then
  withval="$with_yielding_select"
  
	ol_arg=invalid
	for ol_val in auto yes no manual  ; do
		if test "$withval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $withval for --with-yielding_select" 1>&2; exit 1; }
	fi
	ol_with_yielding_select="$ol_arg"

else
  	ol_with_yielding_select="auto"
fi
# end --with-yielding_select



# Check whether --with-xxldapdoptions or --without-xxldapdoptions was given.
if test "${with_xxldapdoptions+set}" = set; then
  withval="$with_xxldapdoptions"
  :
fi

# OpenLDAP --enable-ldapd
	# Check whether --enable-ldapd or --disable-ldapd was given.
if test "${enable_ldapd+set}" = set; then
  enableval="$enable_ldapd"
  
	ol_arg=invalid
	for ol_val in auto yes no ; do
		if test "$enableval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-ldapd" 1>&2; exit 1; }
	fi
	ol_enable_ldapd="$ol_arg"

else
  	ol_enable_ldapd="no"
fi
# end --enable-ldapd

# Check whether --with-xxslapdoptions or --without-xxslapdoptions was given.
if test "${with_xxslapdoptions+set}" = set; then
  withval="$with_xxslapdoptions"
  :
fi

# OpenLDAP --enable-slapd
	# Check whether --enable-slapd or --disable-slapd was given.
if test "${enable_slapd+set}" = set; then
  enableval="$enable_slapd"
  
	ol_arg=invalid
	for ol_val in auto yes no ; do
		if test "$enableval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-slapd" 1>&2; exit 1; }
	fi
	ol_enable_slapd="$ol_arg"

else
  	ol_enable_slapd="yes"
fi
# end --enable-slapd
# OpenLDAP --enable-aclgroups
	# Check whether --enable-aclgroups or --disable-aclgroups was given.
if test "${enable_aclgroups+set}" = set; then
  enableval="$enable_aclgroups"
  
	ol_arg=invalid
	for ol_val in auto yes no ; do
		if test "$enableval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-aclgroups" 1>&2; exit 1; }
	fi
	ol_enable_aclgroups="$ol_arg"

else
  	ol_enable_aclgroups="auto"
fi
# end --enable-aclgroups
# OpenLDAP --enable-cleartext
	# Check whether --enable-cleartext or --disable-cleartext was given.
if test "${enable_cleartext+set}" = set; then
  enableval="$enable_cleartext"
  
	ol_arg=invalid
	for ol_val in auto yes no ; do
		if test "$enableval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-cleartext" 1>&2; exit 1; }
	fi
	ol_enable_cleartext="$ol_arg"

else
  	ol_enable_cleartext="yes"
fi
# end --enable-cleartext
# OpenLDAP --enable-crypt
	# Check whether --enable-crypt or --disable-crypt was given.
if test "${enable_crypt+set}" = set; then
  enableval="$enable_crypt"
  
	ol_arg=invalid
	for ol_val in auto yes no ; do
		if test "$enableval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-crypt" 1>&2; exit 1; }
	fi
	ol_enable_crypt="$ol_arg"

else
  	ol_enable_crypt="auto"
fi
# end --enable-crypt
# OpenLDAP --enable-modules
	# Check whether --enable-modules or --disable-modules was given.
if test "${enable_modules+set}" = set; then
  enableval="$enable_modules"
  
	ol_arg=invalid
	for ol_val in auto yes no ; do
		if test "$enableval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-modules" 1>&2; exit 1; }
	fi
	ol_enable_modules="$ol_arg"

else
  	ol_enable_modules="no"
fi
# end --enable-modules
# OpenLDAP --enable-phonetic
	# Check whether --enable-phonetic or --disable-phonetic was given.
if test "${enable_phonetic+set}" = set; then
  enableval="$enable_phonetic"
  
	ol_arg=invalid
	for ol_val in auto yes no ; do
		if test "$enableval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-phonetic" 1>&2; exit 1; }
	fi
	ol_enable_phonetic="$ol_arg"

else
  	ol_enable_phonetic="no"
fi
# end --enable-phonetic
# OpenLDAP --enable-rlookups
	# Check whether --enable-rlookups or --disable-rlookups was given.
if test "${enable_rlookups+set}" = set; then
  enableval="$enable_rlookups"
  
	ol_arg=invalid
	for ol_val in auto yes no ; do
		if test "$enableval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-rlookups" 1>&2; exit 1; }
	fi
	ol_enable_rlookups="$ol_arg"

else
  	ol_enable_rlookups="auto"
fi
# end --enable-rlookups
# OpenLDAP --enable-wrappers
	# Check whether --enable-wrappers or --disable-wrappers was given.
if test "${enable_wrappers+set}" = set; then
  enableval="$enable_wrappers"
  
	ol_arg=invalid
	for ol_val in auto yes no ; do
		if test "$enableval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-wrappers" 1>&2; exit 1; }
	fi
	ol_enable_wrappers="$ol_arg"

else
  	ol_enable_wrappers="no"
fi
# end --enable-wrappers

# OpenLDAP --enable-bdb2
	# Check whether --enable-bdb2 or --disable-bdb2 was given.
if test "${enable_bdb2+set}" = set; then
  enableval="$enable_bdb2"
  
	ol_arg=invalid
	for ol_val in auto yes no ; do
		if test "$enableval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-bdb2" 1>&2; exit 1; }
	fi
	ol_enable_bdb2="$ol_arg"

else
  	ol_enable_bdb2="no"
fi
# end --enable-bdb2
# OpenLDAP --enable-ldap
	# Check whether --enable-ldap or --disable-ldap was given.
if test "${enable_ldap+set}" = set; then
  enableval="$enable_ldap"
  
	ol_arg=invalid
	for ol_val in auto yes no ; do
		if test "$enableval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-ldap" 1>&2; exit 1; }
	fi
	ol_enable_ldap="$ol_arg"

else
  	ol_enable_ldap="no"
fi
# end --enable-ldap
# OpenLDAP --enable-ldbm
	# Check whether --enable-ldbm or --disable-ldbm was given.
if test "${enable_ldbm+set}" = set; then
  enableval="$enable_ldbm"
  
	ol_arg=invalid
	for ol_val in auto yes no ; do
		if test "$enableval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-ldbm" 1>&2; exit 1; }
	fi
	ol_enable_ldbm="$ol_arg"

else
  	ol_enable_ldbm="yes"
fi
# end --enable-ldbm
# OpenLDAP --with-ldbm_api
	# Check whether --with-ldbm_api or --without-ldbm_api was given.
if test "${with_ldbm_api+set}" = set; then
  withval="$with_ldbm_api"
  
	ol_arg=invalid
	for ol_val in auto db2 db mdbm gdbm ndbm manual ; do
		if test "$withval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $withval for --with-ldbm_api" 1>&2; exit 1; }
	fi
	ol_with_ldbm_api="$ol_arg"

else
  	ol_with_ldbm_api="auto"
fi
# end --with-ldbm_api

# OpenLDAP --with-ldbm_type
	# Check whether --with-ldbm_type or --without-ldbm_type was given.
if test "${with_ldbm_type+set}" = set; then
  withval="$with_ldbm_type"
  
	ol_arg=invalid
	for ol_val in auto btree hash ; do
		if test "$withval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $withval for --with-ldbm_type" 1>&2; exit 1; }
	fi
	ol_with_ldbm_type="$ol_arg"

else
  	ol_with_ldbm_type="auto"
fi
# end --with-ldbm_type


# OpenLDAP --enable-passwd
	# Check whether --enable-passwd or --disable-passwd was given.
if test "${enable_passwd+set}" = set; then
  enableval="$enable_passwd"
  
	ol_arg=invalid
	for ol_val in auto yes no ; do
		if test "$enableval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-passwd" 1>&2; exit 1; }
	fi
	ol_enable_passwd="$ol_arg"

else
  	ol_enable_passwd="no"
fi
# end --enable-passwd
# OpenLDAP --enable-perl
	# Check whether --enable-perl or --disable-perl was given.
if test "${enable_perl+set}" = set; then
  enableval="$enable_perl"
  
	ol_arg=invalid
	for ol_val in auto yes no ; do
		if test "$enableval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-perl" 1>&2; exit 1; }
	fi
	ol_enable_perl="$ol_arg"

else
  	ol_enable_perl="no"
fi
# end --enable-perl
# OpenLDAP --enable-shell
	# Check whether --enable-shell or --disable-shell was given.
if test "${enable_shell+set}" = set; then
  enableval="$enable_shell"
  
	ol_arg=invalid
	for ol_val in auto yes no ; do
		if test "$enableval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-shell" 1>&2; exit 1; }
	fi
	ol_enable_shell="$ol_arg"

else
  	ol_enable_shell="no"
fi
# end --enable-shell
# OpenLDAP --enable-tcl
	# Check whether --enable-tcl or --disable-tcl was given.
if test "${enable_tcl+set}" = set; then
  enableval="$enable_tcl"
  
	ol_arg=invalid
	for ol_val in auto yes no ; do
		if test "$enableval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-tcl" 1>&2; exit 1; }
	fi
	ol_enable_tcl="$ol_arg"

else
  	ol_enable_tcl="no"
fi
# end --enable-tcl

# Check whether --with-xxslurpdoptions or --without-xxslurpdoptions was given.
if test "${with_xxslurpdoptions+set}" = set; then
  withval="$with_xxslurpdoptions"
  :
fi

# OpenLDAP --enable-slurpd
	# Check whether --enable-slurpd or --disable-slurpd was given.
if test "${enable_slurpd+set}" = set; then
  enableval="$enable_slurpd"
  
	ol_arg=invalid
	for ol_val in auto yes no ; do
		if test "$enableval" = "$ol_val" ; then
			ol_arg="$ol_val"
		fi
	done
	if test "$ol_arg" = "invalid" ; then
		{ echo "configure: error: bad value $enableval for --enable-slurpd" 1>&2; exit 1; }
	fi
	ol_enable_slurpd="$ol_arg"

else
  	ol_enable_slurpd="auto"
fi
# end --enable-slurpd

# Check whether --with-xxliboptions or --without-xxliboptions was given.
if test "${with_xxliboptions+set}" = set; then
  withval="$with_xxliboptions"
  :
fi

# Check whether --enable-static or --disable-static was given.
if test "${enable_static+set}" = set; then
  enableval="$enable_static"
  p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
  enable_static=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_static=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
else
  enable_static=yes
fi

# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
  enableval="$enable_shared"
  p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
  enable_shared=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_shared=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
else
  enable_shared=yes
fi


# validate options
if test $ol_enable_dns = yes ; then
	if test $ol_enable_referrals = no ; then
		{ echo "configure: error: DNS requires --enable-referrals" 1>&2; exit 1; }
	fi
	if test $ol_enable_referrals = auto ; then
		echo "configure: warning: DNS requires referrals, adding --enable-referrals" 1>&2
		ol_enable_referrals=yes
	fi
fi

if test $ol_enable_slapd = no ; then
		if test $ol_enable_bdb2 = yes ; then
		echo "configure: warning: slapd disabled, ignoring --enable-bdb2 argument" 1>&2
	fi
	if test $ol_enable_ldap = yes ; then
		echo "configure: warning: slapd disabled, ignoring --enable-ldap argument" 1>&2
	fi
	if test $ol_enable_ldbm = yes ; then
		echo "configure: warning: slapd disabled, ignoring --enable-ldbm argument" 1>&2
	fi
	if test $ol_enable_passwd = yes ; then
		echo "configure: warning: slapd disabled, ignoring --enable-passwd argument" 1>&2
	fi
	if test $ol_enable_perl = yes ; then
		echo "configure: warning: slapd disabled, ignoring --enable-perl argument" 1>&2
	fi
	if test $ol_enable_shell = yes ; then
		echo "configure: warning: slapd disabled, ignoring --enable-shell argument" 1>&2
	fi
	if test $ol_enable_tcl = yes ; then
		echo "configure: warning: slapd disabled, ignoring --enable-tcl argument" 1>&2
	fi
	if test $ol_enable_aclgroups = yes ; then
		echo "configure: warning: slapd disabled, ignoring --enable-aclgroups argument" 1>&2
	fi
	if test $ol_enable_modules = yes ; then
		echo "configure: warning: slapd disabled, ignoring --enable-modules argument" 1>&2
	fi
	if test $ol_enable_wrappers = yes ; then
		echo "configure: warning: slapd disabled, ignoring --enable-wrappers argument" 1>&2
	fi
	if test $ol_enable_phonetic = yes ; then
		echo "configure: warning: slapd disabled, ignoring --enable-phonetic argument" 1>&2
	fi
	if test $ol_enable_rlookups = yes ; then
		echo "configure: warning: slapd disabled, ignoring --enable-rlookups argument" 1>&2
	fi
	if test $ol_with_ldbm_api != auto ; then
		echo "configure: warning: slapd disabled, ignoring --with-ldbm-api argument" 1>&2
	fi
	if test $ol_with_ldbm_type != auto ; then
		echo "configure: warning: slapd disabled, ignoring --with-ldbm-type argument" 1>&2
	fi
	if test $ol_enable_slurpd = yes ; then
		{ echo "configure: error: slurpd requires slapd" 1>&2; exit 1; }
	fi

	# force settings to no
	ol_enable_bdb2=no
	ol_enable_ldap=no
	ol_enable_ldbm=no
	ol_enable_passwd=no
	ol_enable_perl=no
	ol_enable_shell=no
	ol_enable_tcl=no

	ol_enable_aclgroups=no
	ol_enable_modules=no
	ol_enable_phonetic=no
	ol_enable_rlookups=no
	ol_enable_wrappers=no

	ol_with_ldbm_api=no
	ol_with_ldbm_type=no

	ol_enable_slurpd=no

elif test $ol_enable_ldbm = no ; then
	
	if test $ol_with_ldbm_api != auto ; then
		echo "configure: warning: LDBM disabled, ignoring --with-ldbm-api argument" 1>&2
	fi

	if test $ol_with_ldbm_type != auto ; then
		echo "configure: warning: LDBM disabled, ignoring --with-ldbm-type argument" 1>&2
	fi

	if test $ol_enable_bdb2 = yes ; then
		{ echo "configure: error: BDB2 requires --enable-ldbm" 1>&2; exit 1; }
	fi

	if test $ol_enable_modules != yes -a \
		$ol_enable_ldap = no -a \
		$ol_enable_passwd = no -a \
		$ol_enable_perl = no -a \
		$ol_enable_shell = no -a \
		$ol_enable_tcl = no ; then
		{ echo "configure: error: slapd requires a backend" 1>&2; exit 1; }
	fi

	ol_with_ldbm_api=no
	ol_with_ldbm_type=no

elif test $ol_enable_bdb2 = yes ; then
	
	if test $ol_with_ldbm_api != auto -a \
		$ol_with_ldbm_api != db2 ; then
		{ echo "configure: error: BDB2 requires LDBM API DB2" 1>&2; exit 1; }
	fi

	ol_with_ldbm_api=db2

else
	
	if test $ol_enable_bdb2 != no ; then
		if test $ol_with_ldbm_api != auto -a \
			$ol_with_ldbm_api != db2 ; then
			echo "configure: warning: BDB2 requires LDBM api db2 or auto" 1>&2
			ol_enable_bdb2=no
		fi
	fi

	if test $ol_with_ldbm_api = gdbm -a \
		$ol_with_ldbm_type = btree ; then
		{ echo "configure: error: GDBM only supports LDBM type hash" 1>&2; exit 1; }
	fi
	if test $ol_with_ldbm_api = mdbm -a \
		$ol_with_ldbm_type = btree ; then
		{ echo "configure: error: MDBM only supports LDBM type hash" 1>&2; exit 1; }
	fi
	if test $ol_with_ldbm_api = ndbm -a \
		$ol_with_ldbm_type = btree ; then
		{ echo "configure: error: NDBM only supports LDBM type hash" 1>&2; exit 1; }
	fi
fi

if test $ol_enable_slurpd = yes ; then
		if test $ol_with_threads = no ; then
		{ echo "configure: error: slurpd requires threads" 1>&2; exit 1; }
	fi
fi

echo "$ac_t""done" 1>&6

## Initialize vars
LDAP_LIBS=
LDBM_LIBS=
LTHREAD_LIBS=
LUTIL_LIBS=

LDAPD_LIBS=
SLAPD_LIBS=
SLURPD_LIBS=

BUILD_LDAPD=no
BUILD_SLAPD=no
BUILD_SLURPD=no

BUILD_BDB2=no
BUILD_LDAP=no
BUILD_LDBM=no
BUILD_PASSWD=no
BUILD_PERL=no
BUILD_SHELL=no
BUILD_TCL=no
BUILD_THREAD=no

SLAPD_MODULES_LDFLAGS=
SLAPD_MODULES_CPPFLAGS=

SLAPD_PERL_LDFLAGS=
SLAPD_PERL_CPPFLAGS=

KRB_LIBS=
READLINE_LIBS=
TERMCAP_LIBS=
TLS_LIBS=



CC=${CC-"cc"}


# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi

echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:1829: checking host system type" >&5

host_alias=$host
case "$host_alias" in
NONE)
  case $nonopt in
  NONE)
    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
    fi ;;
  *) host_alias=$nonopt ;;
  esac ;;
esac

host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6

# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1852: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$RANLIB"; then
  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_RANLIB="ranlib"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
  echo "$ac_t""$RANLIB" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1882: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="gcc"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$CC"; then
  # Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1912: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_prog_rejected=no
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
	continue
      fi
      ac_cv_prog_CC="cc"
      break
    fi
  done
  IFS="$ac_save_ifs"
if test $ac_prog_rejected = yes; then
  # We found a bogon in the path, so make sure we never use it.
  set dummy $ac_cv_prog_CC
  shift
  if test $# -gt 0; then
    # We chose a different compiler from the bogus one.
    # However, it has the same basename, so the bogon will be chosen
    # first if we set CC to just the basename; use the full file name.
    shift
    set dummy "$ac_dir/$ac_word" "$@"
    shift
    ac_cv_prog_CC="$@"
  fi
fi
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  if test -z "$CC"; then
    case "`uname -s`" in
    *win32* | *WIN32*)
      # Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1963: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="cl"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
 ;;
    esac
  fi
  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi

echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:1995: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'